diff --git a/src/Cedar/Command.c b/src/Cedar/Command.c
index d033339a..490a1d5d 100644
--- a/src/Cedar/Command.c
+++ b/src/Cedar/Command.c
@@ -7505,6 +7505,8 @@ void PsMain(PS *ps)
 			{"ListenerList", PsListenerList},
 			{"ListenerEnable", PsListenerEnable},
 			{"ListenerDisable", PsListenerDisable},
+			{"PortsUDPGet", PsPortsUDPGet},
+			{"PortsUDPSet", PsPortsUDPSet},
 			{"ServerPasswordSet", PsServerPasswordSet},
 			{"ClusterSettingGet", PsClusterSettingGet},
 			{"ClusterSettingStandalone", PsClusterSettingStandalone},
@@ -22888,6 +22890,111 @@ UINT PsListenerEnable(CONSOLE *c, char *cmd_name, wchar_t *str, void *param)
 	return 0;
 }
 
+// Set UDP ports the server should listen on
+UINT PsPortsUDPSet(CONSOLE *c, char *cmd_name, wchar_t *str, void *param)
+{
+	LIST *o, *ports;
+	PS *ps = (PS *)param;
+	UINT ret;
+	RPC_PORTS t;
+	PARAM args[] =
+	{
+		{"[ports]", CmdPrompt, _UU("CMD_PortsUDPSet_[ports]"), CmdEvalPortList, (void *)false}
+	};
+
+	o = ParseCommandList(c, cmd_name, str, args, sizeof(args) / sizeof(args[0]));
+	if (o == NULL)
+	{
+		return ERR_INVALID_PARAMETER;
+	}
+
+	ports = StrToPortList(GetParamStr(o, "[ports]"), false);
+
+	FreeParamValueList(o);
+
+	t.Num = LIST_NUM(ports);
+	if (t.Num > 0)
+	{
+		UINT i;
+		t.Ports = Malloc(sizeof(UINT) * t.Num);
+
+		for (i = 0; i < t.Num; ++i)
+		{
+			t.Ports[i] = (UINT)LIST_DATA(ports, i);
+		}
+	}
+	else
+	{
+		t.Ports = NULL;
+	}
+
+	ReleaseList(ports);
+
+	ret = ScSetPortsUDP(ps->Rpc, &t);
+	if (ret != ERR_NO_ERROR)
+	{
+		CmdPrintError(c, ret);
+	}
+
+	Free(t.Ports);
+
+	return ret;
+}
+
+// List UDP ports the server is listening on
+UINT PsPortsUDPGet(CONSOLE *c, char *cmd_name, wchar_t *str, void *param)
+{
+	LIST *o;
+	PS *ps = (PS *)param;
+	UINT ret;
+	RPC_PORTS t;
+
+	o = ParseCommandList(c, cmd_name, str, NULL, 0);
+	if (o == NULL)
+	{
+		return ERR_INVALID_PARAMETER;
+	}
+
+	FreeParamValueList(o);
+
+	Zero(&t, sizeof(t));
+
+	ret = ScGetPortsUDP(ps->Rpc, &t);
+	if (ret == ERR_NO_ERROR)
+	{
+		wchar_t str[MAX_SIZE];
+		CT *ct = CtNewStandard();
+
+		Zero(str, sizeof(str));
+
+		if (t.Num > 0)
+		{
+			UINT i;
+			wchar_t buf[MAX_SIZE];
+
+			UniFormat(buf, sizeof(buf), L"%u", t.Ports[0]);
+			UniStrCat(str, sizeof(str), buf);
+
+			for (i = 1; i < t.Num; ++i)
+			{
+				UniFormat(buf, sizeof(buf), L", %u", t.Ports[i]);
+				UniStrCat(str, sizeof(str), buf);
+			}
+		}
+
+		CtInsert(ct, _UU("CMD_PortsUDPGet_Ports"), str);
+		CtFree(ct, c);
+	}
+	else
+	{
+		CmdPrintError(c, ret);
+	}
+
+	FreeRpcPorts(&t);
+
+	return ret;
+}
+
 // Draw a row of console table
 void CtPrintRow(CONSOLE *c, UINT num, UINT *widths, wchar_t **strings, bool *rights, char separate_char)
 {
diff --git a/src/Cedar/Command.h b/src/Cedar/Command.h
index 55a71718..a0deaebc 100644
--- a/src/Cedar/Command.h
+++ b/src/Cedar/Command.h
@@ -398,6 +398,8 @@ UINT PsListenerDelete(CONSOLE *c, char *cmd_name, wchar_t *str, void *param);
 UINT PsListenerList(CONSOLE *c, char *cmd_name, wchar_t *str, void *param);
 UINT PsListenerEnable(CONSOLE *c, char *cmd_name, wchar_t *str, void *param);
 UINT PsListenerDisable(CONSOLE *c, char *cmd_name, wchar_t *str, void *param);
+UINT PsPortsUDPSet(CONSOLE *c, char *cmd_name, wchar_t *str, void *param);
+UINT PsPortsUDPGet(CONSOLE *c, char *cmd_name, wchar_t *str, void *param);
 UINT PsServerPasswordSet(CONSOLE *c, char *cmd_name, wchar_t *str, void *param);
 UINT PsClusterSettingGet(CONSOLE *c, char *cmd_name, wchar_t *str, void *param);
 UINT PsClusterSettingStandalone(CONSOLE *c, char *cmd_name, wchar_t *str, void *param);
diff --git a/src/bin/hamcore/strtable_cn.stb b/src/bin/hamcore/strtable_cn.stb
index fec68e3a..7fc24942 100644
--- a/src/bin/hamcore/strtable_cn.stb
+++ b/src/bin/hamcore/strtable_cn.stb
@@ -4567,6 +4567,20 @@ CMD_ListenerDisable_[port]		使用一个整数，指定要停止的 TCP/IP 监
 CMD_ListenerDisable_PortPrompt	启动 TCP/IP 监听器端口号: 
 
 
+# PortsUDPSet command
+CMD_PortsUDPSet			Sets the UDP ports that the server should listen on
+CMD_PortsUDPSet_Help	This command can be used to specify a single or multiple UDP ports the server should listen on. \nYou can specify a port that is used by another process, however the server will not be able to use it until the port becomes free. \nSpecify a port number that is within the range of 1 to 65535. \nYou can list the ports that are currently set with the PortsUDPGet command. \nTo execute this command, you must have VPN Server administrator privileges.
+CMD_PortsUDPSet_Args	PortsUDPSet [ports]
+CMD_PortsUDPSet_[ports]	Multiple UDP ports can be specified by splitting them with a space or a comma, for example: "443, 992, 1194, 5555". \nSpecify "0" to disable the UDP listener. \n\nPorts: 
+
+
+# PortsUDPGet command
+CMD_PortsUDPGet			Lists the UDP ports that the server is listening on
+CMD_PortsUDPGet_Help	This command can be used to retrieve the UDP ports the server is listening on. \nYou can set the ports with the PortsUDPSet command.
+CMD_PortsUDPGet_Args	PortsUDPGet
+CMD_PortsUDPGet_Ports	UDP ports
+
+
 # ServerPasswordSet 命令
 CMD_ServerPasswordSet				设置 VPN Server 管理员密码
 CMD_ServerPasswordSet_Help			这将设置 VPN Server 管理员密码。您可以指定密码为一个参数。如果密码没有指定，将显示提示输入密码和密码确认。如果指定密码为一个参数，这个密码将在屏幕上显示瞬间，这构成了风险。我们建议尽可能避免指定这个参数，使用密码提示输入密码。\n为了执行这个命令，您必须有 VPN Server 管理员权限。
diff --git a/src/bin/hamcore/strtable_en.stb b/src/bin/hamcore/strtable_en.stb
index 2edc6d7b..2e19c4e7 100644
--- a/src/bin/hamcore/strtable_en.stb
+++ b/src/bin/hamcore/strtable_en.stb
@@ -4549,6 +4549,20 @@ CMD_ListenerDisable_[port]	Using an integer, specify the port number of the TCP/
 CMD_ListenerDisable_PortPrompt	Port number of TCP/IP Listener to start: 
 
 
+# PortsUDPSet command
+CMD_PortsUDPSet			Sets the UDP ports that the server should listen on
+CMD_PortsUDPSet_Help	This command can be used to specify a single or multiple UDP ports the server should listen on. \nYou can specify a port that is used by another process, however the server will not be able to use it until the port becomes free. \nSpecify a port number that is within the range of 1 to 65535. \nYou can list the ports that are currently set with the PortsUDPGet command. \nTo execute this command, you must have VPN Server administrator privileges.
+CMD_PortsUDPSet_Args	PortsUDPSet [ports]
+CMD_PortsUDPSet_[ports]	Multiple UDP ports can be specified by splitting them with a space or a comma, for example: "443, 992, 1194, 5555". \nSpecify "0" to disable the UDP listener. \n\nPorts: 
+
+
+# PortsUDPGet command
+CMD_PortsUDPGet			Lists the UDP ports that the server is listening on
+CMD_PortsUDPGet_Help	This command can be used to retrieve the UDP ports the server is listening on. \nYou can set the ports with the PortsUDPSet command.
+CMD_PortsUDPGet_Args	PortsUDPGet
+CMD_PortsUDPGet_Ports	UDP ports
+
+
 # ServerPasswordSet command
 CMD_ServerPasswordSet	Set VPN Server Administrator Password
 CMD_ServerPasswordSet_Help	This sets the VPN Server administrator password. You can specify the password as a parameter. If the password is not specified, a prompt will be displayed to input the password and password confirmation. If you include the password as a parameter, this password will be displayed momentarily on the screen, which poses a risk. We recommend that whenever possible, avoid specifying this parameter and input the password using the password prompt. \nTo execute this command, you must have VPN Server administrator privileges.
diff --git a/src/bin/hamcore/strtable_ja.stb b/src/bin/hamcore/strtable_ja.stb
index fd78c9e7..df5005f5 100644
--- a/src/bin/hamcore/strtable_ja.stb
+++ b/src/bin/hamcore/strtable_ja.stb
@@ -4552,6 +4552,20 @@ CMD_ListenerDisable_[port]	停止する TCP/IP リスナーのポート番号を
 CMD_ListenerDisable_PortPrompt	開始する TCP/IP リスナーのポート番号: 
 
 
+# PortsUDPSet command
+CMD_PortsUDPSet			サーバーが着信を受付ける UDP ポート番号の一覧を設定します。
+CMD_PortsUDPSet_Help	このコマンドを使用すると、このサーバーが着信を受付ける単一または複数の UDP ポートの一覧を設定することができます。\n他のプロセスによって使用されている UDP ポートを設定することも可能ですが、そのポートが解放されるまでは機能しません。\nポート番号は、1 から 65535 の間で指定します。\n現在設定されているポートの一覧は、PortsUDPGet コマンドを使用して確認することができます。\nこのコマンドを実行するには、VPN Server の管理者権限が必要です。
+CMD_PortsUDPSet_Args	PortsUDPSet [ports]
+CMD_PortsUDPSet_[ports]	複数のポート番号を指定する場合は、スペース文字またはカンマ文字で区切ってください。例: "443, 992, 1194, 5555". \n"0" を指定すると、UDP リスナーを無効化することができます。\n\nポート一覧: 
+
+
+# PortsUDPGet command
+CMD_PortsUDPGet			サーバーにおける着信 UDP ポートの一覧を表示します。
+CMD_PortsUDPGet_Help	このコマンドを使用すると、サーバーで待受け状態になっている UDP ポートの一覧を表示することができます。\nポートの設定を変更するには、PortsUDPSet コマンドを使用してください。
+CMD_PortsUDPGet_Args	PortsUDPGet
+CMD_PortsUDPGet_Ports	UDP ポート一覧
+
+
 # ServerPasswordSet コマンド
 CMD_ServerPasswordSet	VPN Server の管理者パスワードの設定
 CMD_ServerPasswordSet_Help	VPN Server の管理者パスワードを設定します。パラメータとしてパスワードを指定することができます。パラメータを指定しない場合は、パスワードと、その確認入力を行なうためのプロンプトが表示されます。パスワードをパラメータに与えた場合、そのパスワードが一時的に画面に表示されるため危険です。できる限り、パラメータを指定せずに、パスワードプロンプトを用いてパスワードを入力することを推奨します。\nこのコマンドを実行するには、VPN Server の管理者権限が必要です。
diff --git a/src/bin/hamcore/strtable_ko.stb b/src/bin/hamcore/strtable_ko.stb
index a03384c8..2aa883b7 100644
--- a/src/bin/hamcore/strtable_ko.stb
+++ b/src/bin/hamcore/strtable_ko.stb
@@ -4530,6 +4530,20 @@ CMD_ListenerDisable_[port] 중지 TCP/IP 리스너의 포트 번호를 정수로
 CMD_ListenerDisable_PortPrompt 시작하는 TCP/IP 리스너 포트 번호:
 
 
+# PortsUDPSet command
+CMD_PortsUDPSet			Sets the UDP ports that the server should listen on
+CMD_PortsUDPSet_Help	This command can be used to specify a single or multiple UDP ports the server should listen on. \nYou can specify a port that is used by another process, however the server will not be able to use it until the port becomes free. \nSpecify a port number that is within the range of 1 to 65535. \nYou can list the ports that are currently set with the PortsUDPGet command. \nTo execute this command, you must have VPN Server administrator privileges.
+CMD_PortsUDPSet_Args	PortsUDPSet [ports]
+CMD_PortsUDPSet_[ports]	Multiple UDP ports can be specified by splitting them with a space or a comma, for example: "443, 992, 1194, 5555". \nSpecify "0" to disable the UDP listener. \n\nPorts: 
+
+
+# PortsUDPGet command
+CMD_PortsUDPGet			Lists the UDP ports that the server is listening on
+CMD_PortsUDPGet_Help	This command can be used to retrieve the UDP ports the server is listening on. \nYou can set the ports with the PortsUDPSet command.
+CMD_PortsUDPGet_Args	PortsUDPGet
+CMD_PortsUDPGet_Ports	UDP ports
+
+
 # ServerPasswordSet 명령
 CMD_ServerPasswordSet VPN Server 관리자 암호 설정
 CMD_ServerPasswordSet_Help VPN Server 관리자 암호를 설정합니다. 매개 변수로 암호를 지정 할 수 있습니다. 매개 변수를 지정하지 않으면, 패스워드와 그 확인 입력을위한 프롬프트가 표시됩니다. 비밀번호를 매개 변수로 주었을 경우, 암호가 일시적으로 화면에 표시되기 때문에 위험합니다. 가능한 매개 변수를 지정하지 않고 암호 프롬프트를 사용하여 암호를 입력 할 것을 권장합니다. \n이 명령을 실행하려면 VPN Server 관리자 권한이 있어야합니다.
diff --git a/src/bin/hamcore/strtable_pt_br.stb b/src/bin/hamcore/strtable_pt_br.stb
index adee21aa..0e3c35be 100644
--- a/src/bin/hamcore/strtable_pt_br.stb
+++ b/src/bin/hamcore/strtable_pt_br.stb
@@ -4271,6 +4271,20 @@ CMD_ListenerDisable_[port]	Using an integer, specify the port number of the TCP/
 CMD_ListenerDisable_PortPrompt	Port number of TCP/IP Listener to start: 
 
 
+# PortsUDPSet command
+CMD_PortsUDPSet			Sets the UDP ports that the server should listen on
+CMD_PortsUDPSet_Help	This command can be used to specify a single or multiple UDP ports the server should listen on. \nYou can specify a port that is used by another process, however the server will not be able to use it until the port becomes free. \nSpecify a port number that is within the range of 1 to 65535. \nYou can list the ports that are currently set with the PortsUDPGet command. \nTo execute this command, you must have VPN Server administrator privileges.
+CMD_PortsUDPSet_Args	PortsUDPSet [ports]
+CMD_PortsUDPSet_[ports]	Multiple UDP ports can be specified by splitting them with a space or a comma, for example: "443, 992, 1194, 5555". \nSpecify "0" to disable the UDP listener. \n\nPorts: 
+
+
+# PortsUDPGet command
+CMD_PortsUDPGet			Lists the UDP ports that the server is listening on
+CMD_PortsUDPGet_Help	This command can be used to retrieve the UDP ports the server is listening on. \nYou can set the ports with the PortsUDPSet command.
+CMD_PortsUDPGet_Args	PortsUDPGet
+CMD_PortsUDPGet_Ports	UDP ports
+
+
 # ServerPasswordSet command
 CMD_ServerPasswordSet	Set VPN Server Administrator Password
 CMD_ServerPasswordSet_Help	This sets the VPN Server administrator password. You can specify the password as a parameter. If the password is not specified, a prompt will be displayed to input the password and password confirmation. If you include the password as a parameter, this password will be displayed momentarily on the screen, which poses a risk. We recommend that whenever possible, avoid specifying this parameter and input the password using the password prompt. \nTo execute this command, you must have VPN Server administrator privileges.
diff --git a/src/bin/hamcore/strtable_ru.stb b/src/bin/hamcore/strtable_ru.stb
index f493829b..b66382f3 100644
--- a/src/bin/hamcore/strtable_ru.stb
+++ b/src/bin/hamcore/strtable_ru.stb
@@ -4549,6 +4549,20 @@ CMD_ListenerDisable_[port]	Using an integer, specify the port number of the TCP/
 CMD_ListenerDisable_PortPrompt	Port number of TCP/IP Listener to start: 
 
 
+# PortsUDPSet command
+CMD_PortsUDPSet			Sets the UDP ports that the server should listen on
+CMD_PortsUDPSet_Help	This command can be used to specify a single or multiple UDP ports the server should listen on. \nYou can specify a port that is used by another process, however the server will not be able to use it until the port becomes free. \nSpecify a port number that is within the range of 1 to 65535. \nYou can list the ports that are currently set with the PortsUDPGet command. \nTo execute this command, you must have VPN Server administrator privileges.
+CMD_PortsUDPSet_Args	PortsUDPSet [ports]
+CMD_PortsUDPSet_[ports]	Multiple UDP ports can be specified by splitting them with a space or a comma, for example: "443, 992, 1194, 5555". \nSpecify "0" to disable the UDP listener. \n\nPorts: 
+
+
+# PortsUDPGet command
+CMD_PortsUDPGet			Lists the UDP ports that the server is listening on
+CMD_PortsUDPGet_Help	This command can be used to retrieve the UDP ports the server is listening on. \nYou can set the ports with the PortsUDPSet command.
+CMD_PortsUDPGet_Args	PortsUDPGet
+CMD_PortsUDPGet_Ports	UDP ports
+
+
 # ServerPasswordSet command
 CMD_ServerPasswordSet	Set VPN Server Administrator Password
 CMD_ServerPasswordSet_Help	This sets the VPN Server administrator password. You can specify the password as a parameter. If the password is not specified, a prompt will be displayed to input the password and password confirmation. If you include the password as a parameter, this password will be displayed momentarily on the screen, which poses a risk. We recommend that whenever possible, avoid specifying this parameter and input the password using the password prompt. \nTo execute this command, you must have VPN Server administrator privileges.
diff --git a/src/bin/hamcore/strtable_tw.stb b/src/bin/hamcore/strtable_tw.stb
index 74a5f72f..5e32ed27 100644
--- a/src/bin/hamcore/strtable_tw.stb
+++ b/src/bin/hamcore/strtable_tw.stb
@@ -4568,6 +4568,20 @@ CMD_ListenerDisable_[port]	使用一個整數，指定要停止的 TCP/IP 監聽
 CMD_ListenerDisable_PortPrompt	啟動 TCP/IP 監聽器埠號: 
 
 
+# PortsUDPSet command
+CMD_PortsUDPSet			Sets the UDP ports that the server should listen on
+CMD_PortsUDPSet_Help	This command can be used to specify a single or multiple UDP ports the server should listen on. \nYou can specify a port that is used by another process, however the server will not be able to use it until the port becomes free. \nSpecify a port number that is within the range of 1 to 65535. \nYou can list the ports that are currently set with the PortsUDPGet command. \nTo execute this command, you must have VPN Server administrator privileges.
+CMD_PortsUDPSet_Args	PortsUDPSet [ports]
+CMD_PortsUDPSet_[ports]	Multiple UDP ports can be specified by splitting them with a space or a comma, for example: "443, 992, 1194, 5555". \nSpecify "0" to disable the UDP listener. \n\nPorts: 
+
+
+# PortsUDPGet command
+CMD_PortsUDPGet			Lists the UDP ports that the server is listening on
+CMD_PortsUDPGet_Help	This command can be used to retrieve the UDP ports the server is listening on. \nYou can set the ports with the PortsUDPSet command.
+CMD_PortsUDPGet_Args	PortsUDPGet
+CMD_PortsUDPGet_Ports	UDP ports
+
+
 # ServerPasswordSet 命令
 CMD_ServerPasswordSet	設置 VPN Server 管理員密碼
 CMD_ServerPasswordSet_Help	這將設置 VPN Server 管理員密碼。您可以指定密碼為一個參數。如果密碼沒有指定，將顯示提示輸入密碼和密碼確認。如果指定密碼為一個參數，這個密碼將在螢幕上顯示瞬間，這構成了風險。我們建議盡可能避免指定這個參數，使用密碼提示輸入密碼。\n為了執行這個命令，您必須有 VPN Server 管理員許可權。