mirror of
https://github.com/SoftEtherVPN/SoftEtherVPN.git
synced 2025-04-03 18:00:08 +03:00
Update strtable_ru.stb
This commit is contained in:
djony
GitHub
parent
a0fa4ac1ad
commit
faaf7e3531
198
strtable_ru.stb
198
strtable_ru.stb
@ -1,5 +1,6 @@
|
||||
# SoftEther VPN String Table
|
||||
# Copyright (c) SoftEther VPN Project. All Rights Reserved.
|
||||
# Copyright (c) Daiyuu Nobori, SoftEther Project at University of Tsukuba, and SoftEther Corporation.
|
||||
#
|
||||
# http://www.softether.co.jp/
|
||||
|
||||
@ -394,7 +395,7 @@ PW_RETRYCOUNT Автоматическое переподключение бу
|
||||
PW_LOGIN_DLG_TITLE Вход
|
||||
PW_TYPE_0 Анонимный вход
|
||||
PW_TYPE_1 Авторизация по логину и паролю
|
||||
PW_TYPE_2 RADIUS или доменная авторизация
|
||||
PW_TYPE_2 RADIUS или авторизация в домене
|
||||
PW_TYPE_3 Авторизация по сертификату
|
||||
PW_TYPE_4 Авторизация по смарт-карте
|
||||
|
||||
@ -575,6 +576,7 @@ ERRDLG_DEVICE_ERROR Соединение с VPN-сервером отключе
|
||||
PROTO_DIRECT_TCP Прямое TCP/IP подключение
|
||||
PROTO_HTTP_PROXY Подключение через HTTP-прокси
|
||||
PROTO_SOCKS_PROXY Подключение через SOCKS-прокси
|
||||
PROTO_SOCKS5_PROXY Подключение через SOCKS5-прокси
|
||||
PROTO_SSH Подключение через SSH-сервер
|
||||
PROTO_UNKNOWN Неизвестный протокол
|
||||
|
||||
@ -936,6 +938,8 @@ CM_STOP_INST_VLAN_1 To install a Virtual Network Adapter on this computer you m
|
||||
CM_STOP_INST_VLAN_2 To install a Virtual Network Adapter on this computer you must start the VPN Client Manager within a "Console Session". \r\n\r\nCurrently, %s is installed on this computer and the current user is not logged into the Console Session but rather is logged in as the remote session (session ID: %u).\r\nTo install a Virtual Network Adapter you must start the VPN Client Manager within a "Console Session". \r\n(Currently the user is not logged on to the Console Session (Session ID: 0).) \r\n\r\nFirst log on to the computer locally by using the user switching function, or the /console switch function that is on the remote desktop, or alternatively the computer's local console device and then start the VPN Client Manager and install the Virtual Network Adapter.
|
||||
CM_SHORTCUT_DESKTOP_MSG To start a connection using the shortcut to the VPN Connection Setting, you must launch the shortcut file within the "Console Session". \r\n\r\nCurrently the user is logged on as the remote session (session ID: %u) and not as the Console Session.
|
||||
CM_HTTP_PROXY_WARNING Connect via HTTP Proxy Server is selected. \r\n\r\nIn many cases, the HTTP proxy server will only allow 2 kinds of TCP port to be used for the connection to the destination server port number, HTTP protocol (TCP port number 80) and HTTPS protocol (TCP port number 443). \r\n(There are also cases when the proxy server does allow a wider choice of TCP port for connection.) \r\n\r\nWhen making a VPN connection via an HTTP proxy server that denies connections to server ports other than HTTP ports or HTTPS ports, you must specify 443 (HTTPS protocol) as the destination VPN Server port number. \r\n\r\nTo check whether the HTTP proxy server you are connecting via allows connection to ports other than port numbers 80 or 443, contact the administrator of the HTTP proxy server. \r\n\r\nCurrently, %d is specified as the destination VPN Server port number. Do you want to change the port number to 443 (HTTPS protocol)?\r\n(The port 443 of the VPN Servers you connect to must be set to listening status and ready for connection.) \r\nIf you are unsure, then contact the system administrator or the network administrator.
|
||||
CM_HTTP_HEADER_COLUMN_0 Name
|
||||
CM_HTTP_HEADER_COLUMN_1 Value
|
||||
CM_PASSWORD_CHANGED The password has been changed.
|
||||
CM_ACCOUNT_SETTING_FILE VPN Connection Setting Files (*.VPN)|*.vpn|All Files (*.*)|*.*
|
||||
CM_ACCOUNT_SAVE_TITLE Enter a VPN Connection Setting File's File Name for the Export Destination
|
||||
@ -1784,7 +1788,9 @@ LS_LICENSE_NOT_VPNSERVER Connection "%S": License error occurred. The VPN Client
|
||||
LS_LICENSE_NOT_VPNCLUSTER Connection "%S": License error occurred. The license registered on this VPN Server is of a type that prevents the use of the current clustering function and a VPN Client has attempted connection while operating in Cluster mode. You must restart the VPN Server.
|
||||
LS_LICENSE_VIOLATION Connection "%S": A license violation has occurred on the VPN Server and connections are not being received.
|
||||
LS_LICENSE_VIOLATION_DETECTED A license violation has been detected. A different VPN Server is operating with the same server ID "%I64u" as this VPN Server. It is possible that there are two or more VPN Servers in the cluster that are using the same license. Check the license information of each VPN Server.
|
||||
|
||||
LS_API_AUTH_OK HTTPS API client "%r:%u" (%S): Administration mode: "%S": The embedded HTTPS web server accepted the successful login. Username: "%S", Method: "%S", Path: "%S"
|
||||
LS_API_AUTH_ERROR HTTPS API client "%r:%u" (%S): The embedded HTTPS web server refused a login attempt. Username: "%S", Method: "%S", Path: "%S"
|
||||
LS_API_RPC_CALL HTTPS API client "%r:%u" (%S): The client called a JSON-API. Method: "%S", Returned error code: %u (0 = success), Returned error message: "%s"
|
||||
|
||||
# (OpenVPN Logs)
|
||||
LO_PREFIX_RAW OpenVPN Module:
|
||||
@ -2340,6 +2346,7 @@ IDCANCEL Отмена
|
||||
STATIC6 (необязательно)
|
||||
STATIC7 (необязательно)
|
||||
|
||||
|
||||
PREFIX D_CM_PROXY_HTTP_HEADER
|
||||
CAPTION Пользовательские значения HTTP-заголовка прокси
|
||||
B_NEW Новый
|
||||
@ -2348,6 +2355,7 @@ B_CLEAR Очистить
|
||||
IDOK &OK
|
||||
IDCANCEL Отмена
|
||||
|
||||
|
||||
PREFIX D_CM_DETAIL
|
||||
CAPTION Расширенные настройки
|
||||
STATIC1 Дополнительные настройки для системных администраторов и экспертов по работе с сетью, протоколами связи и безопасностью. Настройки параметров VPN протокола.
|
||||
@ -2355,7 +2363,7 @@ STATIC2 Оптимизация VPN:
|
||||
STATIC3 Использование нескольких физических TCP-соединений для логического VPN-соединения для увеличения пропускной способности.
|
||||
STATIC4 &Количество TCP-соединений:
|
||||
STATIC5 соединения
|
||||
STATIC6 Примечание. Рекомендуется около 8 соединений для широкополосного доступа и 1 соединение для медленной линии (например, модем).
|
||||
STATIC6 Рекомендуется около 8 соединений для быстрых линий и 1 для медленных линии (например, модем).
|
||||
STATIC7 Расширенные настройки:
|
||||
STATIC8 Интервал TCP соединения:
|
||||
STATIC9 сек
|
||||
@ -2367,7 +2375,7 @@ R_USE_HALF_CONNECTION Использовать полудуплексный ре
|
||||
STATIC13 Шифрование и сжатие:
|
||||
STATIC14 Обычно VPN сессия шифруется для обеспечения безопасности. Вы можете отключить шифрование для повышения пропускной способности. Обратите внимание, что при отключении данные по сети передаются в открытом виде.
|
||||
R_USE_ENCRYPT &Шифровать VPN-сессию с помощью SSL
|
||||
STATIC15 Вы можете использовать сжатие данных для экономии пропускной способности VPN подключения. Включите эту опцию при использовании медленного подключения, например через модем или мобильный интернет.
|
||||
STATIC15 Вы можете использовать сжатие данных для экономии пропускной способности VPN подключения. Включите эту опцию при использовании медленных линий.
|
||||
R_DISABLE_UDP Отключить UDP ускорение
|
||||
R_USE_COMPRESS &Использовать сжатие данных
|
||||
STATIC16 Режим VPN подключения:
|
||||
@ -2376,12 +2384,12 @@ R_BRIDGE Режим Мост / Роутер
|
||||
R_MONITOR Режим Мониторинга
|
||||
STATIC17 Другие конфигурации:
|
||||
R_NO_ROUTING Не вносить изменения в таблицу маршрутизации
|
||||
STATIC18 Если системный администратор не попросил вас изменить эти параметры или у вас нет опыта работы с сетью и безопасностью, то оставьте настройки в этом диалоговом окне по умолчанию.
|
||||
STATIC19 Функции VoIP / QoS обрабатывают пакеты с высоким приоритетом для более быстрой передачи, такие как пакеты IP-телефонии (VoIP).
|
||||
STATIC18 Если у вас нет опыта работы с сетью и безопасностью, то оставьте настройки в этом окне по умолчанию.
|
||||
STATIC19 Функции VoIP/QoS обрабатывают пакеты с высоким приоритетом для более быстрой передачи, такие как VoIP.
|
||||
R_DISABLE_QOS Отключить функции VoIP / QoS
|
||||
IDOK &OK
|
||||
IDCANCEL Отмена
|
||||
S_UDPACCEL Вы можете использовать сжатие данных для экономии пропускной способности VPN подключения. Включите эту опцию при использовании медленного подключения, например через модем или мобильный интернет.
|
||||
S_UDPACCEL Вы можете использовать сжатие данных для экономии пропускной способности VPN подключения. Включите эту опцию при использовании медленных линий.
|
||||
|
||||
|
||||
PREFIX D_CM_NEW_VLAN
|
||||
@ -2515,6 +2523,7 @@ STATIC10 Proxy &Type:
|
||||
R_DIRECT_TCP &Direct TCP/IP Connection (No Proxy)
|
||||
R_HTTPS Connect via H&TTP Proxy Server
|
||||
R_SOCKS Connect via S&OCKS Proxy Server
|
||||
R_SOCKS5 Connect via S&OCKS5 Proxy Server
|
||||
B_PROXY_CONFIG P&roxy Server Setting
|
||||
STATIC11 Select Administration &Mode and Enter Password
|
||||
STATIC12 You can connect to VPN Server using either Server Admin Mode or Virtual Hub Admin Mode.\r\n\r\nServer Admin Mode allows you manage entire VPN Server and all Virtual Hubs. \r\n\r\nVirtual Hub Admin Mode allows you manage only one Virtual Hub for which you hold privileges.
|
||||
@ -4105,6 +4114,7 @@ STATIC10 Proxy &Type:
|
||||
R_DIRECT_TCP &Direct TCP/IP Connection (No Proxy)
|
||||
R_HTTPS Connect via H&TTP Proxy Server
|
||||
R_SOCKS Connect via S&OCKS Proxy Server
|
||||
R_SOCKS5 Connect via S&OCKS5 Proxy Server
|
||||
B_PROXY_CONFIG P&roxy Server Setting
|
||||
IDOK &OK
|
||||
IDCANCEL Cancel
|
||||
@ -4366,6 +4376,7 @@ CMD_ACCOUNT_COLUMN_PROXY_PORT Proxy Server Port Number
|
||||
CMD_ACCOUNT_COLUMN_PROXY_USERNAME Proxy Server User Name
|
||||
CMD_ACCOUNT_COLUMN_SERVER_CERT_USE Verify Server Certificate
|
||||
CMD_ACCOUNT_COLUMN_SERVER_CERT_NAME Registered Server Individual Certificate
|
||||
CMD_ACCOUNT_COLUMN_RETRY_ON_SERVER_CERT Retry on Untrusted Server Certificate
|
||||
CMD_ACCOUNT_COLUMN_DEVICE_NAME Device Name Used for Connection
|
||||
CMD_ACCOUNT_COLUMN_AUTH_TYPE Authentication Type
|
||||
CMD_ACCOUNT_COLUMN_AUTH_USERNAME User Name
|
||||
@ -4450,12 +4461,12 @@ CMD_VPNCMD_CMD If the optional command 'commands...' is included after /CMD, t
|
||||
CMD_VPNCMD_CSV You can specify this option to enable CSV outputs. Results of each command will be printed in the CSV format. It is useful for processing the results by other programs.
|
||||
CMD_VPNCMD_CS_1 By using vpncmd program, the following can be achieved. \n\n1. Management of VPN Server or VPN Bridge \n2. Management of VPN Client\n3. Use of VPN Tools (certificate creation and Network Traffic Speed Test Tool)\n\n
|
||||
CMD_VPNCMD_CS_2 Select 1, 2 or 3:
|
||||
CMD_VPNCMD_HOST_1 Specify the host name or IP address of the computer that the destination VPN Server or VPN Bridge is operating on. \nBy specifying according to the format 'host name:port number', you can also specify the port number. \n(When the port number is unspecified, 443 is used.)\nIf nothing is input and the Enter key is pressed, the connection will be made to the port number 8888 of localhost (this computer).
|
||||
CMD_VPNCMD_HOST_1 Specify the host name or IP address of the computer that the destination VPN Server or VPN Bridge is operating on. \nBy specifying according to the format 'host name:port number', you can also specify the port number. \n(When the port number is unspecified, 443 is used.)\nIf nothing is input and the Enter key is pressed, the connection will be made to the port number 443 of localhost (this computer).
|
||||
CMD_VPNCMD_HOST_2 Specify the host name or IP address of the computer that the destination VPN Client is operating on. \nIf nothing is input and Enter is pressed, connection will be made to localhost (this computer).
|
||||
CMD_VPNCMD_HOST_3 Hostname of IP Address of Destination:
|
||||
CMD_VPNCMD_HUB_1 If connecting to the server by Virtual Hub Admin Mode, please input the Virtual Hub name. \nIf connecting by server admin mode, please press Enter without inputting anything.
|
||||
CMD_VPNCMD_HUB_2 Specify Virtual Hub Name:
|
||||
CMD_VPNCMD_ABOUT SoftEther VPN Command Line Management Utility (vpncmd command)\nDeveloper Edition\n%S\n%S\nCopyright (c) SoftEther VPN Project. All Rights Reserved.\n
|
||||
CMD_VPNCMD_ABOUT SoftEther VPN Command Line Management Utility (vpncmd command)\nDeveloper Edition\n%S\n%S\nCopyright (c) all contributors on SoftEther VPN project in GitHub.\nCopyright (c) Daiyuu Nobori, SoftEther Project at University of Tsukuba, and SoftEther Corporation.\nAll rights reserved.\n
|
||||
CMD_VPNCMD_PASSWORD_1 Access has been denied. Possibly the password is incorrect, or perhaps you are connecting by an incorrect admin mode. You can try inputting the password again. To cancel, press Ctrl+D.
|
||||
CMD_VPNCMD_PASSWORD_2 Password:
|
||||
CMD_VPNCMD_ERROR Error occurred. (Error code: %u)\n%s
|
||||
@ -4679,6 +4690,21 @@ CMD_ServerCipherSet_Args ServerCipherSet [name]
|
||||
CMD_ServerCipherSet_[name] This specifies the encrypted and electronic signature algorithm to set. You can obtain the list of usable algorithms by using the ServerCipherGet command.
|
||||
CMD_ServerCipherSet_PROMPT_NAME Encrypted Algorithm Name to Specify:
|
||||
|
||||
# TUNDownOnDisconnectEnable command
|
||||
CMD_TUNDownOnDisconnectEnable Enable the Turn TUN Interface Down on Client Disconnect Function.
|
||||
CMD_TUNDownOnDisconnectEnable_Help This allows you to enable Turn TUN Interface Down on Client Disconnect Function.
|
||||
CMD_TUNDownOnDisconnectEnable_Args TUNDownOnDisconnectEnable
|
||||
|
||||
# TUNDownOnDisconnectDisable command
|
||||
CMD_TUNDownOnDisconnectDisable Disable the Turn TUN Interface Down on Client Disconnect Function.
|
||||
CMD_TUNDownOnDisconnectDisable_Help This allows you to disable Turn TUN Interface Down on Client Disconnect Function.
|
||||
CMD_TUNDownOnDisconnectDisable_Args TUNDownOnDisconnectDisable
|
||||
|
||||
# TUNDownOnDisconnectGet command
|
||||
CMD_TUNDownOnDisconnectGet Get status of the Turn TUN Interface Down on Client Disconnect Function.
|
||||
CMD_TUNDownOnDisconnectGet_Help This allows you to get status of the Turn TUN Interface Down on Client Disconnect Function.
|
||||
CMD_TUNDownOnDisconnectGet_Args TUNDownOnDisconnectGet
|
||||
CMD_TUNDownOnDisconnectGet_COLUMN1 Put TUN down on disconnect
|
||||
|
||||
# KeepEnable command
|
||||
CMD_KeepEnable Enable the Keep Alive Internet Connection Function
|
||||
@ -5301,6 +5327,35 @@ CMD_CascadeCompressDisable_Args CascadeCompressDisable [name]
|
||||
CMD_CascadeCompressDisable_[name] Specify the name of the Cascade Connection whose setting you want to change.
|
||||
|
||||
|
||||
# CascadeHttpHeader* commands
|
||||
CMD_CascadeHttpHeader_Prompt_Name Value name (part before the colon):
|
||||
CMD_CascadeHttpHeader_Prompt_Data Value data (part after the colon):
|
||||
|
||||
|
||||
# CascadeHttpHeaderAdd command
|
||||
CMD_CascadeHttpHeaderAdd Add a custom value in the HTTP header sent to the proxy server
|
||||
CMD_CascadeHttpHeaderAdd_Help Use this to add a custom value in the HTTP header sent to the proxy server. A custom HTTP header can be used to bypass certain restrictions imposed on the network or to avoid speed limitations applied by the QoS.
|
||||
CMD_CascadeHttpHeaderAdd_Args CascadeHttpHeaderAdd [name] [/NAME:name] [/DATA:data]
|
||||
CMD_CascadeHttpHeaderAdd_[name] Specify the name of the Cascade Connection whose setting you want to change.
|
||||
CMD_CascadeHttpHeaderAdd_NAME Specify the name of the custom value (the part before the colon character).
|
||||
CMD_CascadeHttpHeaderAdd_DATA Specify the data of the custom value (the part after the colon character).
|
||||
|
||||
|
||||
# CascadeHttpHeaderDelete command
|
||||
CMD_CascadeHttpHeaderDelete Delete a custom value in the HTTP header sent to the proxy server
|
||||
CMD_CascadeHttpHeaderDelete_Help Use this to delete a custom value in the HTTP header sent to the proxy server. A custom HTTP header can be used to bypass certain restrictions imposed on the network or to avoid speed limitations applied by the QoS.
|
||||
CMD_CascadeHttpHeaderDelete_Args CascadeHttpHeaderDelete [name] [/NAME:name]
|
||||
CMD_CascadeHttpHeaderDelete_[name] Specify the name of the Cascade Connection whose setting you want to change.
|
||||
CMD_CascadeHttpHeaderDelete_NAME Specify the name of the custom value (the part before the colon character).
|
||||
|
||||
|
||||
# CascadeHttpHeaderGet command
|
||||
CMD_CascadeHttpHeaderGet Get the list of custom values in the HTTP header sent to the proxy server
|
||||
CMD_CascadeHttpHeaderGet_Help Use this to get the list of custom values in the HTTP header sent to the proxy server. A custom HTTP header can be used to bypass certain restrictions imposed on the network or to avoid speed limitations applied by the QoS.
|
||||
CMD_CascadeHttpHeaderGet_Args CascadeHttpHeaderGet [name]
|
||||
CMD_CascadeHttpHeaderGet_[name] Specify the name of the Cascade Connection whose setting you want to get.
|
||||
|
||||
|
||||
# CascadeProxyNone command
|
||||
CMD_CascadeProxyNone Specify Direct TCP/IP Connection as the Connection Method of Cascade Connection
|
||||
CMD_CascadeProxyNone_Help When a Cascade Connection registered on the currently managed Virtual Hub is specified and that Cascade Connection connects to a VPN Server, use this to set Direct TCP/IP Connection as the connection method to use, in which case the connection route will not be via a proxy server. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster.
|
||||
@ -5319,15 +5374,24 @@ CMD_CascadeProxyHttp_PASSWORD When user authentication is required to connect to
|
||||
CMD_CascadeProxyHttp_Prompt_Server Proxy Server Host Name and Port Number:
|
||||
|
||||
|
||||
|
||||
# CascadeProxySocks command
|
||||
CMD_CascadeProxySocks Set Connection Method of Cascade Connection to be via an SOCKS Proxy Server
|
||||
CMD_CascadeProxySocks_Help When a Cascade Connection registered on the currently managed Virtual Hub is specified and that Cascade Connection connects to a VPN Server, use this to set Connect via SOCKS Proxy Server as the method of connection to use, which requires the specification of the host name and port number of the SOCKS Proxy server to communicate via as well as a user name and password (when required). \nThe on-route SOCKS server must be compatible with SOCKS Version 4. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster.
|
||||
CMD_CascadeProxySocks Set Connection Method of Cascade Connection to be via a SOCKS4 Proxy Server
|
||||
CMD_CascadeProxySocks_Help When a Cascade Connection registered on the currently managed Virtual Hub is specified and that Cascade Connection connects to a VPN Server, use this to set Connect via SOCKS4 Proxy Server as the method of connection to use, which requires the specification of the host name and port number of the SOCKS4 Proxy server to communicate via as well as a user name and password (when required). \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster.
|
||||
CMD_CascadeProxySocks_Args CascadeProxySocks [name] [/SERVER:hostname:port] [/USERNAME:username] [/PASSWORD:password]
|
||||
CMD_CascadeProxySocks_[name] Specify the name of the Cascade Connection whose setting you want to change.
|
||||
CMD_CascadeProxySocks_SERVER Specify the host name or IP address, and port number of the on-route SOCKS proxy server using the format "host name:port number".
|
||||
CMD_CascadeProxySocks_USERNAME When user authentication is required to connect to the on-route SOCKS proxy server, specify the user name. Also, specify the /PASSWORD parameter at the same time. If the parameters /USERNAME and /PASSWORD are not specified, the user authentication data will not be set.
|
||||
CMD_CascadeProxySocks_PASSWORD When user authentication is required to connect to the on-route SOCKS proxy server, specify the password. Specify this together with the /USERNAME parameter.
|
||||
CMD_CascadeProxySocks_SERVER Specify the host name or IP address, and port number of the on-route SOCKS4 proxy server using the format "host name:port number".
|
||||
CMD_CascadeProxySocks_USERNAME When user authentication is required to connect to the on-route SOCKS4 proxy server, specify the user name. Also, specify the /PASSWORD parameter at the same time. If the parameters /USERNAME and /PASSWORD are not specified, the user authentication data will not be set.
|
||||
CMD_CascadeProxySocks_PASSWORD When user authentication is required to connect to the on-route SOCKS4 proxy server, specify the password. Specify this together with the /USERNAME parameter.
|
||||
|
||||
|
||||
# CascadeProxySocks5 command
|
||||
CMD_CascadeProxySocks5 Set Connection Method of Cascade Connection to be via a SOCKS5 Proxy Server
|
||||
CMD_CascadeProxySocks5_Help When a Cascade Connection registered on the currently managed Virtual Hub is specified and that Cascade Connection connects to a VPN Server, use this to set Connect via SOCKS5 Proxy Server as the method of connection to use, which requires the specification of the host name and port number of the SOCKS Proxy server to communicate via as well as a user name and password (when required). \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster.
|
||||
CMD_CascadeProxySocks5_Args CascadeProxySocks5 [name] [/SERVER:hostname:port] [/USERNAME:username] [/PASSWORD:password]
|
||||
CMD_CascadeProxySocks5_[name] Specify the name of the Cascade Connection whose setting you want to change.
|
||||
CMD_CascadeProxySocks5_SERVER Specify the host name or IP address, and port number of the on-route SOCKS5 proxy server using the format "host name:port number".
|
||||
CMD_CascadeProxySocks5_USERNAME When user authentication is required to connect to the on-route SOCKS5 proxy server, specify the user name. Also, specify the /PASSWORD parameter at the same time. If the parameters /USERNAME and /PASSWORD are not specified, the user authentication data will not be set.
|
||||
CMD_CascadeProxySocks5_PASSWORD When user authentication is required to connect to the on-route SOCKS5 proxy server, specify the password. Specify this together with the /USERNAME parameter.
|
||||
|
||||
|
||||
# CascadeServerCertEnable command
|
||||
@ -6244,6 +6308,24 @@ CMD_OpenVpnMakeConfig_OK The sample setting file was saved as "%s". You can un
|
||||
CMD_OpenVpnMakeConfig_ERROR The sample setting files were unable to be saved as "%s". The filename might be invalid.\n
|
||||
|
||||
|
||||
# OpenVpnObfuscationEnable
|
||||
CMD_OpenVpnObfuscationEnable Enable / Disable the OpenVPN clone server function's obfuscation mode
|
||||
CMD_OpenVpnObfuscationEnable_Help This allows an OpenVPN client to bypass a firewall which is aware of the protocol and is able to block it.\nThe same XOR mask have to be applied to the client, otherwise it will not be able to connect with certain obfuscation methods!\nBeware that you need a special OpenVPN client with the "XOR patch" applied in order to use this function, because it has never been merged in the official OpenVPN repository.\n\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge.\nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster.
|
||||
CMD_OpenVpnObfuscationEnable_Args OpenVpnObfuscationEnable [yes|no] [/MASK:mask]
|
||||
CMD_OpenVpnObfuscationEnable_[yes|no] Specify "yes" to enable the OpenVPN obfuscation function. Specify "no" to disable it.
|
||||
CMD_OpenVpnObfuscationEnable_MASK Mask used to XOR the bytes in the packet (used for certain obfuscation modes).
|
||||
CMD_OpenVpnObfuscationEnable_Prompt_[yes|no] Enable OpenVPN packet obfuscation (yes / no):
|
||||
CMD_OpenVpnObfuscationEnable_Prompt_MASK XOR mask:
|
||||
|
||||
|
||||
# OpenVpnObfuscationGet
|
||||
CMD_OpenVpnObfuscationGet Get the current settings of the OpenVPN clone server function's obfuscation mode
|
||||
CMD_OpenVpnObfuscationGet_Help Get and show the current settings of the OpenVPN clone server function's obfuscation mode
|
||||
CMD_OpenVpnObfuscationGet_Args OpenVpnObfuscationGet
|
||||
CMD_OpenVpnObfuscationGet_PRINT_Enabled OpenVPN obfuscation enabled
|
||||
CMD_OpenVpnObfuscationGet_PRINT_Mask XOR mask
|
||||
|
||||
|
||||
# SstpEnable command
|
||||
CMD_SstpEnable Enable / Disable Microsoft SSTP VPN Clone Server Function
|
||||
CMD_SstpEnable_Help This VPN Server has the clone functions of MS-SSTP VPN Server which is on Windows Server 2008 / 2012 by Microsoft Corporation. Standard MS-SSTP Clients in Windows Vista / 7 / 8 / RT / 10 can connect to this VPN Server.\n\n[Caution]\nThe value of CN (Common Name) on the SSL certificate of VPN Server must match to the hostname specified on the client, and that certificate must be in the trusted list on the SSTP VPN client. For details refer the Microsoft's documents.\nYou can use the ServerCertRegenerate command to replace the current certificate on the VPN Server to a new self-signed certificate which has the CN (Common Name) value in the fields. In that case, you have to register such a new self-signed certificate on the SSTP VPN Client as a trusted root certificate. If you do not want to do such a bother tasks, please consider to purchase a SSL certificate provided by commercial authority such as VeriSign or GlobalSign.\n\nThe manner to specify a username to connect to the Virtual Hub, and the selection rule of default Hub by using this clone server functions are same to the IPsec Server functions. For details, please see the help of the IPsecEnable command.\n\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge.\nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster.
|
||||
@ -6588,6 +6670,35 @@ CMD_AccountCompressDisable_Args AccountCompressDisable [name]
|
||||
CMD_AccountCompressDisable_[name] Specify the name of the VPN Connection Setting whose setting you want to change.
|
||||
|
||||
|
||||
# AccountHttpHeader* commands
|
||||
CMD_AccountHttpHeader_Prompt_Name Value name (part before the colon):
|
||||
CMD_AccountHttpHeader_Prompt_Data Value data (part after the colon):
|
||||
|
||||
|
||||
# AccountHttpHeaderAdd command
|
||||
CMD_AccountHttpHeaderAdd Add a custom value in the HTTP header sent to the proxy server
|
||||
CMD_AccountHttpHeaderAdd_Help Use this to add a custom value in the HTTP header sent to the proxy server. A custom HTTP header can be used to bypass certain restrictions imposed on the network or to avoid speed limitations applied by the QoS.
|
||||
CMD_AccountHttpHeaderAdd_Args AccountHttpHeaderAdd [name] [/NAME:name] [/DATA:data]
|
||||
CMD_AccountHttpHeaderAdd_[name] Specify the name of the VPN Connection Setting whose setting you want to change.
|
||||
CMD_AccountHttpHeaderAdd_NAME Specify the name of the custom value (the part before the colon character).
|
||||
CMD_AccountHttpHeaderAdd_DATA Specify the data of the custom value (the part after the colon character).
|
||||
|
||||
|
||||
# AccountHttpHeaderDelete command
|
||||
CMD_AccountHttpHeaderDelete Delete a custom value in the HTTP header sent to the proxy server
|
||||
CMD_AccountHttpHeaderDelete_Help Use this to delete a custom value in the HTTP header sent to the proxy server. A custom HTTP header can be used to bypass certain restrictions imposed on the network or to avoid speed limitations applied by the QoS.
|
||||
CMD_AccountHttpHeaderDelete_Args AccountHttpHeaderDelete [name] [/NAME:name]
|
||||
CMD_AccountHttpHeaderDelete_[name] Specify the name of the VPN Connection Setting whose setting you want to change.
|
||||
CMD_AccountHttpHeaderDelete_NAME Specify the name of the custom value (the part before the colon character).
|
||||
|
||||
|
||||
# AccountHttpHeaderGet command
|
||||
CMD_AccountHttpHeaderGet Get the list of custom values in the HTTP header sent to the proxy server
|
||||
CMD_AccountHttpHeaderGet_Help Use this to get the list of custom values in the HTTP header sent to the proxy server. A custom HTTP header can be used to bypass certain restrictions imposed on the network or to avoid speed limitations applied by the QoS.
|
||||
CMD_AccountHttpHeaderGet_Args AccountHttpHeaderGet [name]
|
||||
CMD_AccountHttpHeaderGet_[name] Specify the name of the VPN Connection Setting whose setting you want to get.
|
||||
|
||||
|
||||
# AccountProxyNone command
|
||||
CMD_AccountProxyNone Specify Direct TCP/IP Connection as the Connection Method of VPN Connection Setting
|
||||
CMD_AccountProxyNone_Help When a VPN Connection Setting registered on the VPN Client is specified and that VPN Connection Setting connects to a VPN Server, use this to set Direct TCP/IP Connection as the connection method to use, in which case the connection route will not be via a proxy server.
|
||||
@ -6606,15 +6717,24 @@ CMD_AccountProxyHttp_PASSWORD When user authentication is required to connect to
|
||||
CMD_AccountProxyHttp_Prompt_Server Proxy Server Host Name and Port Number:
|
||||
|
||||
|
||||
|
||||
# AccountProxySocks command
|
||||
CMD_AccountProxySocks Set Connection Method of VPN Connection Setting to be via an SOCKS Proxy Server
|
||||
CMD_AccountProxySocks_Help When a VPN Connection Setting registered on the VPN Client is specified and that VPN Connection Setting connects to a VPN Server, use this to set Connect via SOCKS Proxy Server as the method of connection to use, which requires the specification of the host name and port number of the SOCKS Proxy server to communicate via as well as a user name and password (when required). \nThe on-route SOCKS server must be compatible with SOCKS Version 4.
|
||||
CMD_AccountProxySocks Set Connection Method of VPN Connection Setting to be via a SOCKS4 Proxy Server
|
||||
CMD_AccountProxySocks_Help When a VPN Connection Setting registered on the VPN Client is specified and that VPN Connection Setting connects to a VPN Server, use this to set Connect via SOCKS4 Proxy Server as the method of connection to use, which requires the specification of the host name and port number of the SOCKS4 Proxy server to communicate via as well as a user name and password (when required).
|
||||
CMD_AccountProxySocks_Args AccountProxySocks [name] [/SERVER:hostname:port] [/USERNAME:username] [/PASSWORD:password]
|
||||
CMD_AccountProxySocks_[name] Specify the name of the VPN Connection Setting whose setting you want to change.
|
||||
CMD_AccountProxySocks_SERVER Specify the host name or IP address, and port number of the on-route SOCKS proxy server using the format [host name:port number].
|
||||
CMD_AccountProxySocks_USERNAME When user authentication is required to connect to the on-route SOCKS proxy server, specify the user name. Also, specify the /PASSWORD parameter at the same time. If the parameters /USERNAME and /PASSWORD are not specified, the user authentication data will not be set.
|
||||
CMD_AccountProxySocks_PASSWORD When user authentication is required to connect to the on-route SOCKS proxy server, specify the password. Specify this together with the /USERNAME parameter.
|
||||
CMD_AccountProxySocks_SERVER Specify the host name or IP address, and port number of the on-route SOCKS4 proxy server using the format [host name:port number].
|
||||
CMD_AccountProxySocks_USERNAME When user authentication is required to connect to the on-route SOCKS4 proxy server, specify the user name. Also, specify the /PASSWORD parameter at the same time. If the parameters /USERNAME and /PASSWORD are not specified, the user authentication data will not be set.
|
||||
CMD_AccountProxySocks_PASSWORD When user authentication is required to connect to the on-route SOCKS4 proxy server, specify the password. Specify this together with the /USERNAME parameter.
|
||||
|
||||
|
||||
# AccountProxySocks5 command
|
||||
CMD_AccountProxySocks5 Set Connection Method of VPN Connection Setting to be via a SOCKS5 Proxy Server
|
||||
CMD_AccountProxySocks5_Help When a VPN Connection Setting registered on the VPN Client is specified and that VPN Connection Setting connects to a VPN Server, use this to set Connect via SOCKS5 Proxy Server as the method of connection to use, which requires the specification of the host name and port number of the SOCKS5 Proxy server to communicate via as well as a user name and password (when required).
|
||||
CMD_AccountProxySocks5_Args AccountProxySocks5 [name] [/SERVER:hostname:port] [/USERNAME:username] [/PASSWORD:password]
|
||||
CMD_AccountProxySocks5_[name] Specify the name of the VPN Connection Setting whose setting you want to change.
|
||||
CMD_AccountProxySocks5_SERVER Specify the host name or IP address, and port number of the on-route SOCKS5 proxy server using the format [host name:port number].
|
||||
CMD_AccountProxySocks5_USERNAME When user authentication is required to connect to the on-route SOCKS5 proxy server, specify the user name. Also, specify the /PASSWORD parameter at the same time. If the parameters /USERNAME and /PASSWORD are not specified, the user authentication data will not be set.
|
||||
CMD_AccountProxySocks5_PASSWORD When user authentication is required to connect to the on-route SOCKS5 proxy server, specify the password. Specify this together with the /USERNAME parameter.
|
||||
|
||||
|
||||
# AccountServerCertEnable command
|
||||
@ -6631,6 +6751,20 @@ CMD_AccountServerCertDisable_Args AccountServerCertDisable [name]
|
||||
CMD_AccountServerCertDisable_[name] Specify the name of the VPN Connection Setting whose setting you want to change.
|
||||
|
||||
|
||||
# AccountRetryOnServerCertEnable command
|
||||
CMD_AccountRetryOnServerCertEnable Enable VPN connection retry if server certificate is invalid
|
||||
CMD_AccountRetryOnServerCertEnable_Help When a VPN Connection Setting registered on the VPN Client is specified and that VPN Connection Setting connects to a VPN Server, use this to enable the option to retry connection if Server certificate cannot be trusted.
|
||||
CMD_AccountRetryOnServerCertEnable_Args AccountRetryOnServerCertEnable [name]
|
||||
CMD_AccountRetryOnServerCertEnable_[name] Specify the name of the VPN Connection Setting whose setting you want to change.
|
||||
|
||||
|
||||
# AccountRetryOnServerCertDisable command
|
||||
CMD_AccountRetryOnServerCertDisable Enable VPN connection retry if server certificate is invalid
|
||||
CMD_AccountRetryOnServerCertDisable_Help When a VPN Connection Setting registered on the VPN Client is specified and that VPN Connection Setting connects to a VPN Server, use this to disable the option to retry connection if Server certificate cannot be trusted.
|
||||
CMD_AccountRetryOnServerCertDisable_Args AccountRetryOnServerCertEnable [name]
|
||||
CMD_AccountRetryOnServerCertDisable_[name] Specify the name of the VPN Connection Setting whose setting you want to change.
|
||||
|
||||
|
||||
# AccountServerCertSet command
|
||||
CMD_AccountServerCertSet Set Server Individual Certificate for VPN Connection Setting
|
||||
CMD_AccountServerCertSet_Help When a VPN Connection Setting registered on the VPN Client is specified and that VPN Connection Setting connects to a VPN Server, use this to register the same certificate as the SSL certificate provided by the destination VPN Server. \nIf the option to verify server certificates for VPN Connection Settings is enabled, you must either use this command to save the connection destination server SSL certificate beforehand in the VPN Connection Setting settings beforehand, or use the CAAdd command etc. to register a root certificate containing the signed server SSL certificate in the list of Virtual Hub trusted CA certificates. \nIf the certificate of the connected VPN Server cannot be trusted under the condition where the option to verify server certificates has been enabled for the VPN Connection Setting, the connection will be promptly cancelled and continual reattempts at connection will be made.
|
||||
@ -7022,6 +7156,8 @@ SW_WEB2_TITLE Specify Files
|
||||
SW_UNINSTALLINFO_URL http://selinks.org/
|
||||
SW_UNINSTALLINFO_PUBLISHER SoftEther VPN Project
|
||||
|
||||
SW_KB3033929_REQUIRED In Windows 7 and Windows Server 2008 R2, some SoftEther VPN functions require the Microsoft's Windows Update module KB3033929 installed.\r\n\r\nIf KB3033929 is not installed in your Windows, please install it from Windows Update or Microsoft website before installing SoftEther VPN.
|
||||
|
||||
|
||||
SW_COMPONENTS_ABOUT_TAG About %s
|
||||
SW_COMPONENTS_REQUIRE_ADMIN Installation Requires Administrators Privileges
|
||||
@ -7181,23 +7317,3 @@ SW_LINK_NAME_LANGUAGE_COMMENT Change the display language setting of %s.
|
||||
|
||||
SW_LINK_NAME_DEBUG Debugging Information Collecting Tool
|
||||
SW_LINK_NAME_DEBUG_COMMENT Collects debugging information of SoftEther VPN. Use this tool only if your support staff asks you to do so.
|
||||
|
||||
CMD_ACCOUNT_COLUMN_RETRY_ON_SERVER_CERT Retry on Untrusted Server Certificate
|
||||
CMD_TUNDownOnDisconnectEnable Enable the Turn TUN Interface Down on Client Disconnect Function.
|
||||
CMD_TUNDownOnDisconnectEnable_Help This allows you to enable Turn TUN Interface Down on Client Disconnect Function.
|
||||
CMD_TUNDownOnDisconnectEnable_Args TUNDownOnDisconnectEnable
|
||||
CMD_TUNDownOnDisconnectDisable Disable the Turn TUN Interface Down on Client Disconnect Function.
|
||||
CMD_TUNDownOnDisconnectDisable_Help This allows you to disable Turn TUN Interface Down on Client Disconnect Function.
|
||||
CMD_TUNDownOnDisconnectDisable_Args TUNDownOnDisconnectDisable
|
||||
CMD_TUNDownOnDisconnectGet Get status of the Turn TUN Interface Down on Client Disconnect Function.
|
||||
CMD_TUNDownOnDisconnectGet_Help This allows you to get status of the Turn TUN Interface Down on Client Disconnect Function.
|
||||
CMD_TUNDownOnDisconnectGet_Args TUNDownOnDisconnectGet
|
||||
CMD_TUNDownOnDisconnectGet_COLUMN1 Put TUN down on disconnect
|
||||
CMD_AccountRetryOnServerCertEnable Enable VPN connection retry if server certificate is invalid
|
||||
CMD_AccountRetryOnServerCertEnable_Help When a VPN Connection Setting registered on the VPN Client is specified and that VPN Connection Setting connects to a VPN Server, use this to enable the option to retry connection if Server certificate cannot be trusted.
|
||||
CMD_AccountRetryOnServerCertEnable_Args AccountRetryOnServerCertEnable [name]
|
||||
CMD_AccountRetryOnServerCertEnable_[name] Specify the name of the VPN Connection Setting whose setting you want to change.
|
||||
CMD_AccountRetryOnServerCertDisable Enable VPN connection retry if server certificate is invalid
|
||||
CMD_AccountRetryOnServerCertDisable_Help When a VPN Connection Setting registered on the VPN Client is specified and that VPN Connection Setting connects to a VPN Server, use this to disable the option to retry connection if Server certificate cannot be trusted.
|
||||
CMD_AccountRetryOnServerCertDisable_Args AccountRetryOnServerCertEnable [name]
|
||||
CMD_AccountRetryOnServerCertDisable_[name] Specify the name of the VPN Connection Setting whose setting you want to change.
|
||||
|
||||
Loading…
Reference in New Issue
Block a user