From 8402dde834b669022bfe5e2a6e773ba74caca46b Mon Sep 17 00:00:00 2001 From: FelipeL Date: Mon, 7 Oct 2019 02:05:39 -0300 Subject: [PATCH] Update strtable_pt_br.stb --- src/bin/hamcore/strtable_pt_br.stb | 1005 ++++++++++++++-------------- 1 file changed, 502 insertions(+), 503 deletions(-) diff --git a/src/bin/hamcore/strtable_pt_br.stb b/src/bin/hamcore/strtable_pt_br.stb index e5796868..f4f06fe6 100644 --- a/src/bin/hamcore/strtable_pt_br.stb +++ b/src/bin/hamcore/strtable_pt_br.stb @@ -1,4 +1,3 @@ -"# Copyright (c) all contributors on SoftEther VPN project in GitHub. # SoftEther VPN String Table # Copyright (c) all contributors on SoftEther VPN project in GitHub. # Copyright (c) Daiyuu Nobori, SoftEther Project at University of Tsukuba, and SoftEther Corporation. @@ -22,8 +21,8 @@ DEFAULT_FONT_SIZE 8 DEFAULT_LOCALE - - $ : : $ Dom Seg Ter Qua Qui Sex Sáb : : : $ (Nenhum) -# 言語 -# (0: 日本語, 1: 英語) +# ?? +# (0: ???, 1: ??) LANG 6 LANGSTR Portuguese-Brazil @@ -31,7 +30,7 @@ STRTABLE_ID SE_VPN_20121007 # Strings for Japanese version only (not required for other language versions.) -CM_JAPANESE_ONLY_OLD_STARTUP %s\\SoftEther VPN Client 2.0 タスクトレイ.lnk +CM_JAPANESE_ONLY_OLD_STARTUP %s\\SoftEther VPN Client 2.0 ??????.lnk # Software information @@ -195,7 +194,7 @@ ERR_117 The command or file name is incorrect. ERR_118 The license key is incorrect. ERR_119 No valid product license is registered on the VPN Server. Contact the VPN Server's administrator. ERR_120 The product license required for the VPN Server to operate as a cluster is not registered. Contact the VPN Server's administrator. -ERR_121 This VPN Connection Setting has been installed using the ""Web Installer Creation Kit"" or ""Simple Installer Creation Kit"". The destination server is not an edition that supports the SoftEther VPN 2.0 Administration Pack. Contact the system administrator or person who created the installer. +ERR_121 This VPN Connection Setting has been installed using the "Web Installer Creation Kit" or "Simple Installer Creation Kit". The destination server is not an edition that supports the SoftEther VPN 2.0 Administration Pack. Contact the system administrator or person who created the installer. ERR_122 With the VPN Server SDK for .NET, it is only possible to connect to the SoftEther VPN Server edition that supports the SoftEther VPN 2.0 Administration Pack. The destination VPN Server is not an edition that supports the SoftEther VPN 2.0 Administration Pack. Contact the system administrator. ERR_123 Beta Version Software on the destination server is expired. Contact to system administrator of the server to download a new beta version or full version from http://selinks.org/. ERR_124 The VPN connection to VPN Server is refused at server side. @@ -205,7 +204,7 @@ ERR_127 The VPN Server requires the special-version VPN Client software. Consult ERR_128 The number of registered user objects exceeds the maximum number which is allowed the product license applied on the VPN Server. You cannot add user objects anymore unless you delete old one, or upgrade the edition of the product. ERR_129 The subscription contract has already expired before the release-date of this version of VPN Server. The customer has been authorized to use VPN Server's builds only in the period of the subscription contract. The customer has to extend the period of the subscription. The customer also be able to 'downgrade' the version of VPN Server to older version which has released before the end of the subscription. If you want to downgrade the version, older versions might be available on http://selinks.org/. ERR_130 We are afraid that the trial license keys cannot be obtained frequently by the same customer. Please consider to purchase the product version. -ERR_131 Several VPN Servers on the same IP address. You can specify the destination server's private IP or hostname concretely such as ""Global IP address or host name/192.168.x.x"". Or if a NAT is used on the server's side, configure the NAT to open, relay or transfer appropriate ports. +ERR_131 Several VPN Servers on the same IP address. You can specify the destination server's private IP or hostname concretely such as "Global IP address or host name/192.168.x.x". Or if a NAT is used on the server's side, configure the NAT to open, relay or transfer appropriate ports. ERR_132 The key for Dynamic DNS Service duplicates to others. The key will be reset automatically. ERR_133 The specified Dynamic DNS hostname is already used. Please change the hostname. ERR_134 The specified Dynamic DNS hostname has an invalid characters. Please change the hostname. @@ -248,7 +247,7 @@ TCPOPT_NOT_ADMIN Users without administrator privileges cannot use the TCP Optim VISTA_MMCSS_MSG Do you wish to optimize Windows Vista / Windows 7 / Windows 8 / Windows 10 for playing multimedia files with VPN? (e.g. videos, audios and streaming) VISTA_MMCSS_MSG_2 Optimization for Windows Vista / Windows 7 / Windows 8 / Windows 10 with VPN has already done.\r\nDo you wish to remove optimized configuration? VISTA_MMCSS_MSG_3 You cannot use optimization in currently environment. -VISTA_MMCSS_MSG_4 You must have administrator privileges for this function.\r\nPlease note that in Windows Vista / Windows 7 / Windows 8 / Windows 10 you should use ""Run as Administrators"" to execute program. +VISTA_MMCSS_MSG_4 You must have administrator privileges for this function.\r\nPlease note that in Windows Vista / Windows 7 / Windows 8 / Windows 10 you should use "Run as Administrators" to execute program. VISTA_MMCSS_MSG_5 Optimization is finished. VISTA_MMCSS_MSG_6 Optimization configuration is removed. @@ -278,12 +277,12 @@ DLG_OPEN_KEY Select the Private Key File DLG_OPEN_KEY_WITH_CERT Select the Corresponding Private Key file DLG_OPEN_FILE_ERROR Unable to read the specified file: %S. DLG_OPEN_FILE_ERROR_W Unable to read the specified file: %s. -DLG_BAD_P12 The file ""%S"" is not a valid PKCS#12 certificate file. -DLG_BAD_P12_W The file ""%s"" is not a valid PKCS#12 certificate file. -DLG_BAD_X509 The file ""%S"" is not a valid X509 certificate file. -DLG_BAD_X509_W The file ""%s"" is not a valid X509 certificate file. -DLG_BAD_KEY The file ""%S"" is not a valid RSA private key file. -DLG_BAD_KEY_W The file ""%s"" is not a valid RSA private key file. +DLG_BAD_P12 The file "%S" is not a valid PKCS#12 certificate file. +DLG_BAD_P12_W The file "%s" is not a valid PKCS#12 certificate file. +DLG_BAD_X509 The file "%S" is not a valid X509 certificate file. +DLG_BAD_X509_W The file "%s" is not a valid X509 certificate file. +DLG_BAD_KEY The file "%S" is not a valid RSA private key file. +DLG_BAD_KEY_W The file "%s" is not a valid RSA private key file. DLG_BAD_SIGNATURE The private key does not correctly correspond with the public key contained in the specified certificate. \r\nA private key that corresponds to the certificate public key is required. DLG_SAVE_CERT Specify a file name where you want to save the certificate DLG_SAVE_KEY Specify a file name where you want to save the private key @@ -311,7 +310,7 @@ DLG_UPDATE_HINT Press OK to view the information of the latest update on the web # Concerning competing processes BAD_PROCESS_TITLE Warning concerning %S -BAD_PROCESS_MESSAGE It is possible that the software ""%S"" is running on this computer, which could cause problems. \r\n\r\nThere is a possibility that problems in ""%S"" will cause instability in VPN communication and errors. \r\n\r\nIf, by using VPN together with the software ""%S"" VPN becomes unstable, either stop or uninstall ""%S"". (Note that in some cases, because of the nature of the software, there are cases that the problems will still remain on the computer where even if you stop the software.) \r\n +BAD_PROCESS_MESSAGE It is possible that the software "%S" is running on this computer, which could cause problems. \r\n\r\nThere is a possibility that problems in "%S" will cause instability in VPN communication and errors. \r\n\r\nIf, by using VPN together with the software "%S" VPN becomes unstable, either stop or uninstall "%S". (Note that in some cases, because of the nature of the software, there are cases that the problems will still remain on the computer where even if you stop the software.) \r\n # Concerning hardware tokens @@ -377,7 +376,7 @@ SEC_NEW_CERT_IMPORT_OK The newly created certificate has been written to the sma SEC_CURRENT_DEVICE Currently the device %S is selected. SEC_CURRENT_NO_DEVICE Select which smart card device to use. SEC_NO_SECURE_DEVICE A SoftEther VPN-compatible smart card or hardware security token device is not installed on the system. \r\n\r\nTo use a smart card or hardware token using SoftEther VPN it is necessary to install a PKCS#11-compatible device driver on Windows. In addition, it is necessary that SoftEther VPN supports the device type. \r\n\r\nMake sure a system-compatible device driver has been installed. \r\nRefer to the SoftEther VPN Project website for the list of SoftEther VPN-compatible devices. Also, it may be possible to increase the compatible devices by updating to the most recent software version. -SEC_PIN_DEVICE_OPEN_ERR Unable to connect the device ""%S"". Make sure the hardware is correctly connected. +SEC_PIN_DEVICE_OPEN_ERR Unable to connect the device "%S". Make sure the hardware is correctly connected. SEC_PIN_CURRENT_BAD Current PIN code is incorrect. SEC_PIN_CHANGE_FAILED Changing of PIN code failed. SEC_PIN_OK The PIN code has been changed. @@ -385,7 +384,7 @@ SEC_PIN_OK The PIN code has been changed. # TCP Connection Dialog CONNECTDLG_CAPTION Conectando -CONNECTDLG_MESSAGE Connecting to the server ""%S"" (TCP port: %u)... +CONNECTDLG_MESSAGE Connecting to the server "%S" (TCP port: %u)... CONNECTDLG_CANCELING Aborting the connection. Please wait... @@ -413,9 +412,9 @@ PW_TYPE_PROXY Proxy Server Authentication # Concerning VPN connection status STATUS_1 Inicializando... -STATUS_2 Connecting to VPN Server ""%S"" via Proxy Server %S... +STATUS_2 Connecting to VPN Server "%S" via Proxy Server %S... STATUS_3 Authenticating User on Proxy Server %S... -STATUS_4 Connecting to VPN Server ""%S""... +STATUS_4 Connecting to VPN Server "%S"... STATUS_5 Verifying Server Certificate... STATUS_6 Authenticating User... STATUS_7 Establishing VPN Session... @@ -448,7 +447,7 @@ CC_WARNING_MSG Do you want the certificate of the VPN Server you are currently c # Errors about Windows Versions WINVER_TITLE Warning about Windows versions -WINVER_ERROR_FORMAT The version and Service Pack of Windows on %s is ""%S"".\r\n\r\nThe latest supported version and Service Pack of Windows by %s is as follows:\r\n%S\r\nBecause of the version of Windows on %s is newer than the version of Windows which %s supports, unexpected troubles or compatible issues might occur.\r\nIn order to avoid problems, we will recommend you to obtain and install the latest update of %s.\r\n(It is possible to continue using the current version without updates although that is not what we recommend.)\r\n\r\nIf you are the administrator, you can download the latest update-patch of %s from the web site http://selinks.org/?se for free.\r\n\r\nIf you are not the administrator you should notify the VPN Server's administrator of this message.\r\n\r\n----- MSG%04u%02u -----\r\n\r\n +WINVER_ERROR_FORMAT The version and Service Pack of Windows on %s is "%S".\r\n\r\nThe latest supported version and Service Pack of Windows by %s is as follows:\r\n%S\r\nBecause of the version of Windows on %s is newer than the version of Windows which %s supports, unexpected troubles or compatible issues might occur.\r\nIn order to avoid problems, we will recommend you to obtain and install the latest update of %s.\r\n(It is possible to continue using the current version without updates although that is not what we recommend.)\r\n\r\nIf you are the administrator, you can download the latest update-patch of %s from the web site http://selinks.org/?se for free.\r\n\r\nIf you are not the administrator you should notify the VPN Server's administrator of this message.\r\n\r\n----- MSG%04u%02u -----\r\n\r\n WINVER_ERROR_VPNSERVER the VPN Server on the destination computer WINVER_ERROR_VPNBRIDGE the VPN Bridge on the destination computer WINVER_ERROR_VPNCLIENT the VPN Client on this local computer @@ -458,8 +457,8 @@ WINVER_ERROR_PC_REMOTE the remote server # Warning for Open-source Version OSS_MSG Welcome to the SoftEther VPN Server Academic Version!\r\n\r\n\r\nThis VPN Server is open-source free software developed as academic research at University of Tsukuba, Japan, and distributed from the SoftEther VPN Project (http://www.softether.org/), for free of charge for the public interests.\r\n\r\nSoftEther VPN software is distributed to public as a part of the joint-research contract between University of Tsukuba and SoftEther VPN Project. SoftEther VPN software is developed and published for JUST AN ACADEMIC RESEARCH PURPOSE. Therefore no support service are provided about SoftEther VPN software even if it contains bugs or vulnerabilities. A user will be liable for the result of use SoftEther VPN. The developers and publishers of SoftEther VPN will never be liable for either any consequences or damages.\r\n\r\nEnjoy using VPN with SoftEther VPN Server.\r\n\r\nFor more details of SoftEther VPN, visit http://www.softether.org/.\r\n\r\n -NATT_MSG ** Connected with NAT traversal - might be unstable **\r\n\r\nThis VPN Client is connected to the VPN Server '%S' by using the NAT Traversal (UDP Hole Punching) technology.\r\n\r\nNAT Traversal allows the VPN Server behind the NAT-box to accept VPN connections from VPN Client without any port-forwarding setting on the NAT-box.\r\n\r\nHowever, NAT Traversal-based VPN sessions sometimes become unstable, because NAT Traversal uses UDP-based protocol. For example, the VPN tunnel disconnects every 5 minutes if there is a poor NAT-box between the VPN Server and the VPN Client. Some large-scale NAT gateways in cheap ISPs sometimes cause the same problem on NAT Traversal. This is a problem of routers or ISPs. This is not a problem of SoftEther VPN software.\r\n\r\nTo solve the unstable tunnel problem, you should connect to the VPN Server's TCP listener port directly, instead of using NAT Traversal. To connect to the VPN Server directly by using TCP, a listener port of the VPN Server must be exposed to the Internet by a port-forward setting on the NAT-box. Ask the administrator of the NAT-box, or refer to the manual of the NAT-box to add a port-forwarding setting on the NAT-box.\r\n\r\nIf this message still remains despite the VPN Server is exposing a TCP port to the Internet, check the ""Disable NAT-T"" checkbox on the VPN Client connection setting screen.\r\n\r\n -NATT_MSG2 ** Connected with NAT traversal - might be unstable **\r\n\r\nThis VPN Client is connected to the VPN Server '%S' by using the NAT Traversal (UDP Hole Punching) technology.\r\n\r\nNAT Traversal allows the VPN Server behind the NAT-box to accept VPN connections from VPN Client without any port-forwarding setting on the NAT-box.\r\n\r\nHowever, NAT Traversal-based VPN sessions sometimes become unstable, because NAT Traversal uses UDP-based protocol. For example, the VPN tunnel disconnects every 5 minutes if there is a poor NAT-box between the VPN Server and the VPN Client. Some large-scale NAT gateways in cheap ISPs sometimes cause the same problem on NAT Traversal. This is a problem of routers or ISPs. This is not a problem of SoftEther VPN software.\r\n\r\nTo solve the unstable tunnel problem, you should connect to the VPN Server's TCP listener port directly, instead of using NAT Traversal. To connect to the VPN Server directly by using TCP, a listener port of the VPN Server must be exposed to the Internet by a port-forward setting on the NAT-box. Ask the administrator of the NAT-box, or refer to the manual of the NAT-box to add a port-forwarding setting on the NAT-box.\r\n\r\nIf this message still remains despite the VPN Server is exposing a TCP port to the Internet, check the ""Disable NAT-T"" checkbox on the VPN Client connection setting screen after upgrading the VPN Client to Build 9428 or later.\r\n\r\n +NATT_MSG ** Connected with NAT traversal - might be unstable **\r\n\r\nThis VPN Client is connected to the VPN Server '%S' by using the NAT Traversal (UDP Hole Punching) technology.\r\n\r\nNAT Traversal allows the VPN Server behind the NAT-box to accept VPN connections from VPN Client without any port-forwarding setting on the NAT-box.\r\n\r\nHowever, NAT Traversal-based VPN sessions sometimes become unstable, because NAT Traversal uses UDP-based protocol. For example, the VPN tunnel disconnects every 5 minutes if there is a poor NAT-box between the VPN Server and the VPN Client. Some large-scale NAT gateways in cheap ISPs sometimes cause the same problem on NAT Traversal. This is a problem of routers or ISPs. This is not a problem of SoftEther VPN software.\r\n\r\nTo solve the unstable tunnel problem, you should connect to the VPN Server's TCP listener port directly, instead of using NAT Traversal. To connect to the VPN Server directly by using TCP, a listener port of the VPN Server must be exposed to the Internet by a port-forward setting on the NAT-box. Ask the administrator of the NAT-box, or refer to the manual of the NAT-box to add a port-forwarding setting on the NAT-box.\r\n\r\nIf this message still remains despite the VPN Server is exposing a TCP port to the Internet, check the "Disable NAT-T" checkbox on the VPN Client connection setting screen.\r\n\r\n +NATT_MSG2 ** Connected with NAT traversal - might be unstable **\r\n\r\nThis VPN Client is connected to the VPN Server '%S' by using the NAT Traversal (UDP Hole Punching) technology.\r\n\r\nNAT Traversal allows the VPN Server behind the NAT-box to accept VPN connections from VPN Client without any port-forwarding setting on the NAT-box.\r\n\r\nHowever, NAT Traversal-based VPN sessions sometimes become unstable, because NAT Traversal uses UDP-based protocol. For example, the VPN tunnel disconnects every 5 minutes if there is a poor NAT-box between the VPN Server and the VPN Client. Some large-scale NAT gateways in cheap ISPs sometimes cause the same problem on NAT Traversal. This is a problem of routers or ISPs. This is not a problem of SoftEther VPN software.\r\n\r\nTo solve the unstable tunnel problem, you should connect to the VPN Server's TCP listener port directly, instead of using NAT Traversal. To connect to the VPN Server directly by using TCP, a listener port of the VPN Server must be exposed to the Internet by a port-forward setting on the NAT-box. Ask the administrator of the NAT-box, or refer to the manual of the NAT-box to add a port-forwarding setting on the NAT-box.\r\n\r\nIf this message still remains despite the VPN Server is exposing a TCP port to the Internet, check the "Disable NAT-T" checkbox on the VPN Client connection setting screen after upgrading the VPN Client to Build 9428 or later.\r\n\r\n # Virtual HUB Admin Options @@ -476,8 +475,8 @@ HUB_AO_max_sessions_client_bridge_apply Only when this value is set to non-zero HUB_AO_max_sessions If you set this option to non-zero value, then the maximum number of VPN Sessions will be limited to this value. HUB_AO_max_sessions_client If you set this option to non-zero value, then the maximum number of VPN Client sessions will be limited to this value. No more VPN Client sessions will be allowed to establish. This option is valid only when the max_sessions_client_bridge_apply option is set to non-zero value. HUB_AO_max_sessions_bridge If you set this option to non-zero value, then the maximum number of VPN Bridge sessions will be limited to this value. No more VPN Bridge sessions will be allowed to establish. This option is valid only when the max_sessions_client_bridge_apply option is set to non-zero value. -HUB_AO_max_bitrates_download If you set this option to non-zero value, then all VPN Sessions on the Virtual Hub will be mandated to have a security policy setting which the ""Download Bandwidth"" value is set to this value. It will limit the downloading traffic speed of each VPN Session. For example, if this value is set to 1000000, then a downloading bandwidth of each VPN Session on the Virtual Hub will be limited to 1Mbps. -HUB_AO_max_bitrates_upload If you set this option to non-zero value, then all VPN Sessions on the Virtual Hub will be mandated to have a security policy setting which the ""Download Bandwidth"" value is set to this value. It will limit the uploading traffic speed of each VPN Session. For example, if this value is set to 1000000, then a uploading bandwidth of each VPN Session on the Virtual Hub will be limited to 1Mbps. +HUB_AO_max_bitrates_download If you set this option to non-zero value, then all VPN Sessions on the Virtual Hub will be mandated to have a security policy setting which the "Download Bandwidth" value is set to this value. It will limit the downloading traffic speed of each VPN Session. For example, if this value is set to 1000000, then a downloading bandwidth of each VPN Session on the Virtual Hub will be limited to 1Mbps. +HUB_AO_max_bitrates_upload If you set this option to non-zero value, then all VPN Sessions on the Virtual Hub will be mandated to have a security policy setting which the "Download Bandwidth" value is set to this value. It will limit the uploading traffic speed of each VPN Session. For example, if this value is set to 1000000, then a uploading bandwidth of each VPN Session on the Virtual Hub will be limited to 1Mbps. HUB_AO_deny_empty_password If you set this option to non-zero value, no user objects will be able to have an empty password. A user who has an empty password will be forbidden to connect a VPN Session. (Exception: a VPN connection from localhost will be permitted even if the password is empty.) HUB_AO_deny_bridge If you set this option to non-zero value, then any VPN Sessions in Bridge Mode will not be granted to establish, regardless of the setting of existing security policy of the user. No one will be able to connect to the Virtual Hub for bridging purpose. HUB_AO_deny_routing If you set this option to non-zero value, then any VPN Sessions in Routing Mode will not be granted to establish, regardless of the setting of existing security policy of the user. No one will be able to connect to the Virtual Hub for routing purpose. @@ -505,7 +504,7 @@ HUB_AO_no_change_cert_list If you set this option to non-zero value, then the ad HUB_AO_no_change_crl_list If you set this option to non-zero value, then the administrator of the Virtual HUB will be forbidden to modify the certificate revoked list of the Virtual Hub. HUB_AO_no_read_log_file If you set this option to non-zero value, then the administrator of the Virtual HUB will be forbidden to enumerate or download the log files of the Virtual Hub remotely. HUB_AO_no_change_msg If you set this option to non-zero value, then the administrator of the Virtual HUB will be forbidden to change the message which should be displayed when a VPN Client connects to the Virtual Hub. -HUB_AO_no_access_list_include_file If you set this option to non-zero value, then the administrator of the Virtual HUB will be forbidden to specify ""include:"" or ""exclude:"" instruction as a source or a destination user field on a access list entry of the Virtual Hub. +HUB_AO_no_access_list_include_file If you set this option to non-zero value, then the administrator of the Virtual HUB will be forbidden to specify "include:" or "exclude:" instruction as a source or a destination user field on a access list entry of the Virtual Hub. # Virtual Hub Extended Options @@ -523,7 +522,7 @@ HUB_AO_FilterIPv4 If you set this option to non-zero value, then the Virtual Hub HUB_AO_FilterIPv6 If you set this option to non-zero value, then the Virtual Hub discards all IPv6 packets. HUB_AO_FilterNonIP If you set this option to non-zero value, then the Virtual Hub discards all non-IP packets (non-IPv4, ARP or IPv6 packets). Incidentally, any tagged-VLAN packets via the Virtual Hub will be regarded as non-IP packets. HUB_AO_FilterBPDU If you set this option to non-zero value, then the Virtual Hub discards all BPDU (Bridge Protocol Data Unit) packets. -HUB_AO_NoIPv6DefaultRouterInRAWhenIPv6 If you set this option to non-zero value, then all VPN Sessions on the Virtual Hub will have the enabled ""No Default-Router on IPv6 RA (physical IPv6)"" security policy. When the physical communication protocol between VPN Client / VPN Bridge and VPN Server is IPv6, any IPv6 RA (Router Advertisement) packet with non-zero value in the router-lifetime will set to zero-value. This is effective to avoid the horrible behavior from the IPv6 routing confusion which is caused by the VPN client's attempts to use the remote-side IPv6 router as its local IPv6 router. +HUB_AO_NoIPv6DefaultRouterInRAWhenIPv6 If you set this option to non-zero value, then all VPN Sessions on the Virtual Hub will have the enabled "No Default-Router on IPv6 RA (physical IPv6)" security policy. When the physical communication protocol between VPN Client / VPN Bridge and VPN Server is IPv6, any IPv6 RA (Router Advertisement) packet with non-zero value in the router-lifetime will set to zero-value. This is effective to avoid the horrible behavior from the IPv6 routing confusion which is caused by the VPN client's attempts to use the remote-side IPv6 router as its local IPv6 router. HUB_AO_NoLookBPDUBridgeId If you set this option to non-zero value, then the Virtual Hub will ignore the source MAC field in a BPDU (Bridge Protocol Data Unit) packet. This value will be much more advanced. Do not modify it unless you are very ultra special expert of computer networking. HUB_AO_NoManageVlanId If you set this option to non-zero value, then the Virtual Hub will not use VLAN ID on the MAC address table. Any VLAN ID in tagged-VLAN packets will be ignored. HUB_AO_VlanTypeId Specify the Ethernet Type ID (TPID) of VLAN tags in decimal. The default value is 33024 (0x8100 in hex). This value will be much more advanced. Do not modify it unless you are very ultra special expert of computer networking. @@ -533,10 +532,10 @@ HUB_AO_NoIPv6PacketLog If you set this option to non-zero value, then IPv6 packe HUB_AO_NoSpinLockForPacketDelay If you set this option to non-zero value, then the VPN Server will not use spin-lock mechanisms to simulate the delay of packets when the packet-delay generating function is applied to the packet. Instead, the timer interrupt by the operating system will be adopted. It will reduce the CPU time, however the resolution of generating delays will deteriorate. HUB_AO_BroadcastStormDetectionThreshold Specify the threshold to detect the broadcast storm per a second. When the number of broadcast packets from a particular VPN Session exceeded this threshold, packets will be regarded as broadcast storm and become subjects to be filtered. The default value (zero-value) is 32. HUB_AO_ClientMinimumRequiredBuild If you set this option to non-zero value, then the Virtual Hub will deny any access from VPN Client which has less build number than this value. -HUB_AO_RequiredClientId If you set this option to non-zero value, then the Virtual Hub will deny any access from VPN Client which doesn't have the embedded ""Client ID"" value in the software. +HUB_AO_RequiredClientId If you set this option to non-zero value, then the Virtual Hub will deny any access from VPN Client which doesn't have the embedded "Client ID" value in the software. HUB_AO_AdjustTcpMssValue If you set this option to non-zero value, then the Virtual Hub will adjust MSS (Max Segment Size) values of headers of all TCP/IP packets not to exceed this value. HUB_AO_DisableAdjustTcpMss If you set this option to non-zero value, then any MSS (Max Segment Size) options on the Virtual Hub will be disabled. Even if the AdjustTcpMssValue option is specified, or a VPN Session is made by IPsec / L2TP / EtherIP / L2TPv3 Server Function, the adjustment of MSS will be disabled. -HUB_AO_NoDhcpPacketLogOutsideHub If you set this option to non-zero value, then the Virtual Hub will not record non-related DHCP packets to the packet log. ""Non-related DHCP packets"" are DHCP packets which are not bound to any VPN Session on the Virtual Hub. +HUB_AO_NoDhcpPacketLogOutsideHub If you set this option to non-zero value, then the Virtual Hub will not record non-related DHCP packets to the packet log. "Non-related DHCP packets" are DHCP packets which are not bound to any VPN Session on the Virtual Hub. HUB_AO_DisableHttpParsing If you set this option to non-zero value, then the Virtual Hub will not perform parsing HTTP headers in all HTTP packets. It will reduce the usage of CPU and RAM, however the HTTP access logs will not be recorded. HUB_AO_DisableUdpAcceleration If you set this option to non-zero value, then all UDP Acceleration Function will be disabled on the all VPN Sessions of the Virtual Hub. HUB_AO_DisableUdpFilterForLocalBridgeNic If you set this option to non-zero value, then the Virtual Hub disables the trouble-preventing filtering function to filter DHCP packets which might causes of network unstable. By default, a local bridge interface sometimes try to acquire an IP address from remote-side DHCP server, however such a behavior should infinite loop in the routing table. The filtering function can avoid such problems. This option can disable the filtering function. @@ -547,7 +546,7 @@ HUB_AO_SecureNAT_MaxTcpSynSentPerIp If you set this option to non-zero value, th HUB_AO_SecureNAT_MaxUdpSessionsPerIp If you set this option to non-zero value, then the number of UDP sessions per IP state will be limited to this value. HUB_AO_SecureNAT_MaxDnsSessionsPerIp If you set this option to non-zero value, then the number of DNS sessions per IP which is not SYN_SENT state will be limited to this value. HUB_AO_SecureNAT_MaxIcmpSessionsPerIp If you set this option to non-zero value, then the number of ICMP sessions per IP which is not SYN_SENT state will be limited to this value. -HUB_AO_AccessListIncludeFileCacheLifetime Specify a period in seconds to hold the cache of external user-list files which is for an access list entry which has ""include:"" or ""exclude:"" formats as its username. +HUB_AO_AccessListIncludeFileCacheLifetime Specify a period in seconds to hold the cache of external user-list files which is for an access list entry which has "include:" or "exclude:" formats as its username. HUB_AO_DisableKernelModeSecureNAT If you set this option to non-zero value, then the Kernel-mode NAT function on the SecureNAT function will be disabled. Kernel-mode NAT is a function to accelerate the performance of the Virtual NAT function on SecureNAT. Kernel-mode NAT can work only when the VPN Server process is running with system privileges (i.e. root, SYSTEM or Administrators contexts.). If the Kernel-mode NAT causes something wrong operations, use this option to disable it. HUB_AO_DisableUserModeSecureNAT If you set this option to non-zero value, then the User-mode NAT function on the SecureNAT function will be disabled. User-mode NAT is a function to make the NAT possible to run as normal-user privileges. HUB_AO_DisableCheckMacOnLocalBridge If you set this option to non-zero value, the MAC address duplication check will be disabled on the Local Bridge function. There might be a case when some network adapters has a problem that reflects outgoing packets towards the Virtual Hub. A Virtual HUB detects such duplications automatically, and discards them. Enable this flag to disable the detection and discarding. @@ -559,12 +558,12 @@ HUB_AO_DropBroadcastsInPrivacyFilterMode Drop broadcasting packets if the both s HUB_AO_DropArpInPrivacyFilterMode Drop ARP packets if the both source and destination session is PrivacyFilter mode. HUB_AO_SuppressClientUpdateNotification Suppress the update notification screen on the VPN Client. HUB_AO_FloodingSendQueueBufferQuota Specify the quota limitation value (in bytes) of the sending queue buffer size which the flooding operation on the Virtual Hub can consume. The quota value is applied on the total length of sending queues of all active VPN sessions. Specify '0' to disable the quota. This option is effective to solve the out-of-memory problem on the network where there are many flooding packets. -HUB_AO_AssignVLanIdByRadiusAttribute Enable the VLAN ID dynamic assignment function. Each VPN session will be assigned its own VLAN ID by the RADIUS attribute value when the user is authenticated by the external RADIUS server unless the user object has a VLAN ID security policy. The RADIUS attribute with the name ""Tunnel-Pvt-Group-ID"" (ID = 81) will be used as the VLAN ID. The data type must be STRING. -HUB_AO_DenyAllRadiusLoginWithNoVlanAssign If you set this option to non-zero value, then all users, which RADIUS server returns no ""Tunnel-Pvt-Group-ID"" (ID = 81) value, will be denied to connect to the Virtual Hub. (Only if the values of AssignVLanIdByRadiusAttribute is non-zero value.) +HUB_AO_AssignVLanIdByRadiusAttribute Enable the VLAN ID dynamic assignment function. Each VPN session will be assigned its own VLAN ID by the RADIUS attribute value when the user is authenticated by the external RADIUS server unless the user object has a VLAN ID security policy. The RADIUS attribute with the name "Tunnel-Pvt-Group-ID" (ID = 81) will be used as the VLAN ID. The data type must be STRING. +HUB_AO_DenyAllRadiusLoginWithNoVlanAssign If you set this option to non-zero value, then all users, which RADIUS server returns no "Tunnel-Pvt-Group-ID" (ID = 81) value, will be denied to connect to the Virtual Hub. (Only if the values of AssignVLanIdByRadiusAttribute is non-zero value.) HUB_AO_SecureNAT_RandomizeAssignIp If you set this option to non-zero value, then the Virtual DHCP Server of the SecureNAT function will choose an unused IP address randomly from the DHCP pool while the default behavior is to choose the first unused IP address. HUB_AO_DetectDormantSessionInterval If you set this option to non-zero value, then the Virtual Hub will treat the VPN sessions, which have transmitted no packets for the last specified intervals (in seconds), as Dormant Sessions. The Virtual Hub will not flood packets, which should be flood, to any Dormant Sessions. HUB_AO_NoPhysicalIPOnPacketLog If you set this option to non-zero value, then the physical IP addresses of VPN clients of either the source VPN session or the destination VPN session will not be recorded on the packet log file. -HUB_AO_UseHubNameAsDhcpUserClassOption If you set this option to non-zero value, then the Virtual Hub Name will be added to a DHCP request to an external DHCP server as the ""User-Class"" option. This allows to use separate pools of IP addresses for each Virtual Hub. (For only L2TP/IPsec and OpenVPN sessions.) +HUB_AO_UseHubNameAsDhcpUserClassOption If you set this option to non-zero value, then the Virtual Hub Name will be added to a DHCP request to an external DHCP server as the "User-Class" option. This allows to use separate pools of IP addresses for each Virtual Hub. (For only L2TP/IPsec and OpenVPN sessions.) HUB_AO_UseHubNameAsRadiusNasId If you set this option to non-zero value, then the NAS-Identifier RADIUS attribute will be set to a name of the Virtual Hub. This allows to determine on RADIUS server whether access to the Virtual Hub should be granted or denied. @@ -574,7 +573,7 @@ ERRDLG_RETRYCOUNT An automatic reconnection will be made after %u seconds... ERRDLG_INFORMATION Click Retry to start connecting again. ERRDLG_RETRY_INFO_1 Do you wish to retry? (%u retries / %u total retries) ERRDLG_RETRY_INFO_2 Do you wish to retry? (%u retries / total infinite retries) -ERRDLG_DISCONNECTED_MSG Connection to VPN Server ""%S"" has been disconnected. +ERRDLG_DISCONNECTED_MSG Connection to VPN Server "%S" has been disconnected. ERRDLG_DEVICE_ERROR The connection with the VPN Server has been disconnected because the Virtual Network Adapter (device name: %S) has been stopped. \r\n\r\nError code %u: %s @@ -767,7 +766,7 @@ POL_EX_32 All IPv4 and ARP packets in sessions defined this policy will be filte POL_33 Filter All IPv6 Packets POL_EX_33 All IPv6 packets in sessions defined this policy will be filtered. POL_34 Filter All Non-IP Packets -POL_EX_34 All non-IP packets in sessions defined this policy will be filtered. ""Non-IP packet"" mean a packet which is not IPv4, ARP nor IPv6. Any tagged-VLAN packets via the Virtual Hub will be regarded as non-IP packets. +POL_EX_34 All non-IP packets in sessions defined this policy will be filtered. "Non-IP packet" mean a packet which is not IPv4, ARP nor IPv6. Any tagged-VLAN packets via the Virtual Hub will be regarded as non-IP packets. POL_35 No Default-Router on IPv6 RA POL_EX_35 In all VPN Sessions defines this policy, any IPv6 RA (Router Advertisement) packet with non-zero value in the router-lifetime will set to zero-value. This is effective to avoid the horrible behavior from the IPv6 routing confusion which is caused by the VPN client's attempts to use the remote-side IPv6 router as its local IPv6 router. POL_36 No Default-Router on IPv6 RA (physical IPv6) @@ -808,7 +807,7 @@ CM_ACCOUNT_ONLINE Conectado CM_ACCOUNT_CONNECTING Conectando CM_VLAN_ENABLED Ativado CM_VLAN_DISABLED Desativado -CM_DELETE_ACCOUNT_MSG This will delete the VPN Connection Setting ""%s"". Do you really want to do this? +CM_DELETE_ACCOUNT_MSG This will delete the VPN Connection Setting "%s". Do you really want to do this? CM_ST_ACCOUNT_NAME Nome da configuração da conexão VPN CM_ST_CONNECTED Session Status CM_ST_CONNECTED_TRUE Connection Completed (Session Established) @@ -890,7 +889,7 @@ CM_CLIENT_CERT_2 Delete &Client Certificate CM_CERT_INFO Issued to: %s\r\nIssuer: %s\r\nExpiration: %s CM_NO_CERT Você deve especificar um certificado do cliente a ser usado para autenticação do usuário. CM_NO_SECURE Specify the client certificate and private key inside the smart card to be used for user authentication. -CM_CERT_SECURE_INFO Certificate: ""%S""\r\nPrivate Key: ""%S"" +CM_CERT_SECURE_INFO Certificate: "%S"\r\nPrivate Key: "%S" CM_SELECT_SECURE_DEVICE Selecionar Smart Card CM_SELECT_CERT_INCARD Specify Cert and Pri&vate Key CM_VIEW_CLIENT_CERT &View Client Certificate @@ -907,12 +906,12 @@ CM_PORT_4 5555 (SE-VPN Port) CM_RETRY_INTERVAL_ERROR Set a re-connection interval (at least 5 seconds) when VPN connection has been disconnected. CM_DELETE_CLIENT_CERT This will delete the client certificate that has been set. Do you really want to do this? CM_DELETE_SERVER_CERT This will delete the server individual certificate that has been set. Do you really want to do this? -CM_SET_STARTUP The VPN Connection Setting ""%s"" is now set as a startup connection.\r\n\r\nThis account will be connected automatically next time the computer restarts.\r\n(If you are using Windows, the automatic connection will be started in the background mode before a user logs on to Windows.) -CM_REMOVE_STARTUP Do you wish to delete the startup connection property of VPN Connection Setting ""%s""? +CM_SET_STARTUP The VPN Connection Setting "%s" is now set as a startup connection.\r\n\r\nThis account will be connected automatically next time the computer restarts.\r\n(If you are using Windows, the automatic connection will be started in the background mode before a user logs on to Windows.) +CM_REMOVE_STARTUP Do you wish to delete the startup connection property of VPN Connection Setting "%s"? CM_NO_DISCONNECT_SPAN Please set the life of the TCP connection. CM_HALF_MSG When using half-duplex mode, set at least 2 for the number of TCP connections. CM_TOO_SMALL_INTERVAL Set at least 1 second for the interval to establish a TCP connection. -CM_DELETE_VLAN This will delete the Virtual Network Adapter ""%s"". Do you really want to do this? +CM_DELETE_VLAN This will delete the Virtual Network Adapter "%s". Do you really want to do this? CM_COPY_NAME_1 Copia de %s CM_COPY_NAME_2 Copy (%u) of %s CM_IMPORT_NAME_1 %s @@ -924,27 +923,27 @@ CM_CERT_DELETE_MSG Delete this certificate from the list? CM_PASSWORD_SET The password has been set. CM_PASSWORD_REMOVE The password setting has been deleted. CM_UNDER_CONSTRUCTION Incompleto. -CM_CURRENT_ACTIVE The settings of VPN Connection Setting ""%s"" were saved. But this VPN Connection Setting is currently online and the new settings will apply in the next connection. +CM_CURRENT_ACTIVE The settings of VPN Connection Setting "%s" were saved. But this VPN Connection Setting is currently online and the new settings will apply in the next connection. CM_DISCONNECT_ALL This will disconnect all %u VPN Connection Settings that are currently connected. \r\nDo you really want to do this? CM_HTTPS_MSG You have chosen to connect via an HTTP proxy server. \r\n\r\nUsual HTTP proxy servers do not allow access to a TCP port of your choice. \r\nWhen a VPN Client connects to a VPN Server via a HTTP proxy server, it is possible to connect by using HTTPS (HTTP over SSL) communication. \r\nIn this case it is recommended that you specify 443 (HTTPS Port) as the destination VPN Server port number. \r\n(If you specify a different port number, there are cases where it will not be possible to connect via an HTTP proxy server. \r\n Make sure that port 443 is enabled on the destination VPN Server.)\r\n\r\nFor detailed information contact either the system administrator or network administrator of the HTTP proxy server you plan to connect via. \r\n\r\nDo you want to change the port number specification of the destination VPN Server to 443 (HTTPS Port)? -CM_REMOTE_WARNING You are making changes to the remote management setting that will disallow remote management. \r\n\r\nCurrently the VPN Client Manager is connected to remote computer ""%S"" and is controlling the VPN Client service on that computer. \r\nIf remote connection is disabled, it will no longer be possible to remotely connect to and control the VPN Client service on computer ""%S"" using the VPN Client Manager. \r\n\r\nDo you want to disable remote management? +CM_REMOTE_WARNING You are making changes to the remote management setting that will disallow remote management. \r\n\r\nCurrently the VPN Client Manager is connected to remote computer "%S" and is controlling the VPN Client service on that computer. \r\nIf remote connection is disabled, it will no longer be possible to remotely connect to and control the VPN Client service on computer "%S" using the VPN Client Manager. \r\n\r\nDo you want to disable remote management? CM_KEEP_INTERVAL_MSG Set a period between %u and %u seconds in the Packet Send Interval. CM_REMOTE_TITLE Using the VPN Client Manager, it is possible to connect to, and remotely manage a VPN Client service operating on another computer. \r\n(Note that the VPN Client service on the remote computer must allow remote management.) CM_DESKTOP_LOCAL_PC Computador local CM_DESKTOP_REMOTE_PC Computador %S CM_DESKTOP_MSG_LOCAL_TS Terminal Service (Remote Desktop) Function CM_DESKTOP_MSG_LOCAL_SW Switch User Function -CM_DESKTOP_MSG_LOCAL_1 Currently %s is installed on this computer, providing an environment that permits multiple users to log on concurrently. In this case, the messages regarding progress status, error messages and other messages displayed by VPN Client will be displayed on a session called the ""Console Session"". -CM_DESKTOP_MSG_LOCAL_21 Currently ""Session ID: 0, User %s"" is assigned as the Console Session of this computer, however because you have started VPN Client Manager on session %u, it is not possible to display the message windows such as the progress status or errors that VPN Client displays. -CM_DESKTOP_MSG_LOCAL_22 Currently no one is logged into the Console Session ""Session ID: 0"" of this computer and because you have started VPN Client Manager on session %u, it is not possible to display the message windows such as the progress status or errors that VPN Client displays. -CM_DESKTOP_MSG_LOCAL_31 It is recommended that when this computer's Console Session (Session ID: 0, User %s) is displayed, start the VPN Client Manager in that session and start the connection to the VPN Connection Setting ""%s"". You will be able to start a connection process by doing what you are doing now. But it will be at the risk of being unable to check the progress status and error messages that may be displayed during the process. -CM_DESKTOP_MSG_LOCAL_32 It is recommended that you first log off and then after logging in locally, start the VPN Client Manager in that session and start the connection to VPN Connection Setting ""%s"". Although you will be able to start a connection process by doing what you are doing now, this will be at the risk of being unable to check the progress status and error messages that may be displayed during the process. +CM_DESKTOP_MSG_LOCAL_1 Currently %s is installed on this computer, providing an environment that permits multiple users to log on concurrently. In this case, the messages regarding progress status, error messages and other messages displayed by VPN Client will be displayed on a session called the "Console Session". +CM_DESKTOP_MSG_LOCAL_21 Currently "Session ID: 0, User %s" is assigned as the Console Session of this computer, however because you have started VPN Client Manager on session %u, it is not possible to display the message windows such as the progress status or errors that VPN Client displays. +CM_DESKTOP_MSG_LOCAL_22 Currently no one is logged into the Console Session "Session ID: 0" of this computer and because you have started VPN Client Manager on session %u, it is not possible to display the message windows such as the progress status or errors that VPN Client displays. +CM_DESKTOP_MSG_LOCAL_31 It is recommended that when this computer's Console Session (Session ID: 0, User %s) is displayed, start the VPN Client Manager in that session and start the connection to the VPN Connection Setting "%s". You will be able to start a connection process by doing what you are doing now. But it will be at the risk of being unable to check the progress status and error messages that may be displayed during the process. +CM_DESKTOP_MSG_LOCAL_32 It is recommended that you first log off and then after logging in locally, start the VPN Client Manager in that session and start the connection to VPN Connection Setting "%s". Although you will be able to start a connection process by doing what you are doing now, this will be at the risk of being unable to check the progress status and error messages that may be displayed during the process. CM_DESKTOP_MSG_REMOTE_1 Because you are currently performing operation while remotely connected to VPN Client on computer %S, if the VPN Client displays any progress status or error messages during the VPN connection process to the VPN Connection Setting, you will not be able to check these messages from your current screen display. CM_DESKTOP_MSG_REMOTE_2 To check all the progress status, error and other message windows that VPN Client displays, you must log in locally to computer %S and display the Control Session (desktop). -CM_DESKTOP_MSG_REMOTE_3 It is recommended that you first log in directly and locally to computer %S, and then start the VPN Client Manager in that session and start the connection to VPN Connection Setting ""%s"". Although you will be able to start a connection process by doing what you are doing now, this will be at the risk of being unable to check the progress status and error messages that may be displayed during the process. -CM_STOP_INST_VLAN_1 To install a Virtual Network Adapter on this computer you must start the VPN Client Manager within a ""Console Session"". \r\n\r\nCurrently, %s is installed on this computer and the current user is not logged into the Console Session but rather is logged in as the remote session (session ID: %u).\r\nTo install a Virtual Network Adapter, VPN Client Manager must be started in the Console Session (session ID: %u, user %s is logged on). \r\n\r\nFirst log on to the computer locally by using the user switching function, or the /console switch function that is on the remote desktop, or alternatively the computer's local console device and then start the VPN Client Manager and install the Virtual Network Adapter. -CM_STOP_INST_VLAN_2 To install a Virtual Network Adapter on this computer you must start the VPN Client Manager within a ""Console Session"". \r\n\r\nCurrently, %s is installed on this computer and the current user is not logged into the Console Session but rather is logged in as the remote session (session ID: %u).\r\nTo install a Virtual Network Adapter you must start the VPN Client Manager within a ""Console Session"". \r\n(Currently the user is not logged on to the Console Session (Session ID: 0).) \r\n\r\nFirst log on to the computer locally by using the user switching function, or the /console switch function that is on the remote desktop, or alternatively the computer's local console device and then start the VPN Client Manager and install the Virtual Network Adapter. -CM_SHORTCUT_DESKTOP_MSG To start a connection using the shortcut to the VPN Connection Setting, you must launch the shortcut file within the ""Console Session"". \r\n\r\nCurrently the user is logged on as the remote session (session ID: %u) and not as the Console Session. +CM_DESKTOP_MSG_REMOTE_3 It is recommended that you first log in directly and locally to computer %S, and then start the VPN Client Manager in that session and start the connection to VPN Connection Setting "%s". Although you will be able to start a connection process by doing what you are doing now, this will be at the risk of being unable to check the progress status and error messages that may be displayed during the process. +CM_STOP_INST_VLAN_1 To install a Virtual Network Adapter on this computer you must start the VPN Client Manager within a "Console Session". \r\n\r\nCurrently, %s is installed on this computer and the current user is not logged into the Console Session but rather is logged in as the remote session (session ID: %u).\r\nTo install a Virtual Network Adapter, VPN Client Manager must be started in the Console Session (session ID: %u, user %s is logged on). \r\n\r\nFirst log on to the computer locally by using the user switching function, or the /console switch function that is on the remote desktop, or alternatively the computer's local console device and then start the VPN Client Manager and install the Virtual Network Adapter. +CM_STOP_INST_VLAN_2 To install a Virtual Network Adapter on this computer you must start the VPN Client Manager within a "Console Session". \r\n\r\nCurrently, %s is installed on this computer and the current user is not logged into the Console Session but rather is logged in as the remote session (session ID: %u).\r\nTo install a Virtual Network Adapter you must start the VPN Client Manager within a "Console Session". \r\n(Currently the user is not logged on to the Console Session (Session ID: 0).) \r\n\r\nFirst log on to the computer locally by using the user switching function, or the /console switch function that is on the remote desktop, or alternatively the computer's local console device and then start the VPN Client Manager and install the Virtual Network Adapter. +CM_SHORTCUT_DESKTOP_MSG To start a connection using the shortcut to the VPN Connection Setting, you must launch the shortcut file within the "Console Session". \r\n\r\nCurrently the user is logged on as the remote session (session ID: %u) and not as the Console Session. CM_HTTP_PROXY_WARNING Connect via HTTP Proxy Server is selected. \r\n\r\nIn many cases, the HTTP proxy server will only allow 2 kinds of TCP port to be used for the connection to the destination server port number, HTTP protocol (TCP port number 80) and HTTPS protocol (TCP port number 443). \r\n(There are also cases when the proxy server does allow a wider choice of TCP port for connection.) \r\n\r\nWhen making a VPN connection via an HTTP proxy server that denies connections to server ports other than HTTP ports or HTTPS ports, you must specify 443 (HTTPS protocol) as the destination VPN Server port number. \r\n\r\nTo check whether the HTTP proxy server you are connecting via allows connection to ports other than port numbers 80 or 443, contact the administrator of the HTTP proxy server. \r\n\r\nCurrently, %d is specified as the destination VPN Server port number. Do you want to change the port number to 443 (HTTPS protocol)?\r\n(The port 443 of the VPN Servers you connect to must be set to listening status and ready for connection.) \r\nIf you are unsure, then contact the system administrator or the network administrator. CM_HTTP_HEADER_COLUMN_0 Nome CM_HTTP_HEADER_COLUMN_1 Valor @@ -960,7 +959,7 @@ CM_ACCOUNT_MSG_SENSITIVE This VPN Connection Setting has the username and the pa CM_SHORTCUT_FILE Shortcut Files|*.lnk CM_SHORTCUT_SAVE_TITLE Enter the Shortcut File Name. CM_SHORTCUT_UNSUPPORTED The connection shortcut function is not supported by this version of VPN Client. \r\nUpdate to a new version. -CM_SHORTCUT_COMMENT Using the VPN Connection Setting ""%s"" to connect to the VPN Server. +CM_SHORTCUT_COMMENT Using the VPN Connection Setting "%s" to connect to the VPN Server. CM_SHORTCUT_ERROR Failed to create a shortcut. CM_VPN_FILE_CLICKED Do you want to import the VPN Connection File? CM_VPN_FILE_IMPORT_NG Unable to import the VPN Connection Setting File. Because the VPN Client setting has been locked. @@ -987,7 +986,7 @@ CM_TRAY_MENU_ABOUT &Sobre o gerenciador de clientes VPN... CM_TRAY_MENU_SETTING Change Operation &Mode... CM_TRAY_MENU_CANCEL Close this menu CM_EXIT_MESSAGE This will exit the VPN Client Manager program. \r\nDo you really want to do this? -CM_IMPORT_MESSAGE From file ""%S"", VPN Connection Setting ""%s"" has been installed. +CM_IMPORT_MESSAGE From file "%S", VPN Connection Setting "%s" has been installed. CM_VLAN_CREATING Criando um novo adaptador de rede virtual para o Windows.\r\n\r\nEste processo pode levar alguns segundos ou mais de um minuto.\r\nPor favor, aguarde...\r\n\r\n (Por favor, não execute outras operações enquanto o adaptador de rede virtual estiver sendo instalado) CM_SETTING_PASSWORD The setting is locked. To remove the setting-locker, you must enter a password. CM_EASY_MODE_NOT_ON_REMOTE Unable to connect because of the VPN Client on the remote computer is running in Easy Mode. @@ -1003,8 +1002,8 @@ CM_EASY_CONNECTED VPN connection is active. CM_EASY_CONNECTING Establishing VPN connection... CM_PROXY_FROM_IE Currently proxy setting from Internet Explorer has been loaded. CM_TRAY_ICON_RESTORE The icon in the task tray has been deleted.\r\n\r\nTo restore the icon, run the VPN Client Manager and click Show Task-tray Icon in the View menu. -CM_WOULDYOULOAD_IE_PROXY Currently the Internet Explorer on this computer is configured to use the proxy server ""%S"".\r\nDo you want to apply the current proxy settings on the new VPN connection setting?\r\n\r\nClick Yes to use the proxy settings of Internet Explorer.\r\nClick No to use direct connection to the VPN Server (does not a proxy server.)\r\nThis setting can be modified in the property screen of the connection settings any time later. -CM_MSG_TITLE VPN Server ""%S"" (Virtual Hub: ""%S"") +CM_WOULDYOULOAD_IE_PROXY Currently the Internet Explorer on this computer is configured to use the proxy server "%S".\r\nDo you want to apply the current proxy settings on the new VPN connection setting?\r\n\r\nClick Yes to use the proxy settings of Internet Explorer.\r\nClick No to use direct connection to the VPN Server (does not a proxy server.)\r\nThis setting can be modified in the property screen of the connection settings any time later. +CM_MSG_TITLE VPN Server "%S" (Virtual Hub: "%S") CM_JUMPLIST_RCCONNECT Servidores VPN recentes CM_VPNGATE_MESSAGE There is the list of Public VPN Relay Servers on the VPN Gate Academic Project Web Site.\r\nAnyone on the Internet can connect a VPN connection to any VPN servers on the list.\r\n\r\nVPN Gate Academic Project is not a part of SoftEther VPN.\r\nThis icon provides just a link to http://www.vpngate.net/.\r\nYou need to install VPN Gate Plugin to connect VPN Gate.\r\n\r\nDo you want to visit http://www.vpngate.net/ (provided by University of Tsukuba) ? CM_VLAN_REINSTALL_MSG After reinstalling the Virtual Network Adapter driver, the current Virtual Network Adapter's MAC address will change. Also, all TCP/IP settings within the Virtual Network Adapter will reset.\r\n\r\nIn case the reinstalled Virtual Network Adapter fails to work, delete it and create a new one. If it still doesn't work properly, please create a new Virtual Network Adapter with a different name. @@ -1037,7 +1036,7 @@ VGC_VER_DIFF The version of VPN Gate Client Plug-in is different from SoftEther VGC_LIST_STR_OK %S Public VPN Relay Servers on the Earth! (Updated at %S) VGC_LIST_STR_OK_2 %S Servers (at %S) - List update failed. Try again. If fails again, download the latest VPN Gate Client. VGC_LIST_STR_NG List update failed. Try again. If fails again, download the latest VPN Gate Client. -VGC_PROXY_MSG If you are using a proxy server, you might not be able to use VPN Relay Servers which don't support the TCP port 443 as ""SSL-VPN Connection"" from such a proxy-mandated network. +VGC_PROXY_MSG If you are using a proxy server, you might not be able to use VPN Relay Servers which don't support the TCP port 443 as "SSL-VPN Connection" from such a proxy-mandated network. VGC_PROXY_TITLE Notice for Proxy Server Users VGS_NO_HUB_YET In order to set the message, first you have to commit enabling the VPN Gate service. After the service will be enabled, re-open this window and set the message. VGS_STOP VPN Gate Service will stop after you click the OK button.\r\n\r\nAfter VPN Gate Service will be stopped, this computer will never accept new VPN connection requests, however, still-alive VPN Sessions might remain.\r\n (Such VPN sessions sometimes hidden from the enumeration.) \r\n\r\nTo terminate all of still-alive VPN Sessions completely, restart SoftEther VPN Server or SoftEther VPN Client service, or reboot the computer. @@ -1047,22 +1046,22 @@ VGS_START This will activate the VPN Gate Relay Service function.\r\n\r\nVPN Gat # Concerning services (Win32) SVC_HELP *** Command Line Arguments of %s (%S) ***\r\n\r\nThis program (%s) is a process runs as a background task. Start the program by specifying the following arguments on the command line. \r\n\r\n\r\n/install : Installs %s service (service name: %S) in Windows. After this, the service will automatically start. \r\n\r\n/uninstall... Uninstalls %s service (service name: %S) from Windows. \r\n\r\n/start : Starts %s service (service name: %S). \r\n\r\n/stop : Stops %s service (service name: %S). \r\n\r\n/test : Starts %s program in test mode. (For debug)\r\n\r\n/usermode : Starts %s program in the user mode. (When possible)\r\n\r\n/usermode_showtray : When starting in the user mode, this is used to display task tray icons when they were set to be hidden on a previous occasion. \r\n\r\n/usermode_hidetray : When starting in the user mode, this sets the task tray icons to be hidden. \r\n\r\n\r\nNote: Commands related to service operation other than /test and /usermode can only be operated on Windows NT / XP / Server 2003 / Vista / Server 2008. SVC_NT_ONLY The service related operation commands can only operate on Windows NT / 2000 / XP / Server 2003 / Vista / Server 2008. \r\nThey do not operate on Windows 98 / Me. -SVC_ALREADY_INSTALLED The ""%s"" service (service name: %S) is already installed on this computer. Do you want to uninstall it and then re-install? -SVC_INSTALL_OK The ""%s"" service (Service name: %S) has been installed successfully. \r\n\r\n(Execution path: %s)\r\n\r\nThe service has started. -SVC_INSTALL_FAILED The installation of the ""%s"" service (service name: %S) failed. -SVC_INSTALL_FAILED_2 The ""%s"" service (Service name: %S) has been successfully installed. \r\n\r\n(Execution path: %s)\r\n\r\nAn attempt to start the service, however, failed. -SVC_NOT_INSTALLED The ""%s"" service (service name: %S) is not yet installed on this computer. Use the /install command line argument to install it. -SVC_START_OK The ""%s"" service (service name: %S) started successfully. -SVC_START_FAILED The ""%s"" service (service name: %S) failed to start. -SVR_ALREADY_START The ""%s"" service (service name: %S) has already started. -SVC_STOP_OK The ""%s"" service (Service name: %S) has been stopped. -SVC_STOP_FAILED The ""%s"" service (service name: %S) failed to stop. -SVC_ALREADY_STOP The ""%s"" service (service name: %S) is already stopped. -SVC_UNINSTALL_OK The ""%s"" service (Service name: %S) has been uninstalled successfully. -SVC_UNINSTALL_FAILED The uninstallation of the ""%s"" service (service name: %S) failed. +SVC_ALREADY_INSTALLED The "%s" service (service name: %S) is already installed on this computer. Do you want to uninstall it and then re-install? +SVC_INSTALL_OK The "%s" service (Service name: %S) has been installed successfully. \r\n\r\n(Execution path: %s)\r\n\r\nThe service has started. +SVC_INSTALL_FAILED The installation of the "%s" service (service name: %S) failed. +SVC_INSTALL_FAILED_2 The "%s" service (Service name: %S) has been successfully installed. \r\n\r\n(Execution path: %s)\r\n\r\nAn attempt to start the service, however, failed. +SVC_NOT_INSTALLED The "%s" service (service name: %S) is not yet installed on this computer. Use the /install command line argument to install it. +SVC_START_OK The "%s" service (service name: %S) started successfully. +SVC_START_FAILED The "%s" service (service name: %S) failed to start. +SVR_ALREADY_START The "%s" service (service name: %S) has already started. +SVC_STOP_OK The "%s" service (Service name: %S) has been stopped. +SVC_STOP_FAILED The "%s" service (service name: %S) failed to stop. +SVC_ALREADY_STOP The "%s" service (service name: %S) is already stopped. +SVC_UNINSTALL_OK The "%s" service (Service name: %S) has been uninstalled successfully. +SVC_UNINSTALL_FAILED The uninstallation of the "%s" service (service name: %S) failed. SVC_NOT_FOUND Unable to find information related to service %S from the string table. SVC_NOT_ADMIN To install, uninstall, start or stop the service you must have administrator privileges for this computer. \r\n\r\nIf you have an administrators account for this computer, log out and log on as an administrator. \r\nIf you are unclear about administrators accounts, contact your system administrator. -SVC_TEST_MSG The ""%s"" service is started in test mode. \r\n\r\nClick OK to exit the service. +SVC_TEST_MSG The "%s" service is started in test mode. \r\n\r\nClick OK to exit the service. SVC_TRAY_TOOLTIP %S (Modo usuário) SVC_TEST_MUTEX The executable file %s is already started. SVC_USERMODE_MUTEX Another process of %s is already started. @@ -1078,8 +1077,8 @@ UNIX_SVC_STARTED The %S service has been started.\n UNIX_SVC_STOPPING Stopping the %S service ...\n UNIX_SVC_STOPPED %S service has been stopped.\n UNIX_SVC_STOP_FAILED Stopping %S service was failed.\n -UNIX_SVC_ALREADY_START %S service has been already started.\nRun the ""%S stop"" command to stop this service.\n -UNIX_SVC_NOT_STARTED %S service has not yet been started.\nRun the ""%S start"" to start this service.\n +UNIX_SVC_ALREADY_START %S service has been already started.\nRun the "%S stop" command to stop this service.\n +UNIX_SVC_NOT_STARTED %S service has not yet been started.\nRun the "%S start" to start this service.\n UNIX_SVC_ERROR_FORK Failed to create child process for the %S service.\n UNIX_SVC_NONROOT \nWarning: The current user context is non-root. It is recommended to run the VPN service by the root user. Although the VPN service may run under non-root users, some privilege-required functions (e.g. the local bridge function) need the root privilege.\n @@ -1135,8 +1134,8 @@ SVC_ELOGSVC_DESCRIPT SoftEther EtherLogger is a service that captures data flowi # Concerning SoftEther VPN Server Manager SM_TITLE Edição de desenvolvedor do gerenciador SoftEther VPN Servidor SM_LOCALHOST localhost (This server) -SM_SERVER_BRIDGE_TITLE Manage VPN Bridge ""%S"" -SM_S_VHUB_BRIDGE When using VPN Bridge, you manage Virtual Hub ""BRIDGE"" to operate management of VPN Bridge. +SM_SERVER_BRIDGE_TITLE Manage VPN Bridge "%S" +SM_S_VHUB_BRIDGE When using VPN Bridge, you manage Virtual Hub "BRIDGE" to operate management of VPN Bridge. SM_DISCONNECTED The management connection has been disconnected. SM_MIKAN Under Construction. SM_MAIN_COLUMN_1 Nome da configuração @@ -1146,8 +1145,8 @@ SM_MODE_SERVER Entire VPN Server SM_MODE_HUB Apenas o hub '%S' SM_EDIT_CAPTION_1 New Connection Setting SM_EDIT_CAPTION_2 Editar %s -SM_SETTING_EXISTS A Connection Setting with the same name as Connection Setting ""%s"" is already registered. Specify a different name. -SM_SETTING_DELETE_MSG This will delete the Connection Setting ""%s"". Do you really want to do this? +SM_SETTING_EXISTS A Connection Setting with the same name as Connection Setting "%s" is already registered. Specify a different name. +SM_SETTING_DELETE_MSG This will delete the Connection Setting "%s". Do you really want to do this? SM_PASSWORD_TYPE_STR Password for Administration Connection SM_HUB_COLUMN_1 Nome do Hub Virtual SM_HUB_COLUMN_2 Status @@ -1169,7 +1168,7 @@ SM_SERVER_STANDALONE Standalone Server SM_FARM_CONTROLLER Cluster Controller SM_FARM_MEMBER Cluster Member Server SM_INFORMATION Latest Information -SM_HUB_STATUS_CAPTION Status of Virtual Hub ""%s"" +SM_HUB_STATUS_CAPTION Status of Virtual Hub "%s" SM_HUB_STATUS_HUBNAME Nome do Hub Virtual SM_HUB_STATUS_ONLINE Status SM_HUB_TYPE Tipo @@ -1349,7 +1348,7 @@ SM_AUTHTYPE_3 Signed Certificate Authentication SM_AUTHTYPE_4 RADIUS Authentication SM_AUTHTYPE_5 NT Domain Authentication SM_NO_GROUP - -SM_USER_DELETE_MSG This will delete the user ""%s"". Do you really want to do this? +SM_USER_DELETE_MSG This will delete the user "%s". Do you really want to do this? SM_EDIT_USER_CAPTION_1 Criar novo usuário SM_EDIT_USER_CAPTION_2 Propriedades do usário %S SM_EDIT_USER_CERT_INFO The users using 'Individual Certificate Authentication' will be allowed or denied connection depending on whether the SSL client certificate completely matches the certificate that has been set for the user beforehand. @@ -1358,7 +1357,7 @@ SM_POLICY_DEF_CAPTION Política de segurança SM_LIMIT_STR Specify an integer that is within the range %u to %u. SM_POLICY_INIT_TITLE Select a policy item from the list on the left. SM_USER_CREATE_OK User %S has been created. -SM_USERINFO_CAPTION User ""%S"" Information +SM_USERINFO_CAPTION User "%S" Information SM_USERINFO_NAME Nome de usuário SM_USERINFO_GROUP Nome do grupo SM_USERINFO_CREATE Criado em @@ -1409,17 +1408,17 @@ SM_LINK_STATUS_ONLINE Online (Established) SM_LINK_POLICY_GROUP Cascade Connection Setting SM_LINK_POLICY_CAPTION Security policy settings applicable to Cascade sessions SM_LINK_CONNECTING Conectando -SM_LINK_SAVE_ONLINE Although the Cascade Connection Setting ""%s"" has been changed, this Cascade Connection is currently online. The setting will not be applied until next time the connection is established. -SM_LINK_DELETE_MSG This will delete the settings for Cascade Connection ""%s"". Do you really want to do this? -SM_LINK_OFFLINE_MSG Currently Cascade Connection ""%s"" is active. Do you want to disconnect this connection? -SM_LINK_STATUS_CAPTION Connection status of Cascade Connection ""%s"" +SM_LINK_SAVE_ONLINE Although the Cascade Connection Setting "%s" has been changed, this Cascade Connection is currently online. The setting will not be applied until next time the connection is established. +SM_LINK_DELETE_MSG This will delete the settings for Cascade Connection "%s". Do you really want to do this? +SM_LINK_OFFLINE_MSG Currently Cascade Connection "%s" is active. Do you want to disconnect this connection? +SM_LINK_STATUS_CAPTION Connection status of Cascade Connection "%s" SM_LOG_SWITCH_0 No Switching SM_LOG_SWITCH_1 Switch in Every Second SM_LOG_SWITCH_2 Switch in Every Minute SM_LOG_SWITCH_3 Switch in Every Hour SM_LOG_SWITCH_4 Switch in Every Day SM_LOG_SWITCH_5 Switch in Every Month -SM_SESS_DISCONNECT_MSG This will disconnect session ""%S"". Do you really want to do this? +SM_SESS_DISCONNECT_MSG This will disconnect session "%S". Do you really want to do this? SM_SESS_COLUMN_1 Nome da sessão SM_SESS_COLUMN_2 Localização SM_SESS_COLUMN_3 Nome de usuário @@ -1442,7 +1441,7 @@ SM_SESS_BRIDGE Local Bridge Session SM_SESS_BRIDGE_HOSTNAME Ethernet Bridge SM_SESS_LAYER3_HOSTNAME Virtual Layer 3 Switch SM_SESS_BRIDGE_TCP Nenhum -SM_SESS_STATUS_CAPTION VPN Session ""%S"" Status +SM_SESS_STATUS_CAPTION VPN Session "%S" Status SM_SESS_STATUS_USERNAME User Name (Authentication) SM_SESS_STATUS_REALUSER User Name (Database) SM_SESS_STATUS_GROUPNAME Nome do grupo @@ -1502,10 +1501,10 @@ SM_BRIDGE_OFFLINE Offline SM_BRIDGE_ONLINE Operativo SM_BRIDGE_ERROR Erro SM_BRIDGE_OK The Local Bridge connection definition has been added. -SM_BRIDGE_DELETE Do you want to delete the Local Bridge from Virtual Hub ""%s"" to device ""%s""? +SM_BRIDGE_DELETE Do you want to delete the Local Bridge from Virtual Hub "%s" to device "%s"? SM_BRIDGE_DELETE_OK The Local Bridge has been deleted. SM_BRIDGE_INTEL While in the condition that occurs immediately after a new bridge connection is made when bridging to a physical network adapter, depending on the type of network adapter, there are cases where it will not be possible to communicate using TCP/IP to the network adapter using a bridge connection from a computer on the virtual network. \r\n(This phenomenon is known to occur for Intel and Broadcom network adapters.) \r\n\r\n\r\nIf this issue arises, remedy the situation by restarting the computer on which VPN Server / Bridge is running. Normal communication will be possible after the computer has restarted. \r\n\r\n\r\nAlso many wireless network adapters will not respond to the sending of packets in promiscuous mode and when this occurs you will be unable to use the Local Bridge. If this issue arises, try using a regular wired network adapter instead of the wireless network adapter. -SM_BRIDGE_VPN You are attempting to make a Local Bridge to ""%S"".\r\n\r\nA Local Bridge is made between a Virtual Hub and a physical network adapter in usual usage. It is unusual to make a Local Bridge to a Virtual Network Adapter.\r\nPlease make sure that it is your intention.\r\n\r\nDo you really want to continue? +SM_BRIDGE_VPN You are attempting to make a Local Bridge to "%S".\r\n\r\nA Local Bridge is made between a Virtual Hub and a physical network adapter in usual usage. It is unusual to make a Local Bridge to a Virtual Network Adapter.\r\nPlease make sure that it is your intention.\r\n\r\nDo you really want to continue? SM_BRIDGE_INFO_1 Selecione o dispositivo Ethernet (adaptador de rede) a ser usado como destino da bridge. SM_BRIDGE_INFO_2 Enter a name of the new tap device to create. SM_CONFIG_SAVED The configuration file has been saved. @@ -1526,7 +1525,7 @@ SM_L3_SW_COLUMN4 Routing Tables SM_L3_SW_ST_F_F Parar SM_L3_SW_ST_T_F Iniciar (erro) SM_L3_SW_ST_T_T Iniciar (executando) -SM_L3_SW_DEL_MSG This will delete the Virtual Layer 3 Switch ""%S"". \r\nDo you really want to do this? +SM_L3_SW_DEL_MSG This will delete the Virtual Layer 3 Switch "%S". \r\nDo you really want to do this? SM_L3_SW_IF_COLUMN1 Endereço IP SM_L3_SW_IF_COLUMN2 Máscara de sub-rede SM_L3_SW_IF_COLUMN3 Nome do Hub Virtual @@ -1554,8 +1553,8 @@ SM_READ_LOG_FILE_ERROR Failed to download file SM_READ_SAVE_DLG_TITLE Specify a File Name for the Log File's Save Destination SM_READ_SAVE_DLG_FILTER Log Files (*.LOG)|*.log|All Files (*.*)|*.* SM_READ_SAVE_FAILED Failed to save the log file. -SM_READ_SAVE_TMP_FAILED Unable to write to temporary file ""%S"". -SM_READ_SAVE_OPEN_ERROR Unable to open temporary file ""%S"". \r\n\r\nIt is possible that the .LOG file extension is not an assigned file type in Windows. +SM_READ_SAVE_TMP_FAILED Unable to write to temporary file "%S". +SM_READ_SAVE_OPEN_ERROR Unable to open temporary file "%S". \r\n\r\nIt is possible that the .LOG file extension is not an assigned file type in Windows. SM_LICENSE_COLUMN_1 Número SM_LICENSE_COLUMN_2 Chave de licença SM_LICENSE_COLUMN_3 License Type Name @@ -1609,15 +1608,15 @@ SM_VLAN_COLUMN_4 GUID SM_VLAN_COLUMN_5 Device Instance ID SM_VLAN_YES Ativado SM_VLAN_NO Não ativado -SM_VLAN_MSG_1 The Windows Registry has been configured to allow the network adapter ""%S"" to transmit / receive tagged-VLAN packets.\r\n\r\nHowever, there are some network adapters which requires additional settings on the property of the Device Manager on the local computer's Windows to set the parameters to enable Jumbo Frames. (Ethernet frames which are larger than 1,512 bytes.) Unless you enable Jumbo Frames, some large VLAN packets will be dropped. In the case if large VLAN packets always disappeared, please enable Jumbo Frames. (For example, set the maximum size to 4,088 bytes.) The Device Manager in Windows will help you to configure.\r\n\r\nThis VLAN Transparency Setting has been written to the Windows Registry, however it is not guaranteed that VLAN packets can be transmitted effectively.\r\nIf transmitting VLAN tagged packets will fail after this configuration, refer the manual of the network adapter ""%S"" to configure manually and adequately. Moreover, ""%S"" might not support the VLAN transparency setting. In that case, such a network adapter cannot be used to transmit VLAN frames. Use other products.\r\n\r\nTo apply this setting, Windows which runs VPN Server must be rebooted. Do not forget to reboot it. -SM_VLAN_MSG_2 The Windows Registry parameters which was enabling the VLAN transparency features on the network adapter ""%S"" are deleted from the Registry.\r\n\r\nIf you did a Jumbo Frame enable settings last time, undo such changes manually.\r\n\r\nTo apply this setting, Windows which runs VPN Server must be rebooted. Do not forget to reboot it. -SM_VLAN_NOTHING There are no network adapters which VLAN Transparency Setting Tool supports on the computer ""%S"".\r\n\r\nHowever, some network adapters are capable to transmit VLAN tagged packets by default, or can be configured to perform VLAN tagged packets by specific configuration utility provided by the vendor.\r\nBy using such network adapters, you have to configure such settings by yourself manually. -SM_SERVER_ADMIN_MSG VPN Server / Bridge ""%S"" +SM_VLAN_MSG_1 The Windows Registry has been configured to allow the network adapter "%S" to transmit / receive tagged-VLAN packets.\r\n\r\nHowever, there are some network adapters which requires additional settings on the property of the Device Manager on the local computer's Windows to set the parameters to enable Jumbo Frames. (Ethernet frames which are larger than 1,512 bytes.) Unless you enable Jumbo Frames, some large VLAN packets will be dropped. In the case if large VLAN packets always disappeared, please enable Jumbo Frames. (For example, set the maximum size to 4,088 bytes.) The Device Manager in Windows will help you to configure.\r\n\r\nThis VLAN Transparency Setting has been written to the Windows Registry, however it is not guaranteed that VLAN packets can be transmitted effectively.\r\nIf transmitting VLAN tagged packets will fail after this configuration, refer the manual of the network adapter "%S" to configure manually and adequately. Moreover, "%S" might not support the VLAN transparency setting. In that case, such a network adapter cannot be used to transmit VLAN frames. Use other products.\r\n\r\nTo apply this setting, Windows which runs VPN Server must be rebooted. Do not forget to reboot it. +SM_VLAN_MSG_2 The Windows Registry parameters which was enabling the VLAN transparency features on the network adapter "%S" are deleted from the Registry.\r\n\r\nIf you did a Jumbo Frame enable settings last time, undo such changes manually.\r\n\r\nTo apply this setting, Windows which runs VPN Server must be rebooted. Do not forget to reboot it. +SM_VLAN_NOTHING There are no network adapters which VLAN Transparency Setting Tool supports on the computer "%S".\r\n\r\nHowever, some network adapters are capable to transmit VLAN tagged packets by default, or can be configured to perform VLAN tagged packets by specific configuration utility provided by the vendor.\r\nBy using such network adapters, you have to configure such settings by yourself manually. +SM_SERVER_ADMIN_MSG VPN Server / Bridge "%S" SM_ETHERIP_COLUMN_0 ISAKMP Phase 1 ID SM_ETHERIP_COLUMN_1 Nome do Hub Virtual SM_ETHERIP_COLUMN_2 Nome de usuário SM_ETHERIP_ADD_OK A new EtherIP / L2TPv3 client setting has been registered. -SM_IPSEC_SETUP_QUESTION This VPN Server has a function to accept IPsec / L2TP / EtherIP / L2TPv3 compatible VPN clients or VPN router products.\r\n\r\nYou can allow the VPN Server to accept connections from smartphones such as iPhone, iPad, Android, or standard VPN client functions on Mac OS X or Windows.\r\n\r\nDo you want to set up the IPsec?\r\n(IPsec settings can be configured by clicking ""IPsec / L2TP Settings"" button any time later.) +SM_IPSEC_SETUP_QUESTION This VPN Server has a function to accept IPsec / L2TP / EtherIP / L2TPv3 compatible VPN clients or VPN router products.\r\n\r\nYou can allow the VPN Server to accept connections from smartphones such as iPhone, iPad, Android, or standard VPN client functions on Mac OS X or Windows.\r\n\r\nDo you want to set up the IPsec?\r\n(IPsec settings can be configured by clicking "IPsec / L2TP Settings" button any time later.) SM_OPENVPN_CONFIG_SAVE_OK The ZIP file '%s' which contains the setting files for OpenVPN.\r\n\r\nOpen this ZIP file to extract sample configuration files for OpenVPN which can be used immediately and easily.\r\nYou might be required to revise the configuration file a little.\r\n\r\nFor details please read the 'readme.txt' file in the ZIP file.\r\n\r\nDo you want to open this ZIP file now? SM_OPENVPN_CONFIG_SAVE_NG Failed to save the ZIP file '%s'. SM_OPENVPN_CONFIG_OPEN_NG Failed to open the ZIP file '%s'. Please open this file manually. @@ -1628,17 +1627,17 @@ SM_DDNS_OK_MSG The Dynamic DNS hostname: %S%S\r\n\r\nYou can access to the below SM_DDNS_OK_TITLE Função de DNS dinâmico SM_DDNS_OK_MSG2 The Dynamic DNS hostname has been changed to '%S'.\r\n\r\nClick Hint to read additional information. SM_DDNS_KEY_TITLE Dynamic DNS Key -SM_DDNS_KEY_MSG Your Dynamic DNS Private Key: %s\r\n\r\nThis is the private key which is associated with your current DDNS name. If your VPN Server PC damaged and lost the key, the current DDNS name will be occupied forever and other VPN Server will not be able to use the same name.\r\nIf you want to continue to use the same name, keep the key on a safe place, such as an Internet storage, an another PC or a notepad.\r\nWhen applying the key to the new VPN Server, edit the configuration file of the VPN Server to replace the key by the string in the value following to ""byte Key"" in the ""declare DDnsClient"" directive.\r\nDo not use the duplicated key to two or more VPN Servers at the same time. +SM_DDNS_KEY_MSG Your Dynamic DNS Private Key: %s\r\n\r\nThis is the private key which is associated with your current DDNS name. If your VPN Server PC damaged and lost the key, the current DDNS name will be occupied forever and other VPN Server will not be able to use the same name.\r\nIf you want to continue to use the same name, keep the key on a safe place, such as an Internet storage, an another PC or a notepad.\r\nWhen applying the key to the new VPN Server, edit the configuration file of the VPN Server to replace the key by the string in the value following to "byte Key" in the "declare DDnsClient" directive.\r\nDo not use the duplicated key to two or more VPN Servers at the same time. SM_DDNS_KEY_ERR Failed to read the DNS key. SM_IPSEC_PSK_TOO_LONG The pre-shared key (PSK) has 10 or more letters.\r\n\r\nIt is reported that several versions of Google Android has a serious bug with 10 or more letters pre-shared key.\r\nTherefore 9 or less letters are recommended for pre-shared key.\r\n\r\nDo you want to try another pre-shared key? SM_ADVANCED_REDIRECT_URL_HINT_TITLE How to Use Advanced HTTP Redirection Function -SM_ADVANCED_REDIRECT_URL_HINT Advanced HTTP Redirection (For Experts)\r\n\r\nThe string """" is a place holder. It can embedded on the URL of redirection.\r\n\r\nEmbedded URL Example:\r\nhttp://www.google.com/search?q=|secret\r\n\r\nWhen the client is being redirected, the actual destination URL of redirection will be replaced as follows.\r\n\r\nUsername|Session ID|IP Address|Date and Time|Hash Value\r\n\r\\nAfter Replacement Example: zurukko|SID-ZURUKKO-123|219.117.219.154|20131117100354|99707160AFE7A454042B2C47B064112D652452D7\r\n\r\nThe details of each fields are described as following.\r\n\r\nUsername: The username using for the current VPN Session will be placed.\r\n\r\nSession ID: The Session ID of the VPN Session will be placed.\r\n\r\nDate and Time: 14-digits will be placed as 'YYYYMMDDHHMMSS' format (Time zone is UTC).\r\n\r\nHash Value: A 40-characters hexadecimal strings which represent 20 bytes binary data. The binary data is the result of SHA-1 hash function to the temporary string. The temporary string is the combination of the bit-array of the above fields plus the secret string after the '|' symbol in the redirection URL. (In the above example, ""secret"" is the secret string.) If there are no '|' symbols in the URL, no hash value will be appended.\r\n\r\nThe Purpose of Hash Value: The secret string is effective as the secret key. Thanks to the secret key, the CGI program which receives the query strings on the redirected URL can verify the integrity of the parameters included in the URL.\r\n -SM_ADVANCED_REDIRECT_URL_MSG An URL must start with ""http://"" or ""https://"" +SM_ADVANCED_REDIRECT_URL_HINT Advanced HTTP Redirection (For Experts)\r\n\r\nThe string "" is a place holder. It can embedded on the URL of redirection.\r\n\r\nEmbedded URL Example:\r\nhttp://www.google.com/search?q=|secret\r\n\r\nWhen the client is being redirected, the actual destination URL of redirection will be replaced as follows.\r\n\r\nUsername|Session ID|IP Address|Date and Time|Hash Value\r\n\r\\nAfter Replacement Example: zurukko|SID-ZURUKKO-123|219.117.219.154|20131117100354|99707160AFE7A454042B2C47B064112D652452D7\r\n\r\nThe details of each fields are described as following.\r\n\r\nUsername: The username using for the current VPN Session will be placed.\r\n\r\nSession ID: The Session ID of the VPN Session will be placed.\r\n\r\nDate and Time: 14-digits will be placed as 'YYYYMMDDHHMMSS' format (Time zone is UTC).\r\n\r\nHash Value: A 40-characters hexadecimal strings which represent 20 bytes binary data. The binary data is the result of SHA-1 hash function to the temporary string. The temporary string is the combination of the bit-array of the above fields plus the secret string after the '|' symbol in the redirection URL. (In the above example, "secret" is the secret string.) If there are no '|' symbols in the URL, no hash value will be appended.\r\n\r\nThe Purpose of Hash Value: The secret string is effective as the secret key. Thanks to the secret key, the CGI program which receives the query strings on the redirected URL can verify the integrity of the parameters included in the URL.\r\n +SM_ADVANCED_REDIRECT_URL_MSG An URL must start with "http://" or "https://" SM_DISABLE_DDNS_HINT_CAPTION Disable Dynamic DNS Function -SM_DISABLE_DDNS_HINT To disable the Dynamic DNS Function, modify the configuration file of VPN Server.\r\n\r\nThe ""declare root"" directive has the ""declare DDnsClient"" directive. In this directive, you can switch ""bool Disable"" from false to true, and reboot the VPN Server, then the Dynamic DNS Function will be disabled.\r\n +SM_DISABLE_DDNS_HINT To disable the Dynamic DNS Function, modify the configuration file of VPN Server.\r\n\r\nThe "declare root" directive has the "declare DDnsClient" directive. In this directive, you can switch "bool Disable" from false to true, and reboot the VPN Server, then the Dynamic DNS Function will be disabled.\r\n SM_REGENERATE_CERT_MSG The certificate of VPN Server is being replaced to the new one.\r\n\r\nThis will affect all VPN Clients which are configured to verify the certificate of VPN Server.\r\nDo you want to continue? -SM_DDNS_SERVER_CERT_MSG The DDNS hostname has been changed to ""%S"".\r\n\r\nIf you are planning to use Microsoft SSTP VPN to connect to the VPN Server from Windows Vista or greater versions of Windows with specifying the DDNS hostname as the destination of VPN Server, the destination hostname of the VPN Server must exactly match to the CN (Common Name) field on the certificate of VPN Server due to the security.\r\n\r\nDo you want to regenerate the server certificate in order to match the CN value to ""%S""?\r\n(Click No to keep using the current server certificate.) -SM_DDNS_SERVER_CERT_OK The SSL certificate of VPN Server is now regenerated.\r\n\r\nWhen you make Microsoft SSTP VPN client connects to the VPN Server, you should specify the current DDNS hostname ""%S"" as the destination server hostname.\r\nYou have to also prepare the ""Trusted Root Certificates"" list on the Windows to add the certificate of this VPN Server beforehand.\r\n(To install a root certificate to Windows, open MMC and navigate to ""Local Computer"" in the ""Certificates"" applet. After that, you can import a certificate into the trusted root certification list.\r\n For details refer Microsoft's documents.)\r\n\r\nDo you want to save the new SSL certificate as a file in the X.509 format? +SM_DDNS_SERVER_CERT_MSG The DDNS hostname has been changed to "%S".\r\n\r\nIf you are planning to use Microsoft SSTP VPN to connect to the VPN Server from Windows Vista or greater versions of Windows with specifying the DDNS hostname as the destination of VPN Server, the destination hostname of the VPN Server must exactly match to the CN (Common Name) field on the certificate of VPN Server due to the security.\r\n\r\nDo you want to regenerate the server certificate in order to match the CN value to "%S"?\r\n(Click No to keep using the current server certificate.) +SM_DDNS_SERVER_CERT_OK The SSL certificate of VPN Server is now regenerated.\r\n\r\nWhen you make Microsoft SSTP VPN client connects to the VPN Server, you should specify the current DDNS hostname "%S" as the destination server hostname.\r\nYou have to also prepare the "Trusted Root Certificates" list on the Windows to add the certificate of this VPN Server beforehand.\r\n(To install a root certificate to Windows, open MMC and navigate to "Local Computer" in the "Certificates" applet. After that, you can import a certificate into the trusted root certification list.\r\n For details refer Microsoft's documents.)\r\n\r\nDo you want to save the new SSL certificate as a file in the X.509 format? SM_SETUP_STEP_SECURENAT This VPN Server / Bridge might be running as user-more, or by other limitations, the Virtual Hub and a physical network adapter cannot be bridged together. Instead, the SecureNAT function allows VPN Clients to communicate with other computers in the physical network. The SecureNAT function was enabled by default. You can configure or disable it. SM_SETUP_STEP_SECURENAT_TITLE Step 3. Bridge Virtual Hub and Physical Network SM_UPDATE_CHECK_TITLE_VPNSERVER %S VPN Server (on the host '%S') @@ -1647,10 +1646,10 @@ SM_FACTORY_DEFAULT_WARNING This will perform a factory-reset on the VPN Server / SM_FACTORY_DEFAULT_PERFORMED The factory-reset operation is performing on the server.\r\n\r\nPress OK to exit the current session of VPN Server Manager.\r\nAfter exiting, please re-start the VPN Server Manager and connect to the VPN Server again.\r\nThen you will see the VPN Server is reset. SM_AZURE_STATUS_CONNECTED Status: Conectado SM_AZURE_STATUS_NOT_CONNECTED Status: Desconectado -SM_NO_BRIDGE_NICS No physical network adapters suitable for Local Bridge were found on the VPN server computer.\r\nIn order to create a Local Bridge, you have to install at least one physical network adapters on the computer.\r\nYou cannot use Wi-Fi adapters or 3G adapters for Local Bridge.\r\nPlease install a physical network adapter which is compatible to wired Ethernet.\r\n\r\nIf a recently-installed network adapter doesn't appear, once reboot the computer.\r\n\r\nIf the Local Bridge cannot be used anyway, you can use ""SecureNAT Function"" instead.\r\n\r\nIf you have a certain reason to use unusual network adapters (i.e. Wi-Fi adapters, 3G adapters or virtual adapters), set the ""ShowAllInterfaces"" variable on the ""LocalBridgeList"" directive to ""true"" and restart the VPN Server. Then such devices will appear on the list. (For advanced Windows users only.)\r\n\r\nIf this error occurs after you upgraded Windows, please re-install SoftEther VPN Server or SoftEther VPN Bridge> +SM_NO_BRIDGE_NICS No physical network adapters suitable for Local Bridge were found on the VPN server computer.\r\nIn order to create a Local Bridge, you have to install at least one physical network adapters on the computer.\r\nYou cannot use Wi-Fi adapters or 3G adapters for Local Bridge.\r\nPlease install a physical network adapter which is compatible to wired Ethernet.\r\n\r\nIf a recently-installed network adapter doesn't appear, once reboot the computer.\r\n\r\nIf the Local Bridge cannot be used anyway, you can use "SecureNAT Function" instead.\r\n\r\nIf you have a certain reason to use unusual network adapters (i.e. Wi-Fi adapters, 3G adapters or virtual adapters), set the "ShowAllInterfaces" variable on the "LocalBridgeList" directive to "true" and restart the VPN Server. Then such devices will appear on the list. (For advanced Windows users only.)\r\n\r\nIf this error occurs after you upgraded Windows, please re-install SoftEther VPN Server or SoftEther VPN Bridge> SM_CERT_MESSAGE The current SSL self-signed root certificate on this VPN Server is in the old format.\r\n\r\nSome versions of OpenVPN Connect for Android have a bug to misinterpret SSL certificates in the old format. It might cause the connection problem from OpenVPN Connect for Android to this VPN Server.\r\n\r\nIf you are planning to use OpenVPN Connect for Android as a VPN client, it is recommended to regenerate the SSL server certificate.\r\n\r\nDo you want to regenerate the server certificate now? SM_CERT_MESSAGE_CLI --- Caution ---\r\n\r\nThe current SSL self-signed root certificate on this VPN Server is in the old format.\r\n\r\nSome versions of OpenVPN Connect for Android have a bug to misinterpret SSL certificates in the old format. It might cause the connection problem from OpenVPN Connect for Android to this VPN Server.\r\n\r\nIf you are planning to use OpenVPN Connect for Android as a VPN client, it is recommended to regenerate the SSL server certificate.\r\n\r\nTo regenerate and update the server certificate, execute the "ServerCertRegenerate" command after updating the VPN Server to the latest version. -SM_CERT_NEED_ROOT The specified SSL certificate is a sub-certificate which was issued by a CA (Certificate Authority).\r\n\r\nIf you are planning to support either Microsoft SSTP or OpenVPN protocol on this VPN server, you have to install the root certificate and all intermediate certificates (if exists) on this VPN Server.\r\n\r\nTo install these certificates, copy the root certificate and all intermediate certificate files (in the X.509 format) into the ""chain_certs"" subdirectory on the directory which is VPN Server has been installed on.\r\n\r\nIf you don't know how to obtain root and intermediate certificate files for your certificate authority (CA), please refer to the CA's web site or contact technical support staffs of the CA. +SM_CERT_NEED_ROOT The specified SSL certificate is a sub-certificate which was issued by a CA (Certificate Authority).\r\n\r\nIf you are planning to support either Microsoft SSTP or OpenVPN protocol on this VPN server, you have to install the root certificate and all intermediate certificates (if exists) on this VPN Server.\r\n\r\nTo install these certificates, copy the root certificate and all intermediate certificate files (in the X.509 format) into the "chain_certs" subdirectory on the directory which is VPN Server has been installed on.\r\n\r\nIf you don't know how to obtain root and intermediate certificate files for your certificate authority (CA), please refer to the CA's web site or contact technical support staffs of the CA. # Concerning User-mode Router Administration Tools @@ -1659,7 +1658,7 @@ NM_CONNECT_TITLE excluído NM_STATUS_TAG Connection status: %s NM_OFFLINE You are not connected to any VPN Servers. NM_CONNECTING Connecting to VPN Server -NM_CONNECTED Connected to VPN Server ""%S"" +NM_CONNECTED Connected to VPN Server "%S" NM_CONNECT_ERROR Error number %u (%s) NM_ACCOUNT_TITLE excluído NM_STATUS User-mode Router Status @@ -1735,7 +1734,7 @@ LS_STOP_FARM_MEMBER_2 Connection with the cluster controller has been disconnect LS_STOP_FARM_CONTROL Cluster controller is stopping. LS_STOP_FARM_CONTROL_2 Cluster controller has stopped. LS_ENUM_ETHERNET_1 Ethernet device has been enumerated. -LS_ENUM_ETHERNET_2 Device %u: ""%S"" +LS_ENUM_ETHERNET_2 Device %u: "%S" LS_LOAD_CONFIG_1 Loading the configuration file. LS_LOAD_CONFIG_2 The configuration file has been loaded. LS_LOAD_CONFIG_3 Configuration file does not exist. Attempting to start using initial settings. @@ -1744,45 +1743,45 @@ LS_BAD_CONFIG The contents of the configuration file is invalid. The loading pro LS_LISTENER_START_1 TCP Listener (port %u) is starting. LS_LISTENER_START_2 TCP Listener (port %u) has started. Now listening for connection from client. LS_LISTENER_START_3 Unable to set port to Listen status for TCP Listener (port %u). Attempting at fixed intervals until successful. -LS_LISTENER_ACCEPT On the TCP Listener (Port %u), a Client (IP address %S, Host name ""%S"", Port number %u) has connected. +LS_LISTENER_ACCEPT On the TCP Listener (Port %u), a Client (IP address %S, Host name "%S", Port number %u) has connected. LS_LISTENER_DISCONNECT The connection with the client (IP address %S, Port number %u) has been disconnected. LS_LISTENER_DOS A DoS attack on the TCP Listener (port %u) has been detected. The connecting source IP address is %S, port number is %u. This connection will be forcefully disconnected now. LS_LISTENER_MAXUEC The TCP listener is temporary suspending to accept new inward connections because of the number of pending TCP connections exceeded %u. (Current value = %u) LS_LISTENER_STOP_1 TCP Listener (port %u) is stopping. LS_LISTENER_STOP_2 TCP Listener (port %u) has stopped. -LS_HUB_START Virtual Hub ""%S"" has been started. -LS_HUB_STOP Virtual Hub ""%S"" has been stopped. -LS_HUB_MAC The MAC address of Virtual Hub ""%S"" is ""%S"". -LS_NODE_INFO_TAG Client product name: ""%S"", Client version: %u, Client build number: %u, Server product name: ""%S"", Server version: %u, Server build number: %u, Client OS name: ""%S"", Client OS version: ""%S"", Client product ID: ""%S"", Client host name: ""%S"", Client IP address: ""%S"", Client port number: %u, Server host name: ""%S"", Server IP address: ""%S"", Server port number: %u, Proxy host name: ""%S"", Proxy IP address: ""%S"", Proxy port number: %u, Virtual Hub name: ""%S"", Client unique ID: ""%S"" -LS_CONNECTION_START_1 For the client (IP address: %S, host name: ""%S"", port number: %u), connection ""%S"" has been created. -LS_CONNECTION_END_1 Connection ""%S"" has been terminated. -LS_SSL_START SSL communication for connection ""%S"" has been started. The encryption algorithm name is ""%S"". -LS_CONNECTION_ERROR Connection ""%S"" terminated by the cause ""%s"" (code %u). -LS_FARMMEMBER_NOT_ADMIN Connection ""%S"": Although the server is a cluster member, the client attempted that to directly connect to the Virtual Hub ""%S"" while not being administrator user ""%S"". The user name provided by the client is ""%S"". Access is refused. -LS_HUB_NOT_FOUND Connection ""%S"": Virtual Hub ""%S"" that the client is trying to connect to does not exist on the server. -LS_IP_DENIED Connection ""%S"": The source IP address ""%S"" of the client has refused based on the Source IP Address Limit List defined for the Virtual Hub. -LS_LICENSE_ERROR Connection ""%S"": Because a license-related error has been occurred, the client is unable to connect to the server. +LS_HUB_START Virtual Hub "%S" has been started. +LS_HUB_STOP Virtual Hub "%S" has been stopped. +LS_HUB_MAC The MAC address of Virtual Hub "%S" is "%S". +LS_NODE_INFO_TAG Client product name: "%S", Client version: %u, Client build number: %u, Server product name: "%S", Server version: %u, Server build number: %u, Client OS name: "%S", Client OS version: "%S", Client product ID: "%S", Client host name: "%S", Client IP address: "%S", Client port number: %u, Server host name: "%S", Server IP address: "%S", Server port number: %u, Proxy host name: "%S", Proxy IP address: "%S", Proxy port number: %u, Virtual Hub name: "%S", Client unique ID: "%S" +LS_CONNECTION_START_1 For the client (IP address: %S, host name: "%S", port number: %u), connection "%S" has been created. +LS_CONNECTION_END_1 Connection "%S" has been terminated. +LS_SSL_START SSL communication for connection "%S" has been started. The encryption algorithm name is "%S". +LS_CONNECTION_ERROR Connection "%S" terminated by the cause "%s" (code %u). +LS_FARMMEMBER_NOT_ADMIN Connection "%S": Although the server is a cluster member, the client attempted that to directly connect to the Virtual Hub "%S" while not being administrator user "%S". The user name provided by the client is "%S". Access is refused. +LS_HUB_NOT_FOUND Connection "%S": Virtual Hub "%S" that the client is trying to connect to does not exist on the server. +LS_IP_DENIED Connection "%S": The source IP address "%S" of the client has refused based on the Source IP Address Limit List defined for the Virtual Hub. +LS_LICENSE_ERROR Connection "%S": Because a license-related error has been occurred, the client is unable to connect to the server. LS_BETA_EXPIRES This beta version of SoftEther VPN Server is expired. The beta version period of use has expired. Download a new beta version or full version from http://selinks.org/. -LS_TICKET_1 A new client authentication ticket has been issued for cluster member ""%S"". Virtual Hub ""%S"", User name ""%S"" (""%S""), Session name ""%S"", Ticket ""%S"" -LS_TICKET_2 A new client authentication ticket has been received from the cluster controller. Virtual Hub ""%S"", User name ""%S"" (""%S""), Session name ""%S"", Ticket ""%S"", Expiration %u seconds -LS_ENUM_HUB Connection ""%S"": %u Virtual Hub servers have been enumerated on this server. -LS_FARM_ACCEPT_1 Connection ""%S"": Although this server received a cluster control connection request, this server is not a cluster controller. -LS_FARM_ACCEPT_2 Connection ""%S"":Although this server received a cluster control connection request, the authentication password is incorrect and connection has been refused. -LS_FARM_ACCEPT_3 Connection ""%S"": This server received a cluster control connection request. Authentication has been successful. -LS_FARM_SERV_START Connection with a cluster member has been established. IP address: %S, Host name: ""%S"" -LS_FARM_SERV_END Connection with cluster member ""%S"" has been deleted. -LS_FARM_CONNECT_1 Connection to cluster controller ""%S"" has started. -LS_FARM_CONNECT_2 Connection to cluster controller ""%S"" has been refused. Error: %s (code %u) -LS_FARM_CONNECT_3 TCP connection to cluster controller ""%S"" failed. Continuing to attempt connection in intervals of %u seconds until connection is successful. +LS_TICKET_1 A new client authentication ticket has been issued for cluster member "%S". Virtual Hub "%S", User name "%S" ("%S"), Session name "%S", Ticket "%S" +LS_TICKET_2 A new client authentication ticket has been received from the cluster controller. Virtual Hub "%S", User name "%S" ("%S"), Session name "%S", Ticket "%S", Expiration %u seconds +LS_ENUM_HUB Connection "%S": %u Virtual Hub servers have been enumerated on this server. +LS_FARM_ACCEPT_1 Connection "%S": Although this server received a cluster control connection request, this server is not a cluster controller. +LS_FARM_ACCEPT_2 Connection "%S":Although this server received a cluster control connection request, the authentication password is incorrect and connection has been refused. +LS_FARM_ACCEPT_3 Connection "%S": This server received a cluster control connection request. Authentication has been successful. +LS_FARM_SERV_START Connection with a cluster member has been established. IP address: %S, Host name: "%S" +LS_FARM_SERV_END Connection with cluster member "%S" has been deleted. +LS_FARM_CONNECT_1 Connection to cluster controller "%S" has started. +LS_FARM_CONNECT_2 Connection to cluster controller "%S" has been refused. Error: %s (code %u) +LS_FARM_CONNECT_3 TCP connection to cluster controller "%S" failed. Continuing to attempt connection in intervals of %u seconds until connection is successful. LS_FARM_DISCONNECT Connection to the cluster controller has stopped. LS_FARM_START Connected to cluster controller. Operation as cluster member is starting. -LS_LICENSE_NOT_VPNSERVER Connection ""%S"": License error occurred. The VPN Client attempted to connect while the VPN Server product license is not yet registered. -LS_LICENSE_NOT_VPNCLUSTER Connection ""%S"": License error occurred. The license registered on this VPN Server is of a type that prevents the use of the current clustering function and a VPN Client has attempted connection while operating in Cluster mode. You must restart the VPN Server. -LS_LICENSE_VIOLATION Connection ""%S"": A license violation has occurred on the VPN Server and connections are not being received. -LS_LICENSE_VIOLATION_DETECTED A license violation has been detected. A different VPN Server is operating with the same server ID ""%I64u"" as this VPN Server. It is possible that there are two or more VPN Servers in the cluster that are using the same license. Check the license information of each VPN Server. -LS_API_AUTH_OK HTTPS API client ""%r:%u"" (%S): Administration mode: ""%S"": The embedded HTTPS web server accepted the successful login. Username: ""%S"", Method: ""%S"", Path: ""%S"" -LS_API_AUTH_ERROR HTTPS API client ""%r:%u"" (%S): The embedded HTTPS web server refused a login attempt. Username: ""%S"", Method: ""%S"", Path: ""%S"" -LS_API_RPC_CALL HTTPS API client ""%r:%u"" (%S): The client called a JSON-API. Method: ""%S"", Returned error code: %u (0 = success), Returned error message: ""%s"" +LS_LICENSE_NOT_VPNSERVER Connection "%S": License error occurred. The VPN Client attempted to connect while the VPN Server product license is not yet registered. +LS_LICENSE_NOT_VPNCLUSTER Connection "%S": License error occurred. The license registered on this VPN Server is of a type that prevents the use of the current clustering function and a VPN Client has attempted connection while operating in Cluster mode. You must restart the VPN Server. +LS_LICENSE_VIOLATION Connection "%S": A license violation has occurred on the VPN Server and connections are not being received. +LS_LICENSE_VIOLATION_DETECTED A license violation has been detected. A different VPN Server is operating with the same server ID "%I64u" as this VPN Server. It is possible that there are two or more VPN Servers in the cluster that are using the same license. Check the license information of each VPN Server. +LS_API_AUTH_OK HTTPS API client "%r:%u" (%S): Administration mode: "%S": The embedded HTTPS web server accepted the successful login. Username: "%S", Method: "%S", Path: "%S" +LS_API_AUTH_ERROR HTTPS API client "%r:%u" (%S): The embedded HTTPS web server refused a login attempt. Username: "%S", Method: "%S", Path: "%S" +LS_API_RPC_CALL HTTPS API client "%r:%u" (%S): The client called a JSON-API. Method: "%S", Returned error code: %u (0 = success), Returned error message: "%s" # (OpenVPN Logs) @@ -1791,15 +1790,15 @@ LO_PREFIX_SESSION OpenVPN Session %u (%r:%u -> %r:%u): LO_PREFIX_CHANNEL OpenVPN Session %u (%r:%u -> %r:%u) Channel %u: LO_NEW_CHANNEL A new channel is created. LO_CHANNEL_ESTABLISHED_NEWKEY The channel is established. (Trigger: Re-key completion.) -LO_OPTION_STR_RECV Option Strings Received: ""%S"" -LO_CLIENT_CERT Client certificate received (subject: CN=""%s""), will use certificate authentication. -LO_CLIENT_UNVERIFIED_CERT Client certificate was provided but did not pass verification (error=""%S""), will use password authentication. +LO_OPTION_STR_RECV Option Strings Received: "%S" +LO_CLIENT_CERT Client certificate received (subject: CN="%s"), will use certificate authentication. +LO_CLIENT_UNVERIFIED_CERT Client certificate was provided but did not pass verification (error="%S"), will use password authentication. LO_CLIENT_NO_CERT Client certificate is not provided, will use password authentication. -LO_OPTION_STR_SEND Option Strings to Send: ""%S"" +LO_OPTION_STR_SEND Option Strings to Send: "%S" LO_NEW_SESSION A new session is created. Protocol: %S LO_INITIATE_REKEY The re-keying process is started. LO_CHANNEL_ESTABLISHED The channel becomes the established state. -LO_PUSH_REPLY The full strings replied: ""%S"" +LO_PUSH_REPLY The full strings replied: "%S" LO_CHANNEL_FAILED Failed to connect a channel. LO_CHANNEL_DISCONNECTED_BY_HUB This OpenVPN channel is being terminated because the administrator of the Virtual Hub has disconnected this the VPN Session. LO_DELETE_SESSION Deleting the session. @@ -1839,7 +1838,7 @@ LI_IKE_SA_ESTABLISHED This IKE SA is established between the server and the clie LI_IPSEC_NO_TRANSFORM There are no acceptable transform proposals from the client for establishing an IPsec SA. LI_IKE_NO_TRANSFORM There are no acceptable transform proposals from the client for establishing an IKE SA. LI_IKE_NO_NAT_T The connection cannot be accepted because this VPN client is not compatible with IPsec NAT Traversal (RFC 3947 Negotiation of NAT-Traversal in the IKE or draft-ietf-ipsec-nat-t-ike). -LI_SET_CLIENT_ID The client ID which this client presented in the establishing phase is ""%S"". +LI_SET_CLIENT_ID The client ID which this client presented in the establishing phase is "%S". LI_CLIENT_MERGE This client (Client %u) and the other client (Client %u) is the same client. So they are merged to the client %u. LI_CLIENT_UPDATE The port number information of this client is updated. @@ -1848,19 +1847,19 @@ LI_CLIENT_UPDATE The port number information of this client is updated. LE_PREFIX EtherIP / L2TPv3 Session %u (%S:%u -> %S:%u): LE_START_MODULE The EtherIP / L2TPv3 Module is started. LE_STOP The EtherIP / L2TPv3 Module is stopped. -LE_NO_SETTING Error: No EtherIP / L2TPv3 setting entries for the Client ID ""%S"" is registered on the VPN Server. Please register an entry of a EtherIP / L2TPv3 setting on the VPN Server beforehand. -LE_START_IPC The internal pipe was created between the EtherIP / L2TPv3 module to the Virtual Hub ""%S"". The using username is ""%S"". The IPv4 TCP MSS (Max Segment Size) to be set is %u bytes. -LE_IPC_CONNECT_ERROR The connection from the EtherIP / L2TPv3 module to the Virtual Hub ""%S"" failed. Error: %u : %s -LE_IPC_CONNECT_OK The connection from the EtherIP / L2TPv3 module to the Virtual Hub ""%S"" succeeded. +LE_NO_SETTING Error: No EtherIP / L2TPv3 setting entries for the Client ID "%S" is registered on the VPN Server. Please register an entry of a EtherIP / L2TPv3 setting on the VPN Server beforehand. +LE_START_IPC The internal pipe was created between the EtherIP / L2TPv3 module to the Virtual Hub "%S". The using username is "%S". The IPv4 TCP MSS (Max Segment Size) to be set is %u bytes. +LE_IPC_CONNECT_ERROR The connection from the EtherIP / L2TPv3 module to the Virtual Hub "%S" failed. Error: %u : %s +LE_IPC_CONNECT_OK The connection from the EtherIP / L2TPv3 module to the Virtual Hub "%S" succeeded. LE_RECONNECT Settings of EtherIP / L2TPv3 has been changed. Internal pipes is now being deleted and auto-reconnecting. # (PPP Log) LP_PREFIX %S%SPPP Session [%S:%u]: -LP_CONNECTED A new PPP session (Upper protocol: %S) is started. IP Address of PPP Client: %S (Hostname: ""%S""), Port Number of PPP Client: %u, IP Address of PPP Server: %S, Port Number of PPP Server: %u, Client Software Name: ""%S"", IPv4 TCP MSS (Max Segment Size): %u bytes +LP_CONNECTED A new PPP session (Upper protocol: %S) is started. IP Address of PPP Client: %S (Hostname: "%S"), Port Number of PPP Client: %u, IP Address of PPP Server: %S, Port Number of PPP Server: %u, Client Software Name: "%S", IPv4 TCP MSS (Max Segment Size): %u bytes LP_DISCONNECTED The PPP session is disconnected. -LP_PAP_REJECTED The client denied to accept the authentication protocol ""PAP"" (Password Authentication Protocol, a clear-text password authentication protocol). Enable PAP on the client-side and retry. -LP_PAP_MSCHAPV2_REJECTED The client denied to accept both the ""PAP"" (Password Authentication Protocol, a clear-text password authentication protocol) and MS-CHAP v2 Protocol. Enable either PAP or MS-CHAP v2 on the client-side and retry. +LP_PAP_REJECTED The client denied to accept the authentication protocol "PAP" (Password Authentication Protocol, a clear-text password authentication protocol). Enable PAP on the client-side and retry. +LP_PAP_MSCHAPV2_REJECTED The client denied to accept both the "PAP" (Password Authentication Protocol, a clear-text password authentication protocol) and MS-CHAP v2 Protocol. Enable either PAP or MS-CHAP v2 on the client-side and retry. LP_DISCONNECTED_ABNORMAL A PPP protocol error occurred, or the PPP session has been disconnected. LP_NEXT_PROTOCOL_IS_NOT_PAP An invalid protocol (Protocol Number: 0x%x) with non-PAP (Password Authentication Protocol) control packet. LP_PAP_FAILED "PAP" (Password Authentication Protocol, a clear-text password authentication protocol) user authentication failed. @@ -1869,14 +1868,14 @@ LP_NEXT_PROTOCOL_IS_NOT_IPCP An invalid protocol (Protocol Number: 0x%x) with no LP_DATA_TIMEOUT A timeout on the PPP data transmitting occurred. The PPP client might be disconnected from the network. LP_CONTROL_TIMEOUT A timeout on the PPP control transmitting occurred. No responses from the PPP client. LP_VPN_SESSION_TERMINATED The PPP session is disconnected because the VPN Session has been disconnected by the administrator. -LP_UPPER_PROTOCOL_DISCONNECTED The PPP session is disconnected because the upper-layer protocol ""%S"" has been disconnected. +LP_UPPER_PROTOCOL_DISCONNECTED The PPP session is disconnected because the upper-layer protocol "%S" has been disconnected. LP_NORMAL_TERMINATE The PPP session is disconnected by the VPN Client's disconnecting request. LP_IP_ADDRESS_NOT_DETERMIND The VPN Client sent a packet though an IP address of the VPN Client hasn't been determined. LP_DHCP_REQUEST_TRYING Trying to request an IP address from the DHCP server. -LP_DHCP_REQUEST_OK An IP address is assigned. IP Address of Client: %S, Subnet Mask: %S, Default Gateway: %S, Domain Name: ""%S"", DNS Server 1: %S, DNS Server 2: %S, WINS Server 1: %S, WINS Server 2: %S, IP Address of DHCP Server: %S, Lease Lifetime: %u seconds +LP_DHCP_REQUEST_OK An IP address is assigned. IP Address of Client: %S, Subnet Mask: %S, Default Gateway: %S, Domain Name: "%S", DNS Server 1: %S, DNS Server 2: %S, WINS Server 1: %S, WINS Server 2: %S, IP Address of DHCP Server: %S, Lease Lifetime: %u seconds LP_DHCP_REQUEST_NG Acquiring an IP address from the DHCP server failed. To accept a PPP session, you need to have a DHCP server. Make sure that a DHCP server is working normally in the Ethernet segment which the Virtual Hub belongs to. If you do not have a DHCP server, you can use the Virtual DHCP function of the SecureNAT on the Virtual Hub instead. LP_DHCP_INFORM_TRYING Acquiring the IP networking information such as subnet mask and the default gateway information from the DHCP server. -LP_DHCP_INFORM_OK The networking information has been acquired. Subnet Mask: %S, Default Gateway: %S, Domain Name: ""%S"", DNS Server 1: %S, DNS Server 2: %S, WINS Server 1: %S, WINS Server 2: %S, IP Address of DHCP Server: %S +LP_DHCP_INFORM_OK The networking information has been acquired. Subnet Mask: %S, Default Gateway: %S, Domain Name: "%S", DNS Server 1: %S, DNS Server 2: %S, WINS Server 1: %S, WINS Server 2: %S, IP Address of DHCP Server: %S LP_DHCP_INFORM_NG Acquiring the networking information from the DHCP server failed. To accept a PPP session, you need to have a DHCP server. Make sure that a DHCP server is working normally in the Ethernet segment which the Virtual Hub belongs to. If you do not have a DHCP server, you can use the Virtual DHCP function of the SecureNAT on the Virtual Hub instead. LP_SET_IPV4_PARAM The IP address and other network information parameters are set successfully. IP Address of Client: %S, Subnet Mask: %S, Default Gateway: %S, DNS Server 1: %S, DNS Server 2: %S, WINS Server 1: %S, WINS Server 2: %S @@ -1884,7 +1883,7 @@ LP_SET_IPV4_PARAM The IP address and other network information parameters are se # (Virtual Hub log) LH_ONLINE O hub virtual está online agora. LH_OFFLINE O hub virtual está offline agora. -LH_CONNECT_CLIENT The connection ""%S"" (IP address: %S, Host name: %S, Port number: %u, Client name: ""%S"", Version: %S, Build: %u) is attempting to connect to the Virtual Hub. The auth type provided is ""%s"" and the user name is ""%S"". +LH_CONNECT_CLIENT The connection "%S" (IP address: %S, Host name: %S, Port number: %u, Client name: "%S", Version: %S, Build: %u) is attempting to connect to the Virtual Hub. The auth type provided is "%s" and the user name is "%S". LH_AUTH_UNKNOWN Unknown auth type. LH_AUTH_ANONYMOUS Anonymous authentication LH_AUTH_PASSWORD Password authentication @@ -1892,91 +1891,91 @@ LH_AUTH_PLAIN_PASSWORD External server authentication LH_AUTH_CERT Certificate authentication LH_AUTH_TICKET Ticket authentication LH_AUTH_OPENVPN_CERT OpenVPN certificate authentication -LH_AUTH_RADIUS_NOT_SUPPORT Connection ""%S"": The authentication method of the user ""%S"" has been specified as RADIUS Authentication or Active Directory Authentication (NT Domain Authentication). However, the edition of the VPN Server is ""%S"". This edition does not support RADIUS Authentication nor Active Directory Authentication (NT Domain Authentication). The connection will be denied. -LH_AUTH_RADIUS_NOT_SUPPORT_ON_OPEN_SOURCE Connection ""%S"": The authentication method of the user ""%S"" has been specified as RADIUS Authentication or Active Directory Authentication (NT Domain Authentication). However, such an external user-authentication function hasn't been implemented on the Open-Source version of SoftEther VPN yet. The connection will be denied. -LH_AUTH_CERT_NOT_SUPPORT_ON_OPEN_SOURCE Connection ""%S"": The authentication method of the user ""%S"" has been specified as Certificate Authentication. However, the Certificate Authentication function hasn't been implemented on the Open-Source version of SoftEther VPN yet. The connection will be denied. -LH_AUTH_OK Connection ""%S"": Successfully authenticated as user ""%S"". -LH_AUTH_OK_CERT The Virtual Hub's Security Account Manager has received the following certificate from the VPN Client and accepted its contents as the certificate for when user ""%S"" logs in: %s -LH_AUTH_NG_CERT Although the Virtual Hub's Security Account Manager has received the following certificate, has refused its contents as the certificate for when user ""%S"" logs in because this certificate's contents matches the contents that are registered in the Virtual Hub's certificates revocation list: %s -LH_AUTH_NG Connection ""%S"": User authentication failed. The user name that has been provided was ""%S"". -LH_LOCAL_ONLY Connection ""%S"": The remote login has been refused because of the password for user ""%S"" is blank. -LH_POLICY_ACCESS_NG Connection ""%S"": Access has beens refused to user ""%S"" based on the security policy. -LH_USER_EXPIRES Connection ""%S"": Access has been refused to user ""%S"" because of the expiration date has been expired. -LH_CLIENT_VERSION_OLD Connection ""%S"": The build number of the VPN Client is %u. Only the build %u or latest version of VPN Client is granted to access the VPN Server. -LH_CLIENT_ID_REQUIRED Connection ""%S"": The Client ID which has been specified by the VPN Client is %u. However, this Virtual Hub has the RequiredClientId value set to %u. -LH_FARM_SELECT_1 Connection ""%S"": The cluster controller is deciding the destination cluster member of this client. -LH_FARM_SELECT_2 Connection ""%S"": Failed to decide the destination cluster member server. -LH_FARM_SELECT_3 Connection ""%S"": This current VPN Server has been decided as the destination cluster member server. Proceeding to receive connection. -LH_FARM_SELECT_4 Connection ""%S"": The server ""%S"" has been decided as a destination cluster member server. Instructing clients to redirect connection to this server. -LH_MAX_SESSION Connection ""%S"": The maximum number of sessions (%u) that can be set by the Virtual Hub has been reached. Unable to create a new session. -LH_MAX_SESSION_CLIENT Connection ""%S"": The maximum number of client sessions (%u) that can be set by the Virtual Hub has been reached. Unable to create a new session. -LH_MAX_SESSION_BRIDGE Connection ""%S"": The maximum number of bridge sessions (%u) that can be set by the Virtual Hub has been reached. Unable to create a new session. -LH_MAX_SESSION_2 Connection ""%S"": The maximum number of sessions (%u) that can be managed by a VPN Server has been reached. Unable to create a new session. -LH_NEW_SESSION Connection ""%S"": The new session ""%S"" has been created. (IP address: %S, Port number: %u, Physical underlying protocol: ""%S"") -LH_SET_SESSION Session ""%S"": The parameter has been set. Max number of TCP connections: %u, Use of encryption: %s, Use of compression: %s, Use of Half duplex communication: %s, Timeout: %u seconds. -LH_NODE_INFO Session ""%S"": VPN Client details: (%s) -LH_VLAN_ID Session ""%S"": Assigned VLAN ID: %u -LH_INVALID_SIGNATURE Session ""%S"": The connected client sent invalid protocol data. Unable to establish normal communication with client. First check for problems with the connections and cabling of the network connecting the client and the server and then check there is not a special transparent packet re-writing device installed. -LH_END_SESSION Session ""%S"": The session has been terminated. The statistical information is as follows: Total outgoing data size: %I64u bytes, Total incoming data size: %I64u bytes. -LH_BCAST_STORM Session ""%S"": A large volume of broadcast packets has been detected. There are cases where packets are discarded based on the policy. The source MAC address is %S, the source IP address is %S, the destination IP address is %S. The number of broadcast packets is equal to or larger than %u items per 1 second (note this information is the result of mechanical analysis of part of the packets and could be incorrect). -LH_DHCP_FORCE Session ""%S"": The packet was discarded because it has been attempting to use the IP address %S, which is not a DHCP server allocated IP address. -LH_MAC_LIMIT Session ""%S"": Although the virtual hub has attempt to assign a new MAC address ""%S"" was made, %u MAC addresses have already been assigned for this service. According to the security policy, this session is allowed to have a maximum of %u MAC addresses. The packet has been discarded. -LH_BRIDGE_LIMIT Session ""%S"": Although the virtual hub has attempt to assign a new MAC address ""%S"" was made, %u MAC addresses have already been assigned for this service. According to the security policy, this session is denied bridges and is therefore allowed to hold no more than %u MAC addresses. The packet has been discarded. -LH_MAC_REGIST Session ""%S"": A new MAC address ""%S"" has been assigned. -LH_MAC_REGIST_VLAN Session ""%S"": A new MAC address ""%S"" (VLAN ID: %u) has been assigned. -LH_IP_LIMIT Session ""%S"": Although the virtual hub has attempt to assign a new IP address %S was made, %u IP addresses have already been assigned for this service. According to the security policy, this session is allowed to have a maximum of %u IP addresses. The packet has been discarded. -LH_ROUTING_LIMIT Session ""%S"": Although the virtual hub has attempt to assign a new IP address %S was made, %u IP addresses have already been assigned for this service. According to the security policy, this session is denied routing and is therefore allowed to hold no more than %u IP addresses. The packet has been discarded. -LH_IP_CONFLICT Session ""%S"": Although the virtual hub has attempt to use the IP address %S was made, this IP address is already being used by another session ""%S"" (MAC Address: ""%S""). The security policy for this session denies duplication of IP addresses that are used by other sessions. The packet has been discarded. Detailed Information: CreatedTime=%I64u, UpdatedTime=%I64u, DhcpAllocated=%u, Now=%I64u -LH_NO_SERVER Session ""%S"": Although TCP/IP connection request (from %S:%u to %S:%u) was made to this session, because of the security policy denies operation as a server, the packet has been discarded. -LH_NO_DHCP Session ""%S"": Although host %S on this session sent a packet that allocates an IP address as a DHCP server for host %S on another session, this session's security policy denies operation as a DHCP server. The packet has been discarded. -LH_REGIST_DHCP Session ""%S"": The DHCP server of host ""%S"" (%S) on this session allocated, for host ""%S"" on another session ""%S"", the new IP address %S. -LH_BRIDGE_1 Session ""%S"": A Local Bridge connection to physical Ethernet interface ""%S"" was started. -LH_BRIDGE_2 Session ""%S"": Because communication has failed to be established with physical Ethernet interface ""%S"", the Local Bridge has stopped. -LH_SET_MTU Session ""%S"": The physical Ethernet interface ""%S"" has an MTU value set to %u. It is necessary to send and receive an Ethernet packet which has %u bytes. The MTU is now changed to %u. -LH_SET_MTU_ERROR Session ""%S"": The physical Ethernet interface ""%S"" has an MTU value set to %u. It is necessary to send and receive an Ethernet packet which has %u bytes. However, changing the MTU to %u failed. This physical Ethernet interface or device driver might be unable to process an Ethernet packet which has more 1,514 bytes (payload size: 1,500 bytes). In such case, the larger tagged-VLAN packets than 1,514 bytes cannot be transmitted. You should replace the current physical Ethernet adapter to another which supports Jumbo Frames. You can also try to update the device driver. Another possible method is to enable Jumbo Frames on the operating system or device driver settings. -LH_START_BRIDGE The Local Bridge connection ""%S"" has started. The bridge session ""%S"" was created. -LH_STOP_BRIDGE The Local Bridge connection ""%S"" has stopped. -LH_LINK_START The Cascade Connection ""%s"" has been established. The Cascade session ""%S"" was created. -LH_LINK_STOP The Cascade Connection ""%s"" has stopped. -LH_NAT_START SecureNAT has started. The SecureNAT session ""%S"" was created. +LH_AUTH_RADIUS_NOT_SUPPORT Connection "%S": The authentication method of the user "%S" has been specified as RADIUS Authentication or Active Directory Authentication (NT Domain Authentication). However, the edition of the VPN Server is "%S". This edition does not support RADIUS Authentication nor Active Directory Authentication (NT Domain Authentication). The connection will be denied. +LH_AUTH_RADIUS_NOT_SUPPORT_ON_OPEN_SOURCE Connection "%S": The authentication method of the user "%S" has been specified as RADIUS Authentication or Active Directory Authentication (NT Domain Authentication). However, such an external user-authentication function hasn't been implemented on the Open-Source version of SoftEther VPN yet. The connection will be denied. +LH_AUTH_CERT_NOT_SUPPORT_ON_OPEN_SOURCE Connection "%S": The authentication method of the user "%S" has been specified as Certificate Authentication. However, the Certificate Authentication function hasn't been implemented on the Open-Source version of SoftEther VPN yet. The connection will be denied. +LH_AUTH_OK Connection "%S": Successfully authenticated as user "%S". +LH_AUTH_OK_CERT The Virtual Hub's Security Account Manager has received the following certificate from the VPN Client and accepted its contents as the certificate for when user "%S" logs in: %s +LH_AUTH_NG_CERT Although the Virtual Hub's Security Account Manager has received the following certificate, has refused its contents as the certificate for when user "%S" logs in because this certificate's contents matches the contents that are registered in the Virtual Hub's certificates revocation list: %s +LH_AUTH_NG Connection "%S": User authentication failed. The user name that has been provided was "%S". +LH_LOCAL_ONLY Connection "%S": The remote login has been refused because of the password for user "%S" is blank. +LH_POLICY_ACCESS_NG Connection "%S": Access has beens refused to user "%S" based on the security policy. +LH_USER_EXPIRES Connection "%S": Access has been refused to user "%S" because of the expiration date has been expired. +LH_CLIENT_VERSION_OLD Connection "%S": The build number of the VPN Client is %u. Only the build %u or latest version of VPN Client is granted to access the VPN Server. +LH_CLIENT_ID_REQUIRED Connection "%S": The Client ID which has been specified by the VPN Client is %u. However, this Virtual Hub has the RequiredClientId value set to %u. +LH_FARM_SELECT_1 Connection "%S": The cluster controller is deciding the destination cluster member of this client. +LH_FARM_SELECT_2 Connection "%S": Failed to decide the destination cluster member server. +LH_FARM_SELECT_3 Connection "%S": This current VPN Server has been decided as the destination cluster member server. Proceeding to receive connection. +LH_FARM_SELECT_4 Connection "%S": The server "%S" has been decided as a destination cluster member server. Instructing clients to redirect connection to this server. +LH_MAX_SESSION Connection "%S": The maximum number of sessions (%u) that can be set by the Virtual Hub has been reached. Unable to create a new session. +LH_MAX_SESSION_CLIENT Connection "%S": The maximum number of client sessions (%u) that can be set by the Virtual Hub has been reached. Unable to create a new session. +LH_MAX_SESSION_BRIDGE Connection "%S": The maximum number of bridge sessions (%u) that can be set by the Virtual Hub has been reached. Unable to create a new session. +LH_MAX_SESSION_2 Connection "%S": The maximum number of sessions (%u) that can be managed by a VPN Server has been reached. Unable to create a new session. +LH_NEW_SESSION Connection "%S": The new session "%S" has been created. (IP address: %S, Port number: %u, Physical underlying protocol: "%S") +LH_SET_SESSION Session "%S": The parameter has been set. Max number of TCP connections: %u, Use of encryption: %s, Use of compression: %s, Use of Half duplex communication: %s, Timeout: %u seconds. +LH_NODE_INFO Session "%S": VPN Client details: (%s) +LH_VLAN_ID Session "%S": Assigned VLAN ID: %u +LH_INVALID_SIGNATURE Session "%S": The connected client sent invalid protocol data. Unable to establish normal communication with client. First check for problems with the connections and cabling of the network connecting the client and the server and then check there is not a special transparent packet re-writing device installed. +LH_END_SESSION Session "%S": The session has been terminated. The statistical information is as follows: Total outgoing data size: %I64u bytes, Total incoming data size: %I64u bytes. +LH_BCAST_STORM Session "%S": A large volume of broadcast packets has been detected. There are cases where packets are discarded based on the policy. The source MAC address is %S, the source IP address is %S, the destination IP address is %S. The number of broadcast packets is equal to or larger than %u items per 1 second (note this information is the result of mechanical analysis of part of the packets and could be incorrect). +LH_DHCP_FORCE Session "%S": The packet was discarded because it has been attempting to use the IP address %S, which is not a DHCP server allocated IP address. +LH_MAC_LIMIT Session "%S": Although the virtual hub has attempt to assign a new MAC address "%S" was made, %u MAC addresses have already been assigned for this service. According to the security policy, this session is allowed to have a maximum of %u MAC addresses. The packet has been discarded. +LH_BRIDGE_LIMIT Session "%S": Although the virtual hub has attempt to assign a new MAC address "%S" was made, %u MAC addresses have already been assigned for this service. According to the security policy, this session is denied bridges and is therefore allowed to hold no more than %u MAC addresses. The packet has been discarded. +LH_MAC_REGIST Session "%S": A new MAC address "%S" has been assigned. +LH_MAC_REGIST_VLAN Session "%S": A new MAC address "%S" (VLAN ID: %u) has been assigned. +LH_IP_LIMIT Session "%S": Although the virtual hub has attempt to assign a new IP address %S was made, %u IP addresses have already been assigned for this service. According to the security policy, this session is allowed to have a maximum of %u IP addresses. The packet has been discarded. +LH_ROUTING_LIMIT Session "%S": Although the virtual hub has attempt to assign a new IP address %S was made, %u IP addresses have already been assigned for this service. According to the security policy, this session is denied routing and is therefore allowed to hold no more than %u IP addresses. The packet has been discarded. +LH_IP_CONFLICT Session "%S": Although the virtual hub has attempt to use the IP address %S was made, this IP address is already being used by another session "%S" (MAC Address: "%S"). The security policy for this session denies duplication of IP addresses that are used by other sessions. The packet has been discarded. Detailed Information: CreatedTime=%I64u, UpdatedTime=%I64u, DhcpAllocated=%u, Now=%I64u +LH_NO_SERVER Session "%S": Although TCP/IP connection request (from %S:%u to %S:%u) was made to this session, because of the security policy denies operation as a server, the packet has been discarded. +LH_NO_DHCP Session "%S": Although host %S on this session sent a packet that allocates an IP address as a DHCP server for host %S on another session, this session's security policy denies operation as a DHCP server. The packet has been discarded. +LH_REGIST_DHCP Session "%S": The DHCP server of host "%S" (%S) on this session allocated, for host "%S" on another session "%S", the new IP address %S. +LH_BRIDGE_1 Session "%S": A Local Bridge connection to physical Ethernet interface "%S" was started. +LH_BRIDGE_2 Session "%S": Because communication has failed to be established with physical Ethernet interface "%S", the Local Bridge has stopped. +LH_SET_MTU Session "%S": The physical Ethernet interface "%S" has an MTU value set to %u. It is necessary to send and receive an Ethernet packet which has %u bytes. The MTU is now changed to %u. +LH_SET_MTU_ERROR Session "%S": The physical Ethernet interface "%S" has an MTU value set to %u. It is necessary to send and receive an Ethernet packet which has %u bytes. However, changing the MTU to %u failed. This physical Ethernet interface or device driver might be unable to process an Ethernet packet which has more 1,514 bytes (payload size: 1,500 bytes). In such case, the larger tagged-VLAN packets than 1,514 bytes cannot be transmitted. You should replace the current physical Ethernet adapter to another which supports Jumbo Frames. You can also try to update the device driver. Another possible method is to enable Jumbo Frames on the operating system or device driver settings. +LH_START_BRIDGE The Local Bridge connection "%S" has started. The bridge session "%S" was created. +LH_STOP_BRIDGE The Local Bridge connection "%S" has stopped. +LH_LINK_START The Cascade Connection "%s" has been established. The Cascade session "%S" was created. +LH_LINK_STOP The Cascade Connection "%s" has stopped. +LH_NAT_START SecureNAT has started. The SecureNAT session "%S" was created. LH_NAT_STOP SecureNAT stopped. -LH_NAT_TCP_SUCCEED The connection to TCP session %u: Host ""%S (%S)"", Port %u was successful. -LH_NAT_TCP_FAILED The connection to TCP session %u: Host ""%S"", Port %u failed. +LH_NAT_TCP_SUCCEED The connection to TCP session %u: Host "%S (%S)", Port %u was successful. +LH_NAT_TCP_FAILED The connection to TCP session %u: Host "%S", Port %u failed. LH_NAT_TCP_DELETED The TCP session %u has been deleted. LH_NAT_TCP_CREATED The TCP session %u has been created. Connection source %S:%u, Connection destination %S:%u LH_NAT_UDP_DELETED The UDP session %u has been deleted. LH_NAT_UDP_CREATED The UDP session %u has been created. Connection source %S:%u, Connection destination %S:%u LH_NAT_DHCP_CREATED The DHCP entry %u has been created. MAC address: %S, IP address: %S, host name: %S, expiration span: %u seconds -LH_CHANGE_PASSWORD_1 The connection ""%S"" (IP address %S) connected to Virtual Hub in change password mode. -LH_CHANGE_PASSWORD_2 Connection ""%S"": Changing of password failed. The specified user ""%S"" does not exist. -LH_CHANGE_PASSWORD_3 Connection ""%S"": Changing of password failed. The auth type of user ""%S"" is not password authentication. -LH_CHANGE_PASSWORD_4 Connection ""%S"": Changing of password failed. The old password of user ""%S"" is incorrect. -LH_CHANGE_PASSWORD_5 Connection ""%S"": The password of user ""%S"" has been changed. -LH_CONNECT_1 Starting Cascade Connection ""%s"": connection number %u. -LH_CONNECT_2 The Cascade Connection ""%s"" is connected. Session name: ""%S"" -LH_CONNECT_ERROR The connection for Cascade Connection ""%s"" has been either disconnected or it failed. Cause: %s (code %u) -LH_POLICY_MONITOR_MODE Connection ""%S"": Because of a user whose security policy denies permission for Monitoring Mode requested that Monitoring Mode be enabled and attempted to connect to a Virtual Hub, the connection has been denied. -LH_POLICY_BRIDGE_MODE Connection ""%S"": Because of a user whose security policy denies both bridge connections and routing operations requested that bridge connections or routing operations be enabled and attempted to connect to the Virtual Hub, the connection has been denied. -LH_NOT_ENOUGH_CLIENT_LICENSE Connection ""%S"": Although this connection attempted to connect to the VPN Server using ""client connection mode"", because this would have made the number of client connections on the entire server exceed the number of registered Client Connection Licenses, it is not possible to receive the connection for this connection. When the number of licenses for concurrent connections is insufficient, you must either disconnect another existing client connection or increase the number of licenses. There are currently %u registered Client Connection Licenses and the number of connections to servers was %u. -LH_NOT_ENOUGH_BRIDGE_LICENSE Connection ""%S"": Although this connection attempted to connect to the VPN Server using ""bridge connection mode"", because this would have made the number of bridge connections on the entire server exceed the number of registered Bridge Connection Licenses, it is not possible to receive the connection for this connection. When the number of licenses for concurrent connections is insufficient, you must either disconnect another existing client connection or increase the number of licenses. There are currently %u registered Bridge Connection Licenses and the number of connections to servers was %u. -LH_TOO_MANY_MULTILOGINS Connection ""%S"": Although the user ""%S"" made a login attempt, the security policy that applies to this user limits the maximum number of multiple logins to %u sessions. Currently the number of logins by this user is %u sessions and therefore the user has denied permission for a new VPN connection. -LH_TOO_MANY_MULTILOGINS2 Connection ""%S"": Although the user ""%S"" made a login attempt, this edition of the VPN Server permits the maximum number of multiple concurrent VPN sessions to %u sessions per user. Current number of the multiple concurrent VPN sessions of this users is %u, so no more concurrent VPN sessions cannot be permitted. If you want to support more number of multiple concurrent VPN sessions per user, please consider upgrading to Professional Edition or greater of the VPN Server. +LH_CHANGE_PASSWORD_1 The connection "%S" (IP address %S) connected to Virtual Hub in change password mode. +LH_CHANGE_PASSWORD_2 Connection "%S": Changing of password failed. The specified user "%S" does not exist. +LH_CHANGE_PASSWORD_3 Connection "%S": Changing of password failed. The auth type of user "%S" is not password authentication. +LH_CHANGE_PASSWORD_4 Connection "%S": Changing of password failed. The old password of user "%S" is incorrect. +LH_CHANGE_PASSWORD_5 Connection "%S": The password of user "%S" has been changed. +LH_CONNECT_1 Starting Cascade Connection "%s": connection number %u. +LH_CONNECT_2 The Cascade Connection "%s" is connected. Session name: "%S" +LH_CONNECT_ERROR The connection for Cascade Connection "%s" has been either disconnected or it failed. Cause: %s (code %u) +LH_POLICY_MONITOR_MODE Connection "%S": Because of a user whose security policy denies permission for Monitoring Mode requested that Monitoring Mode be enabled and attempted to connect to a Virtual Hub, the connection has been denied. +LH_POLICY_BRIDGE_MODE Connection "%S": Because of a user whose security policy denies both bridge connections and routing operations requested that bridge connections or routing operations be enabled and attempted to connect to the Virtual Hub, the connection has been denied. +LH_NOT_ENOUGH_CLIENT_LICENSE Connection "%S": Although this connection attempted to connect to the VPN Server using "client connection mode", because this would have made the number of client connections on the entire server exceed the number of registered Client Connection Licenses, it is not possible to receive the connection for this connection. When the number of licenses for concurrent connections is insufficient, you must either disconnect another existing client connection or increase the number of licenses. There are currently %u registered Client Connection Licenses and the number of connections to servers was %u. +LH_NOT_ENOUGH_BRIDGE_LICENSE Connection "%S": Although this connection attempted to connect to the VPN Server using "bridge connection mode", because this would have made the number of bridge connections on the entire server exceed the number of registered Bridge Connection Licenses, it is not possible to receive the connection for this connection. When the number of licenses for concurrent connections is insufficient, you must either disconnect another existing client connection or increase the number of licenses. There are currently %u registered Bridge Connection Licenses and the number of connections to servers was %u. +LH_TOO_MANY_MULTILOGINS Connection "%S": Although the user "%S" made a login attempt, the security policy that applies to this user limits the maximum number of multiple logins to %u sessions. Currently the number of logins by this user is %u sessions and therefore the user has denied permission for a new VPN connection. +LH_TOO_MANY_MULTILOGINS2 Connection "%S": Although the user "%S" made a login attempt, this edition of the VPN Server permits the maximum number of multiple concurrent VPN sessions to %u sessions per user. Current number of the multiple concurrent VPN sessions of this users is %u, so no more concurrent VPN sessions cannot be permitted. If you want to support more number of multiple concurrent VPN sessions per user, please consider upgrading to Professional Edition or greater of the VPN Server. LH_PACKET_LOG_NO_LOG The edition of this VPN Server doesn't supports the packet logging function. No IP address nor TCP/UDP header data will be recorded. After you upgrade the edition of the VPN Server to Professional Edition or greater, all kinds of packet logs will be recorded in this file. LH_PACKET_LOG_NO_LOG_OSS The VPN Server is either Open-Source or Free version. It hasn't implemented the IP Address or TCP/UDP header data logging function. No IP address nor TCP/UDP header data are not be recorded here. -LH_NO_RADIUS_SETTING The user ""%S"" is configured to use RADIUS authentication. However, there is no RADIUS authentication settings. The user cannot be authenticated. -LH_KERNEL_MODE_START It has been detected that the Kernel-mode NAT for SecureNAT can be run on the interface ""%S"". The Kernel-mode NAT is starting. The TCP, UDP and ICMP NAT processings will be performed with high-performance via Kernel-Mode hereafter. The parameters of Kernel-mode NAT: IP Address = ""%r"", Subnet Mask = ""%r"", Default Gateway = ""%r"", Broadcast Address = ""%r"", Virtual MAC Address: ""%S"", DHCP Server Address: ""%r"", DNS Server Address: ""%r"" -LH_KERNEL_MODE_STOP The Kernel-mode NAT on the interface ""%S"" for SecureNAT has been stopped. +LH_NO_RADIUS_SETTING The user "%S" is configured to use RADIUS authentication. However, there is no RADIUS authentication settings. The user cannot be authenticated. +LH_KERNEL_MODE_START It has been detected that the Kernel-mode NAT for SecureNAT can be run on the interface "%S". The Kernel-mode NAT is starting. The TCP, UDP and ICMP NAT processings will be performed with high-performance via Kernel-Mode hereafter. The parameters of Kernel-mode NAT: IP Address = "%r", Subnet Mask = "%r", Default Gateway = "%r", Broadcast Address = "%r", Virtual MAC Address: "%S", DHCP Server Address: "%r", DNS Server Address: "%r" +LH_KERNEL_MODE_STOP The Kernel-mode NAT on the interface "%S" for SecureNAT has been stopped. # (Administration log) -LA_CONNECTED_1 Connection ""%S"" connected using server admin mode. -LA_CONNECTED_2 Connection ""%S"" connected using Virtual Hub Admin Mode. The name of the Virtual Hub is ""%S"". -LA_IP_DENIED Connection ""%S"" attempted to connect using administration mode from an IP address whose permission is denied by adminip.txt. Disconnecting. -LA_ERROR Connection ""%S"" was unable to log in using administration mode. %s (Error code %u) -LA_OK Connection ""%S"" successfully logged in using administration mode. -LA_RPC_START Connection ""%S"" created a new remote procedure call session ""%S"" for the purpose of administration mode. +LA_CONNECTED_1 Connection "%S" connected using server admin mode. +LA_CONNECTED_2 Connection "%S" connected using Virtual Hub Admin Mode. The name of the Virtual Hub is "%S". +LA_IP_DENIED Connection "%S" attempted to connect using administration mode from an IP address whose permission is denied by adminip.txt. Disconnecting. +LA_ERROR Connection "%S" was unable to log in using administration mode. %s (Error code %u) +LA_OK Connection "%S" successfully logged in using administration mode. +LA_RPC_START Connection "%S" created a new remote procedure call session "%S" for the purpose of administration mode. LA_TAG_1 Administration mode [%S]: -LA_TAG_2 Administration mode [%S] (Virtual Hub ""%S""): +LA_TAG_2 Administration mode [%S] (Virtual Hub "%S"): LA_CREATE_LISTENER A new TCP listener (port number %u) has been created. LA_DELETE_LISTENER TCP listener (port number %u) has been deleted. LA_ENABLE_LISTENER TCP listener (port number %u) has been enabled. @@ -1984,13 +1983,13 @@ LA_DISABLE_LISTENER TCP listener (port number %u) has been disabled. LA_SET_SERVER_PASSWORD The server administrator password has been set. LA_SET_FARM_SETTING The clustering setting has been changed. LA_SET_SERVER_CERT The server certificates have been set. -LA_REGENERATE_SERVER_CERT The server certificate has been re-generated. The new CN: ""%S"" -LA_SET_SERVER_CIPHER A new encryption algorithm name for the server has been set. The new encryption algorithm name is ""%S"". -LA_CREATE_HUB A new Virtual Hub ""%S"" has been created. +LA_REGENERATE_SERVER_CERT The server certificate has been re-generated. The new CN: "%S" +LA_SET_SERVER_CIPHER A new encryption algorithm name for the server has been set. The new encryption algorithm name is "%S". +LA_CREATE_HUB A new Virtual Hub "%S" has been created. LA_SET_HUB The Virtual Hub setting has been changed. -LA_DELETE_HUB The Virtual Hub ""%S"" has been deleted. +LA_DELETE_HUB The Virtual Hub "%S" has been deleted. LA_SET_HUB_RADIUS The Virtual Hub's external RADIUS authentication server setting has been changed. -LA_DISCONNECT_CONN The client connection ""%S"" connected to the server has been forcefully disconnected. +LA_DISCONNECT_CONN The client connection "%S" connected to the server has been forcefully disconnected. LA_SET_HUB_ONLINE O hub virtual está online agora. LA_SET_HUB_OFFLINE O hub virtual está offline agora. LA_SET_SNAT_OPTION The SecureNAT option has been set. @@ -1999,51 +1998,51 @@ LA_DISABLE_SNAT The SecureNAT function has been disabled. LA_SET_HUB_LOG The log save setting has been changed. LA_ADD_CA A registration of trusted root certificate has been added. LA_DELETE_CA A registration of trusted root certificate has been deleted. -LA_CREATE_LINK The Cascade Connection ""%s"" has been added. -LA_SET_LINK The setting for Cascade Connection ""%s"" has been changed. -LA_SET_LINK_ONLINE The Cascade Connection ""%s"" is now online. -LA_SET_LINK_OFFLINE The Cascade Connection ""%s"" is now offline. -LA_DELETE_LINK The Cascade Connection ""%s"" has been deleted. -LA_RENAME_LINK The name of Cascade Connection ""%s"" has been changed to ""%s"". +LA_CREATE_LINK The Cascade Connection "%s" has been added. +LA_SET_LINK The setting for Cascade Connection "%s" has been changed. +LA_SET_LINK_ONLINE The Cascade Connection "%s" is now online. +LA_SET_LINK_OFFLINE The Cascade Connection "%s" is now offline. +LA_DELETE_LINK The Cascade Connection "%s" has been deleted. +LA_RENAME_LINK The name of Cascade Connection "%s" has been changed to "%s". LA_ADD_ACCESS An access list has been added. LA_DELETE_ACCESS The access list has been deleted. LA_SET_ACCESS_LIST The access list has been updated. An access list of %u items are set. LA_SET_AC_LIST The Source IP Address Limit List has been updated. Rule items for %u items are set. -LA_CREATE_USER User ""%S"" has been created. -LA_SET_USER The setting of user ""%S"" has been updated. -LA_DELETE_USER User ""%S"" has been deleted. -LA_CREATE_GROUP Group ""%S"" has been created. -LA_SET_GROUP The setting of group ""%S"" has been updated. -LA_DELETE_GROUP Group ""%S"" has been deleted. -LA_DELETE_SESSION This session ""%S"" has been forcefully disconnected. +LA_CREATE_USER User "%S" has been created. +LA_SET_USER The setting of user "%S" has been updated. +LA_DELETE_USER User "%S" has been deleted. +LA_CREATE_GROUP Group "%S" has been created. +LA_SET_GROUP The setting of group "%S" has been updated. +LA_DELETE_GROUP Group "%S" has been deleted. +LA_DELETE_SESSION This session "%S" has been forcefully disconnected. LA_SET_KEEP The server's Internet keep-alive setting has been updated. LA_SET_SYSLOG The server's syslog send function setting has been updated. -LA_DELETE_BRIDGE The Local Bridge connection definition ""%S"" --> ""%S"" has been deleted. -LA_ADD_BRIDGE The Local Bridge connection definition ""%S"" --> ""%S"" has been added. +LA_DELETE_BRIDGE The Local Bridge connection definition "%S" --> "%S" has been deleted. +LA_ADD_BRIDGE The Local Bridge connection definition "%S" --> "%S" has been added. LA_REBOOT_SERVER There has been a request to restart VPN Server. LA_GET_CONFIG The config file has been read. LA_SET_CONFIG The config file has been written. Restarting VPN Server. -LA_SET_HUB_ADMIN_OPTION The administration option has been set for Virtual Hub ""%S"". -LA_SET_HUB_EXT_OPTION The Virtual Hub Extended Option has been set for Virtual Hub ""%S"". -LA_ADD_L3_SW The Virtual Layer 3 Switch ""%S"" has been created on the server. -LA_DEL_L3_SW The Virtual Layer 3 Switch ""%S"" has been deleted from the server. -LA_START_L3_SW The Virtual Layer 3 Switch ""%S"" has been started. -LA_STOP_L3_SW The Virtual Layer 3 Switch ""%S"" has been stopped. -LA_ADD_L3_IF The virtual interface for Virtual Hub ""%S"" has been added to Virtual Layer 3 Switch ""%S"". -LA_DEL_L3_IF The virtual interface for Virtual Hub ""%S"" has been deleted from Virtual Layer 3 Switch ""%S"". -LA_ADD_L3_TABLE The routing table for network ""%S"" has been added to Virtual Layer 3 Switch ""%S"". -LA_DEL_L3_TABLE The routing table for network ""%S"" has been deleted from Virtual Layer 3 Switch ""%S"". +LA_SET_HUB_ADMIN_OPTION The administration option has been set for Virtual Hub "%S". +LA_SET_HUB_EXT_OPTION The Virtual Hub Extended Option has been set for Virtual Hub "%S". +LA_ADD_L3_SW The Virtual Layer 3 Switch "%S" has been created on the server. +LA_DEL_L3_SW The Virtual Layer 3 Switch "%S" has been deleted from the server. +LA_START_L3_SW The Virtual Layer 3 Switch "%S" has been started. +LA_STOP_L3_SW The Virtual Layer 3 Switch "%S" has been stopped. +LA_ADD_L3_IF The virtual interface for Virtual Hub "%S" has been added to Virtual Layer 3 Switch "%S". +LA_DEL_L3_IF The virtual interface for Virtual Hub "%S" has been deleted from Virtual Layer 3 Switch "%S". +LA_ADD_L3_TABLE The routing table for network "%S" has been added to Virtual Layer 3 Switch "%S". +LA_DEL_L3_TABLE The routing table for network "%S" has been deleted from Virtual Layer 3 Switch "%S". LA_ADD_CRL A certificate has been added to Certificate Revocation List. LA_DEL_CRL A certificate has been edited in Certificate Revocation List. LA_SET_CRL A registered item in a registration of a list of invalid certificates has been edited. -LA_READ_LOG_FILE The log file on the server ""%S"" (log file ""%S"") has been downloaded. -LA_ADD_LICENSE_KEY A new license key ""%S"" has been registered. +LA_READ_LOG_FILE The log file on the server "%S" (log file "%S") has been downloaded. +LA_ADD_LICENSE_KEY A new license key "%S" has been registered. LA_DEL_LICENSE_KEY An existing license (No. %u) has been deleted. LA_SET_IPSEC_CONFIG The IPsec server setting has been updated. -LA_ADD_ETHERIP_ID A new EtherIP / L2TPv3 server setting (ID=""%S"") has been added. -LA_DEL_ETHERIP_ID The new EtherIP / L2TPv3 server setting (ID=""%S"") has been deleted. +LA_ADD_ETHERIP_ID A new EtherIP / L2TPv3 server setting (ID="%S") has been added. +LA_DEL_ETHERIP_ID The new EtherIP / L2TPv3 server setting (ID="%S") has been deleted. LA_SET_OVPN_SSTP_CONFIG The OpenVPN and MS-SSTP VPN Server setting has been updated. -LA_DDNS_HOSTNAME_CHANGED The hostname of Dynamic DNS Function has been changed to ""%S"". +LA_DDNS_HOSTNAME_CHANGED The hostname of Dynamic DNS Function has been changed to "%S". LA_SET_SPECIAL_LISTENER Special Listener enable / disable status has been changed. @@ -2055,32 +2054,32 @@ LC_END The SoftEther VPN Client Engine has been shut down. LC_LOAD_CONFIG_1 Loading configuration file... LC_LOAD_CONFIG_2 The configuration file has been loaded. LC_LOAD_CONFIG_3 Configuration file does not exist. Applying the initial settings. -LC_NEW_ACCOUNT A new VPN Connection Setting ""%s"" has been created. -LC_DELETE_ACCOUNT The VPN Connection Setting ""%s"" has been deleted. -LC_RENAME_ACCOUNT The name of VPN Connection Setting ""%s"" has been changed to ""%s"". -LC_CONNECT Connection processing for VPN Connection Setting ""%s"" has started. -LC_CONNECT_1 VPN Connection Setting ""%s"": Connection operation starting (this is now %u times). -LC_CONNECT_2 VPN Connection Setting ""%s"": Now connected. Session name: ""%S"" -LC_CONNECT_ERROR VPN Connection Setting ""%s"": The connection has been either disconnected or it failed. Cause: %s (code %u) -LC_DISCONNECT Disconnecting the VPN Connection Setting ""%s"". -LC_CREATE_VLAN Um adaptador de rede virtual ""%S” foi criado. -LC_UPDATE_VLAN O driver do adaptador de rede virtual ""%S” foi reinstalado. -LC_DELETE_VLAN O adaptador de rede virtual ""%S” foi removido. +LC_NEW_ACCOUNT A new VPN Connection Setting "%s" has been created. +LC_DELETE_ACCOUNT The VPN Connection Setting "%s" has been deleted. +LC_RENAME_ACCOUNT The name of VPN Connection Setting "%s" has been changed to "%s". +LC_CONNECT Connection processing for VPN Connection Setting "%s" has started. +LC_CONNECT_1 VPN Connection Setting "%s": Connection operation starting (this is now %u times). +LC_CONNECT_2 VPN Connection Setting "%s": Now connected. Session name: "%S" +LC_CONNECT_ERROR VPN Connection Setting "%s": The connection has been either disconnected or it failed. Cause: %s (code %u) +LC_DISCONNECT Disconnecting the VPN Connection Setting "%s". +LC_CREATE_VLAN Um adaptador de rede virtual "%S” foi criado. +LC_UPDATE_VLAN O driver do adaptador de rede virtual "%S” foi reinstalado. +LC_DELETE_VLAN O adaptador de rede virtual "%S” foi removido. LC_SET_PASSWORD The password setting for connection to a client service has been changed. LC_TAP_NOT_FOUND Cannot find the tun/tap driver for Mac OS X. Please install the tun/tap driver. # (Eraser log) -LE_START Monitoring the directory ""%S"". If the amount of available free disk space becomes less than %S, the backup files for log files and configurations that are saved on the sub-directories of this directory will be automatically deleted in the order of oldest first. The amount of free disk space that determines when to start deletion can be modified by changing the ""AutoDeleteCheckDiskFreeSpaceMin"" item in the configuration file. -LE_DELETE The free disk space is now less then %S so the old file ""%S"" has been automatically deleted. The amount of free disk space that determines when to start deletion can be modified by changing the ""AutoDeleteCheckDiskFreeSpaceMin"" item in the configuration file. +LE_START Monitoring the directory "%S". If the amount of available free disk space becomes less than %S, the backup files for log files and configurations that are saved on the sub-directories of this directory will be automatically deleted in the order of oldest first. The amount of free disk space that determines when to start deletion can be modified by changing the "AutoDeleteCheckDiskFreeSpaceMin" item in the configuration file. +LE_DELETE The free disk space is now less then %S so the old file "%S" has been automatically deleted. The amount of free disk space that determines when to start deletion can be modified by changing the "AutoDeleteCheckDiskFreeSpaceMin" item in the configuration file. LE_NOT_ENOUGH_FREE <> If the free disk space becomes lower than %S, it will no longer be possible to automatically delete the old backup files of log files and configurations. We recommend that you immediately manually delete the unnecessary files on this computer and recover the necessary free disk space. When there is a very small amount of free disk space, computer operation can become unstable. # (Layer 3 Switch log) -L3_SWITCH_START The Virtual Layer 3 Switch ""%S"" started. It will wait until the Virtual Hubs of all interfaces registered on this switch become online and then it will start operation. -L3_SWITCH_ONLINE The Virtual Hubs of all interfaces of the Virtual Layer 3 Switch ""%S"" are online and the Virtual Layer 3 Switch has commenced Virtual Layer 3 Switch operation. -L3_SWITCH_OFFLINE At least one Virtual Hub of an interface registered on Virtual Layer 3 Switch ""%S"" stopped, and Virtual Layer 3 Switch operation has been stopped. -L3_SWITCH_STOP The Virtual Layer 3 Switch ""%S"" terminated. +L3_SWITCH_START The Virtual Layer 3 Switch "%S" started. It will wait until the Virtual Hubs of all interfaces registered on this switch become online and then it will start operation. +L3_SWITCH_ONLINE The Virtual Hubs of all interfaces of the Virtual Layer 3 Switch "%S" are online and the Virtual Layer 3 Switch has commenced Virtual Layer 3 Switch operation. +L3_SWITCH_OFFLINE At least one Virtual Hub of an interface registered on Virtual Layer 3 Switch "%S" stopped, and Virtual Layer 3 Switch operation has been stopped. +L3_SWITCH_STOP The Virtual Layer 3 Switch "%S" terminated. # Concerning Microsoft.c @@ -2130,14 +2129,14 @@ UT_SM_ST_WINS_2 WINS Server 2 # Concerning EtherLogger Manager EM_TITLE SoftEther EtherLogger Gerenciador -EM_REMOTE_TITLE You can connect to and manage the SoftEther EtherLogger service. \r\nEnter the host name and IP address of the computer on which the EtherLogger service to be managed is operating. You can also concatenate the port number by using the "":"" (colon). +EM_REMOTE_TITLE You can connect to and manage the SoftEther EtherLogger service. \r\nEnter the host name and IP address of the computer on which the EtherLogger service to be managed is operating. You can also concatenate the port number by using the ":" (colon). EM_MAIN_COLUMN_1 Nome do adaptador de rede EM_MAIN_COLUMN_2 Status EM_MAIN_OK Operativo EM_MAIN_ERROR Erro EM_ADD_NEW Add new capture device EM_ADD_EDIT Edit capture settings -EM_DELETE_CONFIRM Are you sure you want to delete capture setting ""%S""? +EM_DELETE_CONFIRM Are you sure you want to delete capture setting "%S"? EM_NO_LICENSE_COLUMN Nota: EM_NO_LICENSE Because not even one product license is registered, this SoftEther EtherLogger will not operate. EM_UNSUPPORTED Unable to use SoftEther EtherLogger on the operating system that this SoftEther EtherLogger is operating on. For the list of operating system that the SoftEther EtherLogger can be used on, please refer to the online documentation of the SoftEther EtherLogger. @@ -2191,7 +2190,7 @@ IDOK &OK IDCANCEL Cancelar PREFIX D_NM_CONNECT CAPTION Connect to SoftEther VPN User-mode Router -S_TITLE Connecting to ""%S""... +S_TITLE Connecting to "%S"... PREFIX D_PASSWORD CAPTION Acesso para %S S_TITLE Enter your user name and password to log in to server %S. Make sure you select the correct auth type. @@ -2204,7 +2203,7 @@ S_COUNTDOWN An automatic reconnection will be made after %u seconds... IDOK &OK IDCANCEL Cancelar conexão PREFIX D_STATUS -CAPTION Connecting to ""%s""... +CAPTION Connecting to "%s"... S_STATUS Inicializando... IDCANCEL Cancelar PREFIX D_CERT @@ -2222,10 +2221,10 @@ IDCANCEL &OK B_SAVE &Salvar para arquivo PREFIX D_CHECKCERT CAPTION Security Alert - %s -S_TITLE Although the connection to the destination VPN Server ""%S"" that you are currently connecting to is encrypted, the trustworthiness of the server certificate provided by the server is unknown. +S_TITLE Although the connection to the destination VPN Server "%S" that you are currently connecting to is encrypted, the trustworthiness of the server certificate provided by the server is unknown. STATIC1 About the Server Certificate STATIC2 Establishing encrypted tunnel (SSL session) between VPN Server and VPN Client. Checking the server certificate enables to verify the authenticity of the server. -S_MSG1 The server certificate provided by destination VPN Server ""%S"" is as follows. +S_MSG1 The server certificate provided by destination VPN Server "%S" is as follows. STATIC3 Emitido para: STATIC4 Emissor: STATIC5 Expira às: @@ -2238,7 +2237,7 @@ STATIC8 There may be a problem with this certificate, such as it has not been is STATIC9 Confirm the content of this certificate and decide whether or not to connect to this VPN Server. Click Cancel Connection to abort the connection. PREFIX D_CONNECTERROR CAPTION Connect Error - %s -S_TITLE An error occurred while connection to VPN Server ""%S"". +S_TITLE An error occurred while connection to VPN Server "%S". S_COUNTDOWN Reconecta-se automaticamente após %u segundos... IDOK &Repetir IDCANCEL Cancelar conexão @@ -2429,8 +2428,8 @@ IDOK &OK IDCANCEL Cancelar PREFIX D_CM_DESKTOP CAPTION Connection - %s -S_TITLE Starting connect process for VPN Connection Setting ""%s"". -S_WARNING VPN Client will output to the ""Console Session"" window of %s, the progress status and error messages related to the process of connecting to VPN Server +S_TITLE Starting connect process for VPN Connection Setting "%s". +S_WARNING VPN Client will output to the "Console Session" window of %s, the progress status and error messages related to the process of connecting to VPN Server S_INFO Do you want to proceed with the connection? IDOK &ContinuAR IDCANCEL Cancelar @@ -2488,7 +2487,7 @@ IDOK &OK IDCANCEL Cancelar PREFIX D_SM_SERVER CAPTION %s - Gerencidor SoftEther VPN Servidor -S_TITLE Manage VPN Server ""%S"" +S_TITLE Manage VPN Server "%S" S_VHUB_BRIDGE Virtual Hubs Hosted by this VPN Server: IDOK M&anage Virtual Hub B_ONLINE &Online @@ -2634,7 +2633,7 @@ B_REFRESH A&tualizar IDCANCEL S&air PREFIX D_SM_FARM CAPTION Configuração de cluster -S_TITLE You can change configuration for clustering function of VPN Server ""%S"". +S_TITLE You can change configuration for clustering function of VPN Server "%S". STATIC1 Clustering can realize load balancing and fault balance protection to bundle multiple VPN Servers. STATIC2 Current Mode: STATIC3 Clustering Se&ttings: @@ -2703,7 +2702,7 @@ B_SESSION Manage &Sessions IDCANCEL S&air PREFIX D_SM_USER CAPTION Gerenciar usuários -S_TITLE Virtual Hub ""%S"" has the following users. +S_TITLE Virtual Hub "%S" has the following users. IDOK &Editar B_CREATE &Novo B_DELETE &Remover @@ -2751,7 +2750,7 @@ IDOK &OK IDCANCEL Cancelar PREFIX D_SM_GROUP CAPTION Manage Groups -S_TITLE Virtual Hub ""%S"" has the following groups. +S_TITLE Virtual Hub "%S" has the following groups. B_CREATE &Novo IDOK &Editar B_DELETE &Remover @@ -2770,7 +2769,7 @@ IDOK &OK IDCANCEL Cancelar PREFIX D_SM_ACCESS_LIST CAPTION Listas de acesso -S_TITLE The Virtual Hub ""%S"" has the following access lists (packet filtering rules). +S_TITLE The Virtual Hub "%S" has the following access lists (packet filtering rules). B_ADD &Novo (IPv&4) B_ADD_V6 &Novo (IPv&6) IDOK &Editar @@ -2799,14 +2798,14 @@ S_SRC_IP_1 Endereço IPv4: S_SRC_IP_2 Máscara de sub-rede: S_SRC_IP_3 (255.255.255.255 means a single host) S_SRC_IP_1_V6 Endereço IPv6: -S_SRC_IP_3_V6 (Por exemplo: ""ffff:ff00::"" ou ""/24"". ""/128"" significa um único host.) +S_SRC_IP_3_V6 (Por exemplo: "ffff:ff00::" ou "/24". "/128" significa um único host.) S_ACCESS_DST_ALL Destination IP Address: R_DST_ALL Applies to All Destination Addresses S_IP_DST_1 Endereço IPv4: S_IP_DST_2 Máscara de sub-rede: S_IP_DST_3 (255.255.255.255 means Specified host only) S_IP_DST_1_V6 Endereço IPv6: -S_IP_DST_3_V6 (Por exemplo: ""ffff:ff00::"" ou ""/24"". ""/128"" significa um único host.) +S_IP_DST_3_V6 (Por exemplo: "ffff:ff00::" ou "/24". "/128" significa um único host.) STATIC9 Protocol Type: STATIC10 Filtering Options for TCP Headers and UDP Headers S_TCP_1 Mínimo @@ -2837,7 +2836,7 @@ R_CHECK_DST_MAC Applies to any Destination Addresses B_SIMULATION De&lay and Packet Loss... S_DST_MAC Endereço MAC: S_DST_MAC_MASK Máscara: -S_MAC_NOTE You can use hexadecimal number with two separators, ""-"" or "":"", and without the separators.\r\n(FF-FF-FF-FF-FF-FF means a specified host) +S_MAC_NOTE You can use hexadecimal number with two separators, "-" or ":", and without the separators.\r\n(FF-FF-FF-FF-FF-FF means a specified host) R_CHECK_TCP_STATE Verify TCP Connection State (Only TCP Packets) R_ESTABLISHED Established Packet R_UNESTABLISHED Unestablished Packet @@ -2845,7 +2844,7 @@ R_REDIRECT Redirect HTTP Request to Specific URL B_REDIRECT Set URL Redirect to... PREFIX D_SM_RADIUS CAPTION Authentication Server Settings -S_TITLE To use an external RADIUS server to verify login attempts to the Virtual Hub ""%S"", specify an external RADIUS server that verifies the user name and password. +S_TITLE To use an external RADIUS server to verify login attempts to the Virtual Hub "%S", specify an external RADIUS server that verifies the user name and password. STATIC1 RADIUS Server Settings: R_USE_RADIUS &Use RADIUS Authentication S_RADIUS_1 RADIUS &Server Host Name or IP: @@ -2876,7 +2875,7 @@ B_REFRESH &Atualizar IDCANCEL S&air PREFIX D_SM_LOG CAPTION Log Save Settings -S_TITLE You can save the security logs (such as history of user logins) of Virtual Hub ""%S"", and the packet logs of all packets that pass through the Virtual Hub. +S_TITLE You can save the security logs (such as history of user logins) of Virtual Hub "%S", and the packet logs of all packets that pass through the Virtual Hub. STATIC1 &Security Log: B_SEC Save S&ecurity Log S_SEC Logar ciclo de troca de arquivos: @@ -2927,7 +2926,7 @@ IDCANCEL &Fechar B_DELETE &Excluir PREFIX D_SM_SESSION CAPTION Manage Sessions - %S -S_TITLE Virtual Hub ""%S"" has the following VPN sessions currently. +S_TITLE Virtual Hub "%S" has the following VPN sessions currently. STATIC1 Operations for Sessions IDOK Session &Information B_DISCONNECT &Desconectar @@ -2941,13 +2940,13 @@ IDCANCEL S&air S_FARM_INFO_2 The sessions displayed here are all sessions on the current cluster. To manage sessions on other cluster member servers you must connect as an administrator to those servers. PREFIX D_SM_MAC CAPTION MAC Address Table -S_TITLE The MAC address table database on the Virtual Hub ""%S"" has the following entries. +S_TITLE The MAC address table database on the Virtual Hub "%S" has the following entries. B_DELETE &Excluir entrada selecionada B_REFRESH A&tualizar IDCANCEL S&air PREFIX D_SM_IP CAPTION IP Address Table -S_TITLE The IP address table database on the Virtual Hub ""%S"" has the following entries. +S_TITLE The IP address table database on the Virtual Hub "%S" has the following entries. B_DELETE &Excluir entrada selecionada B_REFRESH A&tualizar IDCANCEL S&air @@ -3007,7 +3006,7 @@ B_ABOUT &Sobre... IDCANCEL S&air PREFIX D_NM_OPTION CAPTION SecureNAT Configuration -S_TITLE Set how SecureNAT virtual host performs operation on the virtual network of Virtual Hub ""%S"". +S_TITLE Set how SecureNAT virtual host performs operation on the virtual network of Virtual Hub "%S". STATIC1 Virtual Host's Network Interface Settings: STATIC2 &MAC Address: STATIC3 Endereço I&P: @@ -3058,7 +3057,7 @@ IDOK &OK IDCANCEL Cancelar PREFIX D_SM_SNAT CAPTION Virtual NAT and Virtual DHCP Function (SecureNAT) Setting -S_TITLE SecureNAT enables you to operate a virtual NAT router (IP Masquerade) and DHCP Server function on a virtual network of Virtual Hub ""%S"". +S_TITLE SecureNAT enables you to operate a virtual NAT router (IP Masquerade) and DHCP Server function on a virtual network of Virtual Hub "%S". STATIC1 Warning about SecureNAT S_WARNING The SecureNAT function is recommended only for system administrators or people with a detailed knowledge of networking. S_WARNING2 If you use the SecureNAT correctly, it is possible to realize a safety remote access via a VPN. However when you use this as incorrectly, it can put the entire network in danger. Anyone who does not have a thorough knowledge of networks and anyone who does not have the network administrator's permission must not enable the SecureNAT. For a detailed explanation of the SecureNAT function, please refer to the VPN Server's manual or online documentation. @@ -3073,7 +3072,7 @@ STATIC6 You can view the current SecureNAT operating status. B_NAT Virtual &NAT Router Status B_DHCP Status do servidor D&HCP virtual B_STATUS View &SecureNAT Operating Status -S_TSUKUBA2 SecureNAT uses technology that Daiyuu Nobori developed in 2004 at ""Special Seminar on Information I"" at the College of Information Science of the Third Cluster of Colleges, Tsukuba University. +S_TSUKUBA2 SecureNAT uses technology that Daiyuu Nobori developed in 2004 at "Special Seminar on Information I" at the College of Information Science of the Third Cluster of Colleges, Tsukuba University. IDCANCEL S&air PREFIX D_SM_BRIDGE CAPTION Local Bridge Settings @@ -3182,7 +3181,7 @@ IDCANCEL Cancelar B_ABOUT Informações da versão PREFIX D_SM_CONFIG CAPTION Edit Config File -IDC_INFO The current configuration of the VPN Server ""%S"" is as follows.\r\nYou can edit the contents of this configuration file and apply it to the VPN Server. +IDC_INFO The current configuration of the VPN Server "%S" is as follows.\r\nYou can edit the contents of this configuration file and apply it to the VPN Server. B_EXPORT &Salvar para arquivo B_IMPORT &Import File and Apply IDCANCEL &Fechar @@ -3190,25 +3189,25 @@ STATIC1 You can edit the configuration file by using any text editors. When appl B_FACTORY &Restore to Factory Default PREFIX D_SM_ADMIN_OPTION CAPTION Virtual Hub Administration Option -S_INFO Currently the following administration options are set for the Virtual Hub ""%S"". +S_INFO Currently the following administration options are set for the Virtual Hub "%S". B_ADD &Adicionar valor B_EDIT &ditar valor: B_DELETE &Excluir valor STATIC1 The purpose of the Virtual Hub administration options is to set limitations to administrators who are in Virtual Hub Admin Mode. IDOK &Salvar IDCANCEL Cancelar -STATIC2 Only an administrator for this entire VPN Server may edit the Virtual Hub administration options. The individual Virtual Hub administrators are unable to change the administration options, however they are able to view them.\r\nHowever, if allow_hub_admin_change_option is set to ""1"", then Virtual Hub administrators are able to edit the administration options. +STATIC2 Only an administrator for this entire VPN Server may edit the Virtual Hub administration options. The individual Virtual Hub administrators are unable to change the administration options, however they are able to view them.\r\nHowever, if allow_hub_admin_change_option is set to "1", then Virtual Hub administrators are able to edit the administration options. S_BOLD Descrição: PREFIX D_SM_MSG CAPTION Set the Message -S_MSG_2 You can set a message to display on the screen of a user when a VPN Client connects to the Virtual Hub ""%S"". To show a message, input the message that you want to show. +S_MSG_2 You can set a message to display on the screen of a user when a VPN Client connects to the Virtual Hub "%S". To show a message, input the message that you want to show. C_USEMSG Show &Message STATIC1 About the Message Display Function -S_INFO The VPN Client must be Version 3.0 or later.\r\n\r\nSpecify a single line starts with ""http://"" as the message to open the default Web browser on the client instead to showing a message. +S_INFO The VPN Client must be Version 3.0 or later.\r\n\r\nSpecify a single line starts with "http://" as the message to open the default Web browser on the client instead to showing a message. IDOK &OK IDCANCEL Cancelar PREFIX D_NICINFO -CAPTION Status do adaptador de rede virtual ""%S"" +CAPTION Status do adaptador de rede virtual "%S" IDCANCEL &Fechar PREFIX D_SM_VLAN CAPTION Ferramenta de configuração de transparência da VLAN @@ -3260,7 +3259,7 @@ STATIC2 &Nome: IDOK &OK IDCANCEL Cancelar PREFIX D_SM_L3_SW -CAPTION Edit Virtual Layer 3 Switch ""%S"" +CAPTION Edit Virtual Layer 3 Switch "%S" STATIC1 You can define multiple virtual interfaces and routing tables on a Virtual Layer 3 Switch. STATIC2 A virtual interface is associated to a Virtual Hub and operates as a single IP host on the Virtual Hub when the Virtual Hub is running. When multiple virtual interfaces that respectively belong to a different IP network of a different Virtual Hub are defined, IP routing will be automatically performed between these interfaces. \r\nIt is possible to manually set the routing table and more detailed settings. S_BOLD1 Virtual &Interfaces: @@ -3382,7 +3381,7 @@ IDOK &OK IDCANCEL Cancelar PREFIX D_SM_AC_LIST CAPTION Source IP Address Limit List -S_TITLE To allow or deny VPN connections to this VPN Server Virtual Hub ""%S"" according to the client computer's IP address, you can set the rules to allow or deny the connection below. +S_TITLE To allow or deny VPN connections to this VPN Server Virtual Hub "%S" according to the client computer's IP address, you can set the rules to allow or deny the connection below. B_ADD &Nova regra IDOK &Editar regra B_DELETE &Excluir regra @@ -3416,11 +3415,11 @@ B_REFRESH &Atualizar IDCANCEL Fechar PREFIX D_SM_READ_LOG_FILE CAPTION Download File -S_INFO2 Downloading the file ""%S"" from the VPN Server. \r\nPlease wait... +S_INFO2 Downloading the file "%S" from the VPN Server. \r\nPlease wait... IDCANCEL &Stop Download PREFIX D_SM_SAVE_LOG CAPTION Downloaded Log File -S_INFO The file ""%S"" has been downloaded. \r\n\r\nYou can open or save this file. +S_INFO The file "%S" has been downloaded. \r\n\r\nYou can open or save this file. IDOK &Abrir B_SAVE &Salvar IDCANCEL Cancelar @@ -3454,9 +3453,9 @@ IDOK &Próximo > IDOK3 < &Voltar PREFIX D_CM_PKCSEULA CAPTION Notice to Use Smart Card's Drivers -S_INFO_1 You are attempting to access the smart card with software ""%S"". -S_INFO_2 When using software ""%S"", if there are conditions of use for this software and the smart card that is to be used, you must agree to these conditions of use before using them. \r\n\r\nFor details please contact the vendor of software ""%S"" and of the smart card. -S_INFO_3 Do you agree to the above and want to use the software ""%S"" and access the specified smart card? +S_INFO_1 You are attempting to access the smart card with software "%S". +S_INFO_2 When using software "%S", if there are conditions of use for this software and the smart card that is to be used, you must agree to these conditions of use before using them. \r\n\r\nFor details please contact the vendor of software "%S" and of the smart card. +S_INFO_3 Do you agree to the above and want to use the software "%S" and access the specified smart card? IDOK &Sim IDCANCEL &Não PREFIX D_CM_TRAFFIC @@ -3519,7 +3518,7 @@ IDCANCEL Cancelar PREFIX D_FREEINFO CAPTION About SoftEther VPN Server Free Edition S_INFO_1 Thank you for trying out the SoftEther VPN Server Free Edition. -S_INFO_2 The SoftEther VPN Server operating on destination server ""%S"" is the Free Edition intended for personal use. \r\nWhen using the Free Edition, you can use all the SoftEther VPN Server functions but the User Agreement prohibits the following usage. +S_INFO_2 The SoftEther VPN Server operating on destination server "%S" is the Free Edition intended for personal use. \r\nWhen using the Free Edition, you can use all the SoftEther VPN Server functions but the User Agreement prohibits the following usage. S_INFO_3 Use where communication for commercial purposes travels via the VPN Server. S_INFO_4 Note that if the software is used based on the above mentioned prohibited usage, it is a breach of the SoftEther VPN Server user agreement. The above restriction is lifted once you obtain a regular product license for SoftEther VPN Server. For details on the regular product version, please visit www.softether.com. \r\n\r\nIf this server is being used under the usage described above, please contact us via our website at www.softether.com. \r\n\r\nNote: This window will appear when connected to a Free Edition of VPN Server. This window does not appear when Editions other than the Free Editions of the software product are used. \r\nNote: Apart from this notification window, there are absolutely no differences between the Free Edition software and the product version. B_HIDE &Hide this window next time. @@ -3604,14 +3603,14 @@ S03 Make VPN Connections from iPhone, iPad, Android, Windows, and Mac OS X accep R_L2TP_RAW Enable L2TP Server Function (Raw &L2TP with No Encryptions) S04 It supports special VPN Clients which uses L2TP with no IPsec encryption. S_1 Default Virtual &Hub in a case of omitting a name of Hub on the Username: -S_2 Users should specify their username such as ""Username@Target Virtual Hub Name"" to connect this L2TP Server.\r\nIf designation of a Virtual Hub is omitted, the below Hub will be used as the target. +S_2 Users should specify their username such as "Username@Target Virtual Hub Name" to connect this L2TP Server.\r\nIf designation of a Virtual Hub is omitted, the below Hub will be used as the target. S05 EtherIP Server Function (Site-to-Site VPN Connection) S06 Router products which are compatible with EtherIP / L2TPv3 over IPsec can connect to Virtual Hub on the VPN Server and establish Layer-2 (Ethernet) Bridging. R_ETHERIP Enable &EtherIP / L2TPv3 over IPsec Server Function B_DETAIL EtherIP / L2TPv3 &Detail Settings S07 IPsec &Common Settings S_PSK IPsec &Pre-Shared Key: -S_PSK2 IPsec Pre-Shared Key is also called ""PSKs"" or ""Secrets"". Specify it with around eight ASCII characters, and let all VPN users know. +S_PSK2 IPsec Pre-Shared Key is also called "PSKs" or "Secrets". Specify it with around eight ASCII characters, and let all VPN users know. IDOK &OK IDCANCEL Cancelar PREFIX D_SM_ETHERIP @@ -3672,7 +3671,7 @@ S_STATUS6 &Change the Dynamic DNS Hostname: S_STATUS7 Hostname is with only alphabets numeric, and dashes '-'. Three letters at least.\r\nYou can change it any time later. IDOK Set to &Above Hostname B_RESTORE &Restaurar -S_2 If you are not connected to IPv6 Internet, ""Global IPv6 Address"" should show an error.\r\nA few countries or territories might prohibit Dynamic DNS Service. +S_2 If you are not connected to IPv6 Internet, "Global IPv6 Address" should show an error.\r\nA few countries or territories might prohibit Dynamic DNS Service. IDCANCEL S&air B_DISABLE &Disable Dynamic DNS Function B_PROXY Connect via &Proxy Server... @@ -3716,11 +3715,11 @@ CAPTION D_SW_MODE R_SYSTEM &System Mode (Recommended) R_USER &Modo de usuário S_1 Install the VPN software to this computer normally. The administrator privilege is required. -S_USER Install the VPN software with the normal user privilege. No administrator privilege is required. Some functions such as Local Bridge will be disabled. Runs only the user ""%s"" is logged on Windows. +S_USER Install the VPN software with the normal user privilege. No administrator privilege is required. Some functions such as Local Bridge will be disabled. Runs only the user "%s" is logged on Windows. S_2 SoftEther VPN can be installed by one of two methods.\r\n\r\nPlease select the System Mode normally.\r\n\r\nIf you cannot use the administrator privilege for some reasons, you can select the User Mode to continue the installation. PREFIX D_SW_NOT_ADMIN CAPTION D_SW_NOT_ADMIN -S_INFO The user ""%s"" which is logged on Windows does not have the administrator privilege.\r\n\r\nLog off Windows, log on by the user who has the administrator privilege and restart the Setup Wizard if you want to continue the setup. +S_INFO The user "%s" which is logged on Windows does not have the administrator privilege.\r\n\r\nLog off Windows, log on by the user who has the administrator privilege and restart the Setup Wizard if you want to continue the setup. S_INFO6 Click Finish to exit the Setup Wizard. S_INFO2 If you cannot use the administrator privilege, you can choose the User Mode installation.\r\nTo install the software in the User Mode, click Back. PREFIX D_SW_COMPONENTS @@ -3740,8 +3739,8 @@ S_DEST &Diretório: B_BROWSE &Pesquisar... R_SHOWCUSTOM Opções avançadas de instalação para especialistas R_FOR_SYSTEM Instalar para &qualquer usuário -R_FOR_USER Instalar apenas no ambiente do usuário ""%s"" -S_WARNING Caution: Not recommended. After the user ""%s"" logs off Windows, %s will stop. Local Bridge function and L2TP/IPsec Function (supports for Mac and Smartphones) will be unavailabe. +R_FOR_USER Instalar apenas no ambiente do usuário "%s" +S_WARNING Caution: Not recommended. After the user "%s" logs off Windows, %s will stop. Local Bridge function and L2TP/IPsec Function (supports for Mac and Smartphones) will be unavailabe. PREFIX D_SW_READY CAPTION D_SW_READY S_INFO Instalação do %s esta pronta. @@ -3819,7 +3818,7 @@ PREFIX D_SM_VMBRIDGE CAPTION Instructions for Local Bridge on VM S_TITLE Using Local Bridge Function on VM S_1 It has been detected that the VPN Server might be running on a VM (Virtual Machine) suchlike VMware or Hyper-V. Read the following instructions carefully. If you are not using a VM, please ignore this message. -S_2 Some VMs prohibit the ""Promiscuous Mode"" (MAC Address Spoofing) on the network adapters by default.\r\n\r\nIf the Promiscuous Mode (MAC Address Spoofing) is administratively disabled, the Local Bridge function between a Virtual Hub on the VPN Server and a physical network adapter on the physical computer does not work well. You should allow the Promiscuous Mode (MAC Address Spoofing) by using the configuration tool of the VM.\r\n\r\nFor details please refer the documents of your VM. If it is a shared-VM and administrated by other person, please request the administrator to permit the use of the Promiscuous (MAC Address Spoofing) Mode to your VM. +S_2 Some VMs prohibit the "Promiscuous Mode" (MAC Address Spoofing) on the network adapters by default.\r\n\r\nIf the Promiscuous Mode (MAC Address Spoofing) is administratively disabled, the Local Bridge function between a Virtual Hub on the VPN Server and a physical network adapter on the physical computer does not work well. You should allow the Promiscuous Mode (MAC Address Spoofing) by using the configuration tool of the VM.\r\n\r\nFor details please refer the documents of your VM. If it is a shared-VM and administrated by other person, please request the administrator to permit the use of the Promiscuous (MAC Address Spoofing) Mode to your VM. S_BOLD Instruções IDCANCEL &OK PREFIX D_SM_AZURE @@ -3832,7 +3831,7 @@ B_BOLD Configuração VPN Azure R_ENABLE &Enable VPN Azure R_DISABLE &Disable VPN Azure S_HOSTNAME_BORDER Current VPN Azure Hostname -S_HOSTNAME_INFO The VPN Azure hostname is same to the Dynamic DNS hostname, but altering the domain suffix to ""vpnazure.net"". +S_HOSTNAME_INFO The VPN Azure hostname is same to the Dynamic DNS hostname, but altering the domain suffix to "vpnazure.net". B_CHANGE Change &Hostname B_WEB How to Use VPN Azure\r\n(Visit the Web) IDCANCEL &OK @@ -3861,8 +3860,8 @@ S_RESEARCH Academic project at University of Tsukuba, Japan. S_INFO9 A VPN Server with higher Line Speed (measured by Mbps) and smaller Ping result are usually more comfortable to use. You might be able to browse websites which are normally unreachable from your area if you use VPN servers that are not in your area. PREFIX D_VGC_PROTOCOL CAPTION Select VPN Protocol to Connect -S_TITLE The Public VPN Relay Server ""%S"" (%S) supports both TCP and UDP as VPN protocol. -S_INFO Select preferred VPN Protocol to use in order to connect the VPN Server ""%S"" (%S). In general, the TCP protocol is easy to pass through the firewall. Try the UDP protocol only if the TCP has been failed. +S_TITLE The Public VPN Relay Server "%S" (%S) supports both TCP and UDP as VPN protocol. +S_INFO Select preferred VPN Protocol to use in order to connect the VPN Server "%S" (%S). In general, the TCP protocol is easy to pass through the firewall. Try the UDP protocol only if the TCP has been failed. R_TCP Use &TCP Protocol (Ethernet over HTTPS VPN) (Recommended) R_UDP Use &UDP Protocol (Ethernet over UDP VPN) IDOK &OK @@ -3917,7 +3916,7 @@ S2 Whether or not a VPN client can recognize the classless static routes (RFC 34 S3 You can realize the split tunneling if you clear the default gateway field on the Virtual DHCP Server options. On the client side, L2TP/IPsec and MS-SSTP clients need to be configured not to set up the default gateway for the split tunneling usage. S4 You can also push the classless static routes (RFC 3442) by your existing external DHCP server. In that case, disable the Virtual DHCP Server function on SecureNAT, and you need not to set up the classless routes on this screen. S5 Edit the static routing table to push -S6 Example: 192.168.5.0/255.255.255.0/192.168.4.254, 10.0.0.0/255.0.0.0/192.168.4.253\r\n\r\nSplit multiple entries (maximum: 64 entries) by comma or space characters.\r\nEach entry must be specified in the ""IP network address/subnet mask/gateway IP address"" format. +S6 Example: 192.168.5.0/255.255.255.0/192.168.4.254, 10.0.0.0/255.0.0.0/192.168.4.253\r\n\r\nSplit multiple entries (maximum: 64 entries) by comma or space characters.\r\nEach entry must be specified in the "IP network address/subnet mask/gateway IP address" format. S7 See the RFC 3442 to understand the classless routes. IDOK &OK IDCANCEL Cancelar @@ -4023,18 +4022,18 @@ PREFIX NULL # Console system general -CON_INFILE_ERROR Error: Unable to open the specified input file ""%s"". -CON_OUTFILE_ERROR Error: Unable to create the specified output file ""%s"". -CON_INFILE_START The commands written in the file ""%s"" will be used instead of input from keyboard. -CON_OUTFILE_START The message output to the console will be saved in the file ""%s"". +CON_INFILE_ERROR Error: Unable to open the specified input file "%s". +CON_OUTFILE_ERROR Error: Unable to create the specified output file "%s". +CON_INFILE_START The commands written in the file "%s" will be used instead of input from keyboard. +CON_OUTFILE_START The message output to the console will be saved in the file "%s". CON_USER_CANCEL [EOF] CON_UNKNOWN_CMD "%S": Command not found. \nYou can use the HELP command to view a list of the available commands. CON_AMBIGUOUS_CMD "%S": The command-name is ambiguous. CON_AMBIGUOUS_CMD_1 The specified command name matches the following multiple commands. CON_AMBIGUOUS_CMD_2 Please re-specify the command name more strictly. -CON_INVALID_PARAM The parameter ""/%S"" has been specified. It is not possible to specify this parameter when using the command ""%S"". Input ""%S /HELP"" to see the list of what parameters can be used. +CON_INVALID_PARAM The parameter "/%S" has been specified. It is not possible to specify this parameter when using the command "%S". Input "%S /HELP" to see the list of what parameters can be used. CON_AMBIGUOUS_PARAM "%S": The parameter name is ambiguous. -CON_AMBIGUOUS_PARAM_1 The specified parameter name matches with the following parameters that can be specified as a parameter of command ""%S"". +CON_AMBIGUOUS_PARAM_1 The specified parameter name matches with the following parameters that can be specified as a parameter of command "%S". CON_AMBIGUOUS_PARAM_2 Please re-specify the parameter name more strictly. @@ -4047,13 +4046,13 @@ CMD_UNKNOWN_PARAM There is no description for this parameter. # Strings being used within console system CMD_HELP_1 You can use the following %u commands: -CMD_HELP_2 To reference the usage for each command, input ""command name ?"" to view a help. +CMD_HELP_2 To reference the usage for each command, input "command name ?" to view a help. CMD_EVAL_MIN_MAX You must specify an integer in the range from %u to %u for the value. CMD_PROMPT Enter a value: CMD_EVAL_NOT_EMPTY You cannot make a blank specification. CMD_EVAL_SAFE The string contains unusable characters. CMD_EVAL_INT You must specify an integer that is not less than 1. -CMD_HELP_TITLE Help for command ""%S"" +CMD_HELP_TITLE Help for command "%S" CMD_HELP_DESCRIPTION Objetivo: CMD_HELP_USAGE Uso: CMD_HELP_HELP Descrição: @@ -4063,13 +4062,13 @@ CMD_EVAL_PORT Port number is invalid. Specify a port number that is within the r CMD_CT_STD_COLUMN_1 Item CMD_CT_STD_COLUMN_2 Valor CMD_CT_STD_COLUMN_3 Descrição -CMD_PARSE_IP_SUBNET_ERROR_1_6 Specify in the format of ""IPv6 address/subnet mask"". \nSpecify the IPv6 address by separating the hexadecimal values using colons such as ""2001:200:0:1::"". For the subnet mask, either specify hexadecimal values separated by colons such as ""ffff:ffff:ffff:ffff::"", or you can specify the bit length of subnet mask using a decimal value such as 64. \nTo specify a standalone host, specify the subnet mask as either ""ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff"" or ""128"". \n(Example)\n2001:200:0:1::/64\n2001:200:0:1::/ffff:ffff:ffff:ffff::\n2001:200:0:1::5/12\n\n -CMD_PARSE_IP_SUBNET_ERROR_1 Specify in the format of ""IPv4 address/subnet mask"". \nSpecify the IPv4 address by separating the decimal values using dots such as ""192.168.0.1"". For the subnet mask, either specify decimal values separated by dots such as ""255.255.255.0"", or you can specify the bit length of subnet mask using a decimal value such as 24. \nTo specify a standalone host, specify the subnet mask as either ""255.255.255.255"" or ""32"". \n(Example)\n 192.168.0.1/24\n 192.168.0.1/255.255.255.0\n192.168.0.5/255.255.255.255\n\n +CMD_PARSE_IP_SUBNET_ERROR_1_6 Specify in the format of "IPv6 address/subnet mask". \nSpecify the IPv6 address by separating the hexadecimal values using colons such as "2001:200:0:1::". For the subnet mask, either specify hexadecimal values separated by colons such as "ffff:ffff:ffff:ffff::", or you can specify the bit length of subnet mask using a decimal value such as 64. \nTo specify a standalone host, specify the subnet mask as either "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff" or "128". \n(Example)\n2001:200:0:1::/64\n2001:200:0:1::/ffff:ffff:ffff:ffff::\n2001:200:0:1::5/12\n\n +CMD_PARSE_IP_SUBNET_ERROR_1 Specify in the format of "IPv4 address/subnet mask". \nSpecify the IPv4 address by separating the decimal values using dots such as "192.168.0.1". For the subnet mask, either specify decimal values separated by dots such as "255.255.255.0", or you can specify the bit length of subnet mask using a decimal value such as 24. \nTo specify a standalone host, specify the subnet mask as either "255.255.255.255" or "32". \n(Example)\n 192.168.0.1/24\n 192.168.0.1/255.255.255.0\n192.168.0.5/255.255.255.255\n\n CMD_PARSE_IP_SUBNET_ERROR_2 The specified IP address is not a network address. CMD_PARSE_IP_SUBNET_ERROR_3 The specified IP address is not a network prefix address. -CMD_EVAL_DATE_TIME_FAILED The date and time specification is invalid. \nThe date and time must be in the same format as ""2005/10/08 19:30:00"" where 6 integers are specified, representing year/month/day hour:minute:second separated by forward slashes, a space and then colons. Specify 4 digits for the year. -CMD_PARSE_IP_MASK_ERROR_1_6 Specify in the format of ""IPv6 address/mask"". \nSpecify the IPv6 address by separating the hexadecimal values using colons such as ""2001:200:0:1::"". For the mask, either specify hexadecimal values separated by colons such as ""ffff:ffff:ffff:ffff::"", or you can specify the bit length of mask using a decimal value such as 64. \nTo specify a standalone host, specify the mask as either ""ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff"" or ""128"". \n(Example)\n2001:200:0:1::/64\n2001:200:0:1::/ffff:ffff:ffff:ffff::\n2001:200:0:1::5/12\n\n -CMD_PARSE_IP_MASK_ERROR_1 Specify in the format of ""IPv4 address/mask"". \nSpecify the IPv4 address by separating the decimal values using dots such as ""192.168.0.1"". For the mask, either specify decimal values separated by dots such as ""255.255.255.0"", or you can specify the bit length of mask using a decimal value such as 24. \nTo specify a standalone host, specify the mask as either ""255.255.255.255"" or ""32"". \n(Example)\n 192.168.0.1/24\n 192.168.0.1/255.255.255.0\n192.168.0.5/255.255.255.255\n\n +CMD_EVAL_DATE_TIME_FAILED The date and time specification is invalid. \nThe date and time must be in the same format as "2005/10/08 19:30:00" where 6 integers are specified, representing year/month/day hour:minute:second separated by forward slashes, a space and then colons. Specify 4 digits for the year. +CMD_PARSE_IP_MASK_ERROR_1_6 Specify in the format of "IPv6 address/mask". \nSpecify the IPv6 address by separating the hexadecimal values using colons such as "2001:200:0:1::". For the mask, either specify hexadecimal values separated by colons such as "ffff:ffff:ffff:ffff::", or you can specify the bit length of mask using a decimal value such as 64. \nTo specify a standalone host, specify the mask as either "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff" or "128". \n(Example)\n2001:200:0:1::/64\n2001:200:0:1::/ffff:ffff:ffff:ffff::\n2001:200:0:1::5/12\n\n +CMD_PARSE_IP_MASK_ERROR_1 Specify in the format of "IPv4 address/mask". \nSpecify the IPv4 address by separating the decimal values using dots such as "192.168.0.1". For the mask, either specify decimal values separated by dots such as "255.255.255.0", or you can specify the bit length of mask using a decimal value such as 24. \nTo specify a standalone host, specify the mask as either "255.255.255.255" or "32". \n(Example)\n 192.168.0.1/24\n 192.168.0.1/255.255.255.0\n192.168.0.5/255.255.255.255\n\n # Common messages @@ -4117,8 +4116,8 @@ CMD_DEBUG_NOT_2000 Windows 2000 or later is required. CMD_DEBUG_NOT_ADMIN You must login as Administrators on Windows to execute this command. CMD_DEBUG_UAC_FAILED Failed to obtain the Administrators privilege. CMD_DEBUG_SAVE_TITLE Specify Destination Path to Save File -CMD_DEBUG_OK A debugging information file was saved as ""%s"".\r\n\r\nSend this file to your support staff.\r\nYou must verify the contents of this file before sending it to the support staff.\r\nRemove confidential information on this file with your responsibility and by yourself if there are some confidential information which you don't want to disclose it to the staff.\r\n\r\nIf you ignore the confidential information contained on the file, and you agree to send the entire file to the support staff, it means that you have agreed to disclose the entire contents of the file to the support staff. -CMD_DEBUG_NG Failed to save the debugging information as ""%s"". +CMD_DEBUG_OK A debugging information file was saved as "%s".\r\n\r\nSend this file to your support staff.\r\nYou must verify the contents of this file before sending it to the support staff.\r\nRemove confidential information on this file with your responsibility and by yourself if there are some confidential information which you don't want to disclose it to the staff.\r\n\r\nIf you ignore the confidential information contained on the file, and you agree to send the entire file to the support staff, it means that you have agreed to disclose the entire contents of the file to the support staff. +CMD_DEBUG_NG Failed to save the debugging information as "%s". # TEST command @@ -4131,14 +4130,14 @@ CMD_TEST_A3 Specify a numeric value. You must specify an integer that is within CMD_TEST_EVAL_A2 You cannot make a blank specification for parameter A2. CMD_IP_EVAL_FAILED The IP address is incorrectly specified. CMD_HOSTPORT_EVAL_FAILED The host name and port number specification is invalid. \nPlease specify using the format of host name:port number, or IP address:port number. -CMD_PORTLIST_EVAL_FAILED The port number list specification is invalid. \nThe list must have at least one port number set, and it is also possible to set multiple port numbers. When specifying multiple port numbers, separate them using a comma such as ""443,992,8888"". +CMD_PORTLIST_EVAL_FAILED The port number list specification is invalid. \nThe list must have at least one port number set, and it is also possible to set multiple port numbers. When specifying multiple port numbers, separate them using a comma such as "443,992,8888". CMD_PROTOCOL_EVAL_FAILED The protocol is incorrectly specified. Specify either ip, tcp, udp, icmpv4, icmpv6 or a protocol number (0 to 255) for the protocol. -CMD_PORT_RANGE_EVAL_FAILED The port number or the port number range was incorrectly specified. If specifying only one port number, an integer must be used to specify that port number. If specifying multiple ports, specify the beginning port number and the end port number joined together by a hyphen like ""80-443"". -CMD_TCP_CONNECTION_STATE_EVAL_FAILED The TCP connection state specification is invalid. Specify either ""Established"" or ""Unestablished"" and specify TCP when selecting protocol. -CMD_MAC_ADDRESS_AND_MASK_EVAL_FAILED The MAC address and mask specification is invalid. Use hexadecimal number with the separators, ""-"" or "":"", and without the separators. An example is ""00-AC-84-EA-33-BC/FF-FF-FF-FF-FF-FF"". +CMD_PORT_RANGE_EVAL_FAILED The port number or the port number range was incorrectly specified. If specifying only one port number, an integer must be used to specify that port number. If specifying multiple ports, specify the beginning port number and the end port number joined together by a hyphen like "80-443". +CMD_TCP_CONNECTION_STATE_EVAL_FAILED The TCP connection state specification is invalid. Specify either "Established" or "Unestablished" and specify TCP when selecting protocol. +CMD_MAC_ADDRESS_AND_MASK_EVAL_FAILED The MAC address and mask specification is invalid. Use hexadecimal number with the separators, "-" or ":", and without the separators. An example is "00-AC-84-EA-33-BC/FF-FF-FF-FF-FF-FF". CMD_EXEC_MSG_NAME %S comando - %s CMD_ID ID -CMD_FILE_NOT_FOUND Cannot find specified file ""%s"". +CMD_FILE_NOT_FOUND Cannot find specified file "%s". CMD_FILE_NAME_EMPTY The file name is not specified. CMD_SAVECERTPATH Save X.509 certificate to file name: CMD_SAVECERT_FAILED Failed to save the certificate file. @@ -4156,18 +4155,18 @@ CMD_LOADKEY_ENCRYPTED_3 The passphrase is incorrect. CMD_KEYPAIR_FAILED The X.509 certificate and private key combination has been incorrectly specified. \r\nA certificate and a private key that corresponds to that certificate is required. CMD_CERT_NOT_EXISTS The certificate is not registered. CMD_NO_SETTINGS - -CMD_DISCONNECTED_MSG \n--- Error ---\n\nThe communication session with the host you were managing has been disconnected. From now on, if you run any commands an error will occur. \n\nTo reconnect to the host you were managing, first leave the prompt by inputting ""EXIT"" and then reconnect. \n\n +CMD_DISCONNECTED_MSG \n--- Error ---\n\nThe communication session with the host you were managing has been disconnected. From now on, if you run any commands an error will occur. \n\nTo reconnect to the host you were managing, first leave the prompt by inputting "EXIT" and then reconnect. \n\n # VPNCMD コマンド CMD_VPNCMD SoftEther VPN Command Line Management Utility Developer Edition CMD_VPNCMD_HELP The 'vpncmd' program is a utility that allows you to manage SoftEther VPN software by using command lines. By using vpncmd, you can connect to a VPN Client, a VPN Server or VPN Bridge that is running on a local or remote computer and manage these services. Moreover, by using VPN Tools mode, you can call the Network Traffic Speed Test Tool and the certificate creation function. These can be used even when not connected to the VPN Server or VPN Client. \nWhen using vpncmd, if the file name is specified by using the /IN and /OUT parameter, the command can be executed in a batch according to a file in which the executable commands are enumerated and the execution results can be written to a file. Normally a command prompt will appear after vpncmd is launched but when an input file is specified by the /IN parameter, the program will automatically terminate after the execution of all lines in the input file is complete. Also, when a command to execute is specified by the /CMD parameter, the program will automatically terminate after the execution of that command is complete. You cannot specify the /IN parameter and the /CMD parameter at the same time. The termination code of the vpncmd program will be the error code of the last executed command (0 in the case of successful execution). \nUnder a Windows environment, when vpncmd is launched once or more by a user with administrator privileges, it is possible to simply input 'vpncmd' to a Windows command prompt or [Run...] window to launch vpncmd. To achieve the same result under a UNIX system, you can manually set, as appropriate, the PATH environment variable. CMD_VPNCMD_ARGS vpncmd [host:port] [/CLIENT|/SERVER|/TOOLS] [/HUB:hub] [/ADMINHUB:adminhub] [/PASSWORD:password] [/IN:infile] [/OUT:outfile] [/CMD commands...] -CMD_VPNCMD_[host:port] By specifying parameters in the format ""host name:port number"", a connection will automatically be made to that host. If this is not specified, a prompt will appear to input the connection destination. When connecting to a VPN Client, you cannot specify a port number. +CMD_VPNCMD_[host:port] By specifying parameters in the format "host name:port number", a connection will automatically be made to that host. If this is not specified, a prompt will appear to input the connection destination. When connecting to a VPN Client, you cannot specify a port number. CMD_VPNCMD_CLIENT This will connect to VPN Client to do management. You cannot specify it together with /SERVER. CMD_VPNCMD_SERVER This will connect to VPN Server or VPN Bridge to do management. You cannot specify it together with /CLIENT. CMD_VPNCMD_TOOLS This will enables use of VPN Tools commands. VPN Tools include the simple certificate creation tool (MakeCert command) and the Network Traffic Speed Test Tool (SpeedTest command). -CMD_VPNCMD_HUB When connecting to the VPN Server by ""Virtual Hub Admin Mode"", this specifies the Virtual Hub name 'hub'. If you specify the host name but not the /HUB parameter, connection will be by ""Server Admin Mode"". +CMD_VPNCMD_HUB When connecting to the VPN Server by "Virtual Hub Admin Mode", this specifies the Virtual Hub name 'hub'. If you specify the host name but not the /HUB parameter, connection will be by "Server Admin Mode". CMD_VPNCMD_ADMINHUB This will specify the name of the Virtual Hub 'adminhub' that is automatically selected after connecting to the VPN Server. If the /HUB parameter was specified, the Virtual Hub will be selected automatically and this specification will not be necessary. CMD_VPNCMD_PASSWORD If the administrator password is required when connecting, specify the password 'password'. When the password is not specified, a prompt to input the password will be displayed. CMD_VPNCMD_IN This will specify the text file 'infile' that contains the list of commands that are automatically executed after the connection is completed. If the /IN parameter is specified, the vpncmd program will terminate automatically after the execution of all commands in the file are finished. If the file contains multiple-byte characters, the encoding must be Unicode (UTF-8). This cannot be specified together with /CMD (if /CMD is specified, /IN will be ignored). @@ -4185,7 +4184,7 @@ CMD_VPNCMD_ABOUT SoftEther VPN Command Line Management Utility (vpncmd command)\ CMD_VPNCMD_PASSWORD_1 Access has been denied. Possibly the password is incorrect, or perhaps you are connecting by an incorrect admin mode. You can try inputting the password again. To cancel, press Ctrl+D. CMD_VPNCMD_PASSWORD_2 Senha: CMD_VPNCMD_ERROR Error occurred. (Error code: %u)\n%s -CMD_VPNCMD_SERVER_CONNECTED Connection has been established with VPN Server ""%S"" (port %u). +CMD_VPNCMD_SERVER_CONNECTED Connection has been established with VPN Server "%S" (port %u). CMD_VPNCMD_SERVER_CONNECTED_1 You have administrator privileges for the entire VPN Server. CMD_VPNCMD_SERVER_CONNECTED_2 You have administrator privileges for Virtual Hub '%S' on the VPN Server. CMD_VPNCMD_CLIENT_NO_REMODE The destination VPN Client server does not allow administrating connections from remote computers. Launch the command line management utility or VPN Client Manager on the computer that VPN Client is running on and connect to localhost. @@ -4193,7 +4192,7 @@ CMD_VPNCMD_PWPROMPT_0 Please enter the password. To cancel press the Ctrl+D key. CMD_VPNCMD_PWPROMPT_1 Senha: CMD_VPNCMD_PWPROMPT_2 Confirm input: CMD_VPNCMD_PWPROMPT_3 The password and the password confirmation do not match. Please input the password and confirmation again. -CMD_VPNCMD_CLIENT_CONNECTED Connected to VPN Client ""%S"". +CMD_VPNCMD_CLIENT_CONNECTED Connected to VPN Client "%S". CMD_VPNCMD_TOOLS_CONNECTED VPN Tools has been launched. By inputting HELP, you can view a list of the commands that can be used. @@ -4301,7 +4300,7 @@ CMD_ClusterSettingController Set VPN Server Type as Cluster Controller CMD_ClusterSettingController_Help Use this to set the VPN Server type as Cluster Controller. A cluster controller is the central computer of all member servers of a cluster in the case where a clustering environment is made up of multiple VPN Servers. A cluster requires one computer to serve this role. The other cluster member servers that are configured in the same cluster begin operation as a cluster member by connecting to the cluster controller. \nTo execute this command, you must have VPN Server administrator privileges. \nAlso, when this command is executed, VPN Server will automatically restart. \nThis command cannot be run on VPN Bridge. CMD_ClusterSettingController_Args ClusterSettingController [/WEIGHT:weight] [/ONLY:yes|no] CMD_ClusterSettingController_WEIGHT This sets a value for the performance standard ratio of this VPN Server. This is the standard value for when load balancing is performed in the cluster. Normally it is 100. For example, making only one machine 200 while the other members have a status of 100, will regulate that machine to receive twice as many connections as the other members during load balancing. Specify 1 or higher for the value. If this parameter is left unspecified, 100 will be used. -CMD_ClusterSettingController_ONLY By specifying ""yes"" here, the VPN Server will operate only as a controller on the cluster and it will always distribute general VPN Client connections to members other than itself. This function is used in high-load environments. If this parameter is left unspecified, ""no"" will be used. +CMD_ClusterSettingController_ONLY By specifying "yes" here, the VPN Server will operate only as a controller on the cluster and it will always distribute general VPN Client connections to members other than itself. This function is used in high-load environments. If this parameter is left unspecified, "no" will be used. # ClusterSettingMember command @@ -4309,8 +4308,8 @@ CMD_ClusterSettingMember Set VPN Server Type as Cluster Member CMD_ClusterSettingMember_Help Use this to set the VPN Server type as Cluster Member Server. A cluster member server is a member computer belonging to a clustering configuration made up of multiple VPN Servers with another existing cluster controller as the center. Multiple cluster members can be added to the cluster as required. \nBefore setting the VPN Server as a cluster member server, first ask the administrator of the cluster controller to be used for the controller's IP address and port number, the public IP address and public port number (when required) of this VPN Server and the password. \nTo execute this command, you must have VPN Server administrator privileges. \nAlso, when this command is executed, VPN Server will automatically restart. \nThis command cannot be run on VPN Bridge. CMD_ClusterSettingMember_Args ClusterSettingMember [server:port] [/IP:ip] [/PORTS:ports] [/PASSWORD:password] [/WEIGHT:weight] CMD_ClusterSettingMember_[server:port] Specify the host name or IP address, and port number of the destination cluster controller using the parameter with the format host name:port number. -CMD_ClusterSettingMember_IP Specify the public IP address of this server. If you wish to leave public IP address unspecified, specify it like this: ""/IP:none"". When a public IP address is not specified, the IP address of the network interface used when connecting to the cluster controller will be automatically used. -CMD_ClusterSettingMember_PORTS Use this to specify the list of public port numbers on this server. The list must have at least one public port number set, and it is also possible to set multiple public port numbers. When specifying multiple port numbers, separate them using a comma such as ""/PORTS443,992,8888"". +CMD_ClusterSettingMember_IP Specify the public IP address of this server. If you wish to leave public IP address unspecified, specify it like this: "/IP:none". When a public IP address is not specified, the IP address of the network interface used when connecting to the cluster controller will be automatically used. +CMD_ClusterSettingMember_PORTS Use this to specify the list of public port numbers on this server. The list must have at least one public port number set, and it is also possible to set multiple public port numbers. When specifying multiple port numbers, separate them using a comma such as "/PORTS443,992,8888". CMD_ClusterSettingMember_PASSWORD Specify the password required to connect to the destination controller. It needs to be the same as an administrator password on the destination controller. CMD_ClusterSettingMember_WEIGHT This sets a value for the performance standard ratio of this VPN Server. This is the standard value for when load balancing is performed in the cluster. For example, making only one machine 200 while the other members have a status of 100, will regulate that machine to receive twice as many connections as the other members. Specify 1 or higher for the value. If this parameter is left unspecified, 100 will be used. CMD_ClusterSettingMember_Prompt_IP_1 Specify a public IP address. \nIf you wish to leave this unspecified, press Enter without inputting anything. @@ -4354,18 +4353,18 @@ CMD_Debug Execute a Debug Command CMD_Debug_Help Runs a debug command on the running VPN Server / Bridge process.\nThis command should be executed wjen the support staff requests to do so.\nMisuse of this command might cause a crash of VPN Server / Bridge running. CMD_Debug_Args Debug [id] [/ARG:arg] CMD_Debug_[id] Specify a debug command number. -CMD_Debug_ARG Specify a string to pass to the debug command. If a string contains spaces, contains the whole command by "" "". +CMD_Debug_ARG Specify a string to pass to the debug command. If a string contains spaces, contains the whole command by " ". CMD_Debug_Msg1 Sending the debug command... -CMD_Debug_Msg2 The debug command has executed.\nResults: \""%S\"" +CMD_Debug_Msg2 The debug command has executed.\nResults: \"%S\" # Crash command CMD_Crash Raise a error on the VPN Server / Bridge to terminate the process forcefully. CMD_Crash_Help This command will raise a fatal error (memory access violation) on the VPN Server / Bridge running process in order to crash the process. As the result, VPN Server / Bridge will be terminated and restarted if it is running as a service mode. If the VPN Server is running as a user mode, the process will not automatically restarted.\nThis command is for a situation when the VPN Server / Bridge is under a non-recoverable error or the process is in an infinite loop. This command will disconnect all VPN Sessions on the VPN Server / Bridge. All unsaved settings in the memory of VPN Server / Bridge will be lost.\nBefore run this command, run the Flush command to try to save volatile data to the configuration file.\nTo execute this command, you must have VPN Server / VPN Bridge administrator privileges. CMD_Crash_Args Crash [yes] -CMD_Crash_[yes] Input ""yes"" for confirmation. +CMD_Crash_[yes] Input "yes" for confirmation. CMD_Crash_Msg Sending the Crush command to the VPN Server. The VPN Server will be let to crash immediately, so you can never get the result value of this command. After this moment, vpncmd will be disconnected from the VPN Server. -CMD_Crash_Confirm Do you really want to crash the VPN Server?\nInput ""yes"" if it is ok: +CMD_Crash_Confirm Do you really want to crash the VPN Server?\nInput "yes" if it is ok: CMD_Crash_Aborted The Crash command has been aborted. @@ -4450,13 +4449,13 @@ CMD_KeepDisable_Args KeepDisable CMD_KeepSet Set the Keep Alive Internet Connection Function CMD_KeepSet_Help Use this to set the destination host name etc. of the Keep Alive Internet Connection Function. For network connection environments where connections will automatically be disconnected where there are periods of no communication that are longer than a set period, by using the Keep Alive Internet Connection Function, it is possible to keep alive the Internet connection by sending packets to a nominated server on the Internet at set intervals. \nWhen using this command, you can specify the following: Host Name, Port Number, Packet Send Interval, and Protocol. \nPackets sent to keep alive the Internet connection will have random content and personal information that could identify a computer or user is not sent. \nYou can use the KeepEnable command or KeepDisable command to enable/disable the Keep Alive Internet Connection Function. KeepSet does not change the enabled/disabled status. \nTo execute this command on a VPN Server or VPN Bridge, you must have administrator privileges. CMD_KeepSet_Args KeepSet [/HOST:host:port] [/PROTOCOL:tcp|udp] [/INTERVAL:interval] -CMD_KeepSet_HOST Specify the host name or IP address, and port number of the destination using the format ""host name:port number"". +CMD_KeepSet_HOST Specify the host name or IP address, and port number of the destination using the format "host name:port number". CMD_KeepSet_PROTOCOL Specify either tcp or udp. CMD_KeepSet_INTERVAL Specify, in seconds, the interval between the sending of packets. CMD_KeepSet_PROMPT_HOST Destination Host Name/IP Address and Port Number: CMD_KeepSet_PROMPT_PROTOCOL TCP ou UDP: CMD_KeepSet_PROMPT_INTERVAL Interval Between Packets Sends (Seconds): -CMD_KeepSet_EVAL_TCP_UDP Please specify ""tcp"" or ""udp"". +CMD_KeepSet_EVAL_TCP_UDP Please specify "tcp" or "udp". # KeepGet command @@ -4570,7 +4569,7 @@ CMD_ConfigGet Get the current configuration of the VPN Server CMD_ConfigGet_Help Use this to get a text file (.config file) that contains the current configuration contents of the VPN server. You can get the status on the VPN Server at the instant this command is executed. \nWhen part of the contents of the configuration file does not specify a parameter, it will be displayed on screen as it is. By specifying a save destination file name by parameter, the contents will be saved by that file name. \nYou can edit the configuration file by using a regular text editor. To write an edited configuration to the VPN Server, use the ConfigSet command. \nTo execute this command, you must have VPN Server administrator privileges. CMD_ConfigGet_Args ConfigGet [path] CMD_ConfigGet_[path] When you want to save the contents of the configuration file to a file, use this to specify the file name. If left unspecified, the configuration contents will be displayed on screen. If the configuration file contains multiple-byte characters, the encoding must be saved as Unicode (UTF-8). -CMD_ConfigGet_FILENAME Config name: ""%S"", Size: %u +CMD_ConfigGet_FILENAME Config name: "%S", Size: %u CMD_ConfigGet_FILE_SAVE_FAILED Creation of specified file failed. @@ -4635,7 +4634,7 @@ CMD_RouterIfAdd_Help Use this to add to a specified Virtual Layer 3 Switch, a vi CMD_RouterIfAdd_Args RouterIfAdd [name] [/HUB:hub] [/IP:ip/mask] CMD_RouterIfAdd_[name] Use this to specify the name of the Virtual Layer 3 Switch. CMD_RouterIfAdd_HUB Use this to specify the name of the Virtual Hub to be the connection destination of the virtual interface to be newly added. To get a list of Virtual Hubs, you can use the HubList command. It is not essential that you specify a Virtual Hub that is currently operating. If you specify a Virtual Hub name that is not currently operating or that does not exist, the Virtual Layer 3 Switch will become enabled when the actual operation of that Virtual Hub begins. -CMD_RouterIfAdd_IP Using the format: ""IP address/subnet mask"", specify the IP address and subnet mask held by the virtual interface to be newly added. Specify the IP address by separating the decimal values using dots such as 192.168.0.1 For the subnet mask, either specify decimal values separated by dots such as 255.255.255.0, or you can specify the bit length from the header using a decimal value such as 24. +CMD_RouterIfAdd_IP Using the format: "IP address/subnet mask", specify the IP address and subnet mask held by the virtual interface to be newly added. Specify the IP address by separating the decimal values using dots such as 192.168.0.1 For the subnet mask, either specify decimal values separated by dots such as 255.255.255.0, or you can specify the bit length from the header using a decimal value such as 24. CMD_RouterIfAdd_PROMPT_NAME Nome do Virtual Layer 3 Switch: CMD_RouterIfAdd_PROMPT_HUB Destination Virtual Hub Name of Virtual Interface: CMD_RouterIfAdd_PROMPT_IP IP Address/Subnet Mask: @@ -4662,7 +4661,7 @@ CMD_RouterTableAdd Add Routing Table Entry for Virtual Layer 3 Switch CMD_RouterTableAdd_Help Here you can add a new routing table entry to the routing table of the specified Virtual Layer 3 Switch. \nIf the destination IP address of the IP packet does not belong to any IP network that belongs to a virtual interface, the IP routing engine of the Virtual Layer 3 Switch will reference the routing table and execute routing. \nYou must specify the contents of the routing table entry to be added to the Virtual Layer 3 Switch. You must specify any IP address that belongs to the same IP network in the virtual interface of this Virtual Layer 3 Switch as the gateway address. \nTo execute this command, you must have VPN Server administrator privileges. \nAlso, this command does not operate on VPN Bridge. \nTo execute this command, the target Virtual Layer 3 Switch must be stopped. If it is not stopped, first use the RouterStop command to stop it and then execute this command. CMD_RouterTableAdd_Args RouterTableAdd [name] [/NETWORK:ip/mask] [/GATEWAY:gwip] [/METRIC:metric] CMD_RouterTableAdd_[name] Use this to specify the name of the Virtual Layer 3 Switch. -CMD_RouterTableAdd_NETWORK Using the format: ""IP address/subnet mask"", specify the network address and subnet mask of the routing table entry to be newly added. Specify the network address by separating the decimal values using dots such as ""192.168.0.1"". For the subnet mask, either specify decimal values separated by dots such as 255.255.255.0, or you can specify the bit length from the header using a decimal value such as 24. If you specify 0.0.0.0/0.0.0.0, the default route will be used. +CMD_RouterTableAdd_NETWORK Using the format: "IP address/subnet mask", specify the network address and subnet mask of the routing table entry to be newly added. Specify the network address by separating the decimal values using dots such as "192.168.0.1". For the subnet mask, either specify decimal values separated by dots such as 255.255.255.0, or you can specify the bit length from the header using a decimal value such as 24. If you specify 0.0.0.0/0.0.0.0, the default route will be used. CMD_RouterTableAdd_GATEWAY Especifique o endereço IP do gateway. CMD_RouterTableAdd_METRIC Specify a metric value. Specify an integer (1 or higher). CMD_RouterTableAdd_PROMPT_NAME Nome do Virtual Layer 3 Switch: @@ -4676,7 +4675,7 @@ CMD_RouterTableDel Delete Routing Table Entry of Virtual Layer 3 Switch CMD_RouterTableDel_Help Use this to delete a routing table entry that is defined in the specified Virtual Layer 3 Switch. \nYou can get a list of the already defined routing table entries by using the RouterTableList command. \nTo execute this command, you must have VPN Server administrator privileges. \nAlso, this command does not operate on VPN Bridge. \nTo execute this command, the target Virtual Layer 3 Switch must be stopped. If it is not stopped, first use the RouterStop command to stop it and then execute this command. CMD_RouterTableDel_Args RouterTableDel [name] [/NETWORK:ip/mask] [/GATEWAY:gwip] [/METRIC:metric] CMD_RouterTableDel_[name] Use this to specify the name of the Virtual Layer 3 Switch. -CMD_RouterTableDel_NETWORK Using the format: ""IP address/subnet mask"", specify the network address of the routing table entry to be deleted. +CMD_RouterTableDel_NETWORK Using the format: "IP address/subnet mask", specify the network address of the routing table entry to be deleted. CMD_RouterTableDel_GATEWAY Especifique o endereço IP do gateway. CMD_RouterTableDel_METRIC Specify a metric value. Specify an integer (1 or higher). @@ -4759,12 +4758,12 @@ CMD_HubList_Args ListaHub # Hub command CMD_Hub Select Virtual Hub to Manage -CMD_Hub_Help Use this to select the Virtual Hub to be the target of administration. For an administration utility with the status of being connected to a VPN Server, before executing a command to set or manage a Virtual Hub, you must use the Hub command to select the Virtual Hub to manage. \nWhen in the status of being connected to a VPN Server in Virtual Hub Admin Mode, you can select a single Virtual Hub to be the target of administration but you cannot select other Virtual Hubs. When having the status of being connected to the VPN Server in Server Admin Mode, you can make all Virtual Hubs the target of administration. \nTo get a list of Virtual Hubs that currently exist on the VPN Server, use the HubList command. \nFor the VPN Bridge, you can only select the Virtual Hub that has the name ""BRIDGE"". +CMD_Hub_Help Use this to select the Virtual Hub to be the target of administration. For an administration utility with the status of being connected to a VPN Server, before executing a command to set or manage a Virtual Hub, you must use the Hub command to select the Virtual Hub to manage. \nWhen in the status of being connected to a VPN Server in Virtual Hub Admin Mode, you can select a single Virtual Hub to be the target of administration but you cannot select other Virtual Hubs. When having the status of being connected to the VPN Server in Server Admin Mode, you can make all Virtual Hubs the target of administration. \nTo get a list of Virtual Hubs that currently exist on the VPN Server, use the HubList command. \nFor the VPN Bridge, you can only select the Virtual Hub that has the name "BRIDGE". CMD_Hub_Args Hub [nome] CMD_Hub_[name] Specify the name of the Virtual Hub to manage. If this parameter is left unspecified, the Select Virtual Hub to Manage will be cancelled. CMD_Hub_Unselected The Virtual Hub selection has been unselected. -CMD_Hub_Selected The Virtual Hub ""%S"" has been selected. -CMD_Hub_Select_Failed When attempting to select Virtual Hub ""%S"" that has been specified by /ADMINHUB, the following error occurred. +CMD_Hub_Selected The Virtual Hub "%S" has been selected. +CMD_Hub_Select_Failed When attempting to select Virtual Hub "%S" that has been specified by /ADMINHUB, the following error occurred. CMD_Hub_Not_Selected Before executing this command, first select the Virtual Hub to manage using the Hub command. @@ -4790,7 +4789,7 @@ CMD_SetMaxSession_Prompt Max Number of Sessions: # SetHubPassword command CMD_SetHubPassword Set Virtual Hub Administrator Password -CMD_SetHubPassword_Help Use this to set the Administrator Password for the Virtual Hub that is currently being managed. When a Virtual Hub administrator password has been set, you are able to connect to that Virtual Hub from a VPN Server connection utility in Virtual Hub Admin Mode, by specifying the password. It is also possible to make a VPN connection from a VPN client or VPN Bridge by specifying ""Administrator"" for the user name and the password for the Virtual Hub administrator password. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. +CMD_SetHubPassword_Help Use this to set the Administrator Password for the Virtual Hub that is currently being managed. When a Virtual Hub administrator password has been set, you are able to connect to that Virtual Hub from a VPN Server connection utility in Virtual Hub Admin Mode, by specifying the password. It is also possible to make a VPN connection from a VPN client or VPN Bridge by specifying "Administrator" for the user name and the password for the Virtual Hub administrator password. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_SetHubPassword_Args SetHubPassword [password] CMD_SetHubPassword_[password] Specify the password you wish to set. If a password is not specified by parameter, a prompt will appear to input the password. @@ -4811,7 +4810,7 @@ CMD_SetEnumDeny_Args SetEnumDeny CMD_OptionsGet Get Options Setting of Virtual Hubs CMD_OptionsGet_Help Use this to get a list of the Options setting of the Virtual Hub currently being managed. You can get the following: Allow/Deny Virtual Hub Enumeration, Maximum Concurrent Connections, Online/Offline Status, and Virtual Hub Type in Clustering Environment. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_OptionsGet_Args OptionsGet -CMD_OptionsGet_TITLE Options Setting List of Virtual Hub ""%S"" +CMD_OptionsGet_TITLE Options Setting List of Virtual Hub "%S" CMD_OptionsGet_ENUM Enumeration of Virtual Hub for Anonymous User CMD_OptionsGet_MAXSESSIONS Max Number of Sessions CMD_OptionsGet_STATUS Status @@ -4822,7 +4821,7 @@ CMD_OptionsGet_TYPE Virtual Hub Type CMD_RadiusServerSet Set RADIUS Server to use for User Authentication CMD_RadiusServerSet_Help To accept users to the currently managed Virtual Hub in RADIUS server authentication mode, you can specify an external RADIUS server that confirms the user name and password. (You can specify multiple hostname by splitting with comma or semicolon.) \nThe RADIUS server must be set to receive requests from IP addresses of this VPN Server. Also, authentication by Password Authentication Protocol (PAP) must be enabled. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_RadiusServerSet_Args RadiusServerSet [server_name:port] [/SECRET:secret] [/RETRY_INTERVAL:interval] -CMD_RadiusServerSet_[server_name:port] Using the format ""host name:port number"", specify the host name or IP address, and the UDP port number of the RADIUS server being used. If the port number is omitted, 1812 will be used. You can specify multiple hostname by splitting with comma or semicolon. +CMD_RadiusServerSet_[server_name:port] Using the format "host name:port number", specify the host name or IP address, and the UDP port number of the RADIUS server being used. If the port number is omitted, 1812 will be used. You can specify multiple hostname by splitting with comma or semicolon. CMD_RadiusServerSet_SECRET Specify the shared secret (password) used for communication with the RADIUS Server CMD_RadiusServerSet_RETRY_INTERVAL Specify the retry interval between retries in milliseconds. CMD_RadiusServerSet_Prompt_Host Host Number and Port Number of RADIUS Server to Use: @@ -4875,7 +4874,7 @@ CMD_Log_7 Log Ethernet CMD_LogEnable Enable Security Log or Packet Log CMD_LogEnable_Help Use this to enable a security log or packet log of the Virtual Hub currently being managed. \nTo get the current setting, you can use the LogGet command. CMD_LogEnable_Args LogEnable [security|packet] -CMD_LogEnable_[security|packet] Select the type of log to enable. Specify either ""security"" or ""packet"". +CMD_LogEnable_[security|packet] Select the type of log to enable. Specify either "security" or "packet". CMD_LogEnable_Prompt Select Security or Packet: CMD_LogEnable_Prompt_Error Invalid specification. @@ -4884,14 +4883,14 @@ CMD_LogEnable_Prompt_Error Invalid specification. CMD_LogDisable Disable Security Log or Packet Log CMD_LogDisable_Help Use this to disable a security log or packet log of the Virtual Hub currently being managed. \nTo get the current setting, you can use the LogGet command. CMD_LogDisable_Args LogDisable [security|packet] -CMD_LogDisable_[security|packet] Select the type of log to disable. Specify either ""security"" or ""packet"". +CMD_LogDisable_[security|packet] Select the type of log to disable. Specify either "security" or "packet". # LogSwitchSet command CMD_LogSwitchSet Set Log File Switch Cycle CMD_LogSwitchSet_Help Use this to set the log file switch cycle for the security log or packet log that the currently managed Virtual Hub saves. The log file switch cycle can be changed to switch in every second, every minute, every hour, every day, every month ,or not switch. \nTo get the current setting, you can use the LogGet command. CMD_LogSwitchSet_Args LogSwitchSet [security|packet] [/SWITCH:sec|min|hour|day|month|none] -CMD_LogSwitchSet_[security|packet] Select the type of log to change setting. Specify either ""security"" or ""packet"". +CMD_LogSwitchSet_[security|packet] Select the type of log to change setting. Specify either "security" or "packet". CMD_LogSwitchSet_SWITCH Select the switch cycle to set. Specify sec, min, hour, day, month or none. CMD_LogSwitchSet_Prompt Specify sec, min, hour, day, month or none: @@ -4947,7 +4946,7 @@ CMD_CascadeList_Args CascadeList # CascadeCreate command CMD_CascadeCreate Create New Cascade Connection -CMD_CascadeCreate_Help Use this to create a new Cascade Connection on the currently managed Virtual Hub. \nBy using a Cascade Connection, you can connect this Virtual Hub by Cascade Connection to another Virtual Hub that is operating on the same or a different computer. \nTo create a Cascade Connection, you must specify the name of the Cascade Connection, destination server and destination Virtual Hub and user name. When a new Cascade Connection is created, the type of user authentication is initially set as Anonymous Authentication and the proxy server setting and the verification options of the server certificate is not set. To change these settings and other advanced settings after a Cascade Connection has been created, use the other commands that begin with the name ""Cascade"". \n\n[Warning About Cascade Connections]\nBy connecting using a Cascade Connection you can create a Layer 2 bridge between multiple Virtual Hubs but if the connection is incorrectly configured, a loopback Cascade Connection could inadvertently be created. When using a Cascade Connection function please design the network topology with care. \n\nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. +CMD_CascadeCreate_Help Use this to create a new Cascade Connection on the currently managed Virtual Hub. \nBy using a Cascade Connection, you can connect this Virtual Hub by Cascade Connection to another Virtual Hub that is operating on the same or a different computer. \nTo create a Cascade Connection, you must specify the name of the Cascade Connection, destination server and destination Virtual Hub and user name. When a new Cascade Connection is created, the type of user authentication is initially set as Anonymous Authentication and the proxy server setting and the verification options of the server certificate is not set. To change these settings and other advanced settings after a Cascade Connection has been created, use the other commands that begin with the name "Cascade". \n\n[Warning About Cascade Connections]\nBy connecting using a Cascade Connection you can create a Layer 2 bridge between multiple Virtual Hubs but if the connection is incorrectly configured, a loopback Cascade Connection could inadvertently be created. When using a Cascade Connection function please design the network topology with care. \n\nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_CascadeCreate_Args CascadeCreate [name] [/SERVER:hostname:port] [/HUB:hubname] [/USERNAME:username] CMD_CascadeCreate_[name] Specify the name of the Cascade Connection to create. CMD_CascadeCreate_SERVER Specify the host name and port number of the destination VPN Server using the format [host name:port number]. You can also specify by IP address. @@ -4970,7 +4969,7 @@ CMD_CascadeSet_HUB Specify the Virtual Hub on the destination VPN Server. # CascadeGet command CMD_CascadeGet Get the Cascade Connection Setting -CMD_CascadeGet_Help Use this to get the Connection Setting of a Cascade Connection that is registered on the currently managed Virtual Hub. \nTo change the Connection Setting contents of the Cascade Connection, use the other commands that begin with the name ""Cascade"" after creating the Cascade Connection. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. +CMD_CascadeGet_Help Use this to get the Connection Setting of a Cascade Connection that is registered on the currently managed Virtual Hub. \nTo change the Connection Setting contents of the Cascade Connection, use the other commands that begin with the name "Cascade" after creating the Cascade Connection. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_CascadeGet_Args CascadeGet [name] CMD_CascadeGet_[name] Specify the name of the Cascade Connection whose setting you want to get. CMD_CascadeGet_Policy [Cascade Session Security Policy Setting Value] @@ -5005,7 +5004,7 @@ CMD_CascadePasswordSet_Help When a Cascade Connection registered on the currentl CMD_CascadePasswordSet_Args CascadePasswordSet [name] [/PASSWORD:password] [/TYPE:standard|radius] CMD_CascadePasswordSet_[name] Specify the name of the Cascade Connection whose setting you want to change. CMD_CascadePasswordSet_PASSWORD Specify the password to use for password authentication. If this is not specified, a prompt will appear to input the password. -CMD_CascadePasswordSet_TYPE Specify either ""standard"" (Standard Password Authentication) or ""radius"" (RADIUS or NT Domain Authentication) as the password authentication type. +CMD_CascadePasswordSet_TYPE Specify either "standard" (Standard Password Authentication) or "radius" (RADIUS or NT Domain Authentication) as the password authentication type. CMD_CascadePasswordSet_Prompt_Type Especificar padrão ou radius: CMD_CascadePasswordSet_Type_Invalid The standard or radius specification is invalid. @@ -5109,7 +5108,7 @@ CMD_CascadeProxySocks Set Connection Method of Cascade Connection to be via a SO CMD_CascadeProxySocks_Help When a Cascade Connection registered on the currently managed Virtual Hub is specified and that Cascade Connection connects to a VPN Server, use this to set Connect via SOCKS4 Proxy Server as the method of connection to use, which requires the specification of the host name and port number of the SOCKS4 Proxy server to communicate via as well as a user name and password (when required). \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_CascadeProxySocks_Args CascadeProxySocks [name] [/SERVER:hostname:port] [/USERNAME:username] [/PASSWORD:password] CMD_CascadeProxySocks_[name] Specify the name of the Cascade Connection whose setting you want to change. -CMD_CascadeProxySocks_SERVER Specify the host name or IP address, and port number of the on-route SOCKS4 proxy server using the format ""host name:port number"". +CMD_CascadeProxySocks_SERVER Specify the host name or IP address, and port number of the on-route SOCKS4 proxy server using the format "host name:port number". CMD_CascadeProxySocks_USERNAME When user authentication is required to connect to the on-route SOCKS4 proxy server, specify the user name. Also, specify the /PASSWORD parameter at the same time. If the parameters /USERNAME and /PASSWORD are not specified, the user authentication data will not be set. CMD_CascadeProxySocks_PASSWORD When user authentication is required to connect to the on-route SOCKS4 proxy server, specify the password. Specify this together with the /USERNAME parameter. @@ -5119,7 +5118,7 @@ CMD_CascadeProxySocks5 Set Connection Method of Cascade Connection to be via a S CMD_CascadeProxySocks5_Help When a Cascade Connection registered on the currently managed Virtual Hub is specified and that Cascade Connection connects to a VPN Server, use this to set Connect via SOCKS5 Proxy Server as the method of connection to use, which requires the specification of the host name and port number of the SOCKS Proxy server to communicate via as well as a user name and password (when required). \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_CascadeProxySocks5_Args CascadeProxySocks5 [name] [/SERVER:hostname:port] [/USERNAME:username] [/PASSWORD:password] CMD_CascadeProxySocks5_[name] Specify the name of the Cascade Connection whose setting you want to change. -CMD_CascadeProxySocks5_SERVER Specify the host name or IP address, and port number of the on-route SOCKS5 proxy server using the format ""host name:port number"". +CMD_CascadeProxySocks5_SERVER Specify the host name or IP address, and port number of the on-route SOCKS5 proxy server using the format "host name:port number". CMD_CascadeProxySocks5_USERNAME When user authentication is required to connect to the on-route SOCKS5 proxy server, specify the user name. Also, specify the /PASSWORD parameter at the same time. If the parameters /USERNAME and /PASSWORD are not specified, the user authentication data will not be set. CMD_CascadeProxySocks5_PASSWORD When user authentication is required to connect to the on-route SOCKS5 proxy server, specify the password. Specify this together with the /USERNAME parameter. @@ -5169,8 +5168,8 @@ CMD_CascadeDetailSet_[name] Specify the name of the Cascade Connection whose set CMD_CascadeDetailSet_MAXTCP Specify, using an integer in the range 1 to 32, the number of TCP connections to be used for VPN communication. By using data transmission by multiple TCP connections for VPN communication sessions with VPN Servers it is sometimes possible to increase communication speed. \nNote: We recommend about 8 lines when the connection lines to the server are fast, and 1 line when using a slow connection such as dialup. CMD_CascadeDetailSet_INTERVAL When communicating by VPN by establishing multiple TCP connections, specify in seconds, the establishing interval for each TCP connection. The standard value is 1 second. CMD_CascadeDetailSet_TTL When specifying connection life of each TCP connection specify in seconds the keep-alive time from establishing a TCP connection until disconnection. If 0 is specified, keep-alive will not be set. -CMD_CascadeDetailSet_HALF Specify ""yes"" when enabling half duplex mode. When using two or more TCP connections for VPN communication, it is possible to use Half Duplex Mode. By enabling half duplex mode it is possible to automatically fix data transmission direction as half and half for each TCP connection. In the case where a VPN using 8 TCP connections is established, for example, when half-duplex is enabled, communication can be fixes so that 4 TCP connections are dedicated to the upload direction and the other 4 connections are dedicated to the download direction. -CMD_CascadeDetailSet_NOQOS Specify ""yes"" when disabling VoIP / QoS functions. Normally ""no"" is specified. +CMD_CascadeDetailSet_HALF Specify "yes" when enabling half duplex mode. When using two or more TCP connections for VPN communication, it is possible to use Half Duplex Mode. By enabling half duplex mode it is possible to automatically fix data transmission direction as half and half for each TCP connection. In the case where a VPN using 8 TCP connections is established, for example, when half-duplex is enabled, communication can be fixes so that 4 TCP connections are dedicated to the upload direction and the other 4 connections are dedicated to the download direction. +CMD_CascadeDetailSet_NOQOS Specify "yes" when disabling VoIP / QoS functions. Normally "no" is specified. CMD_CascadeDetailSet_Eval_MaxTcp Specify an integer in the range 1 to 32 for the number of TCP connections. CMD_CascadeDetailSet_Eval_Interval Set at least 1 second for the interval to establish a TCP connection. CMD_CascadeDetailSet_Prompt_MaxTcp Number of TCP Connections to Use in VPN Communication: @@ -5188,9 +5187,9 @@ CMD_CascadePolicySet_NAME Specify the name of policy whose values you want to ch CMD_CascadePolicySet_VALUE Specify a new policy value. If the policy is an integer value, specify an integer. Specify yes or no for Boolean types. You can view the type and value that can be set by using the PolicyList command. CMD_CascadePolicySet_PROMPT_POLNAME Name of Policy Whose Value you want to Change: CMD_CascadePolicySet_PROMPT_POLVALUE Value to newly set: -CMD_CascadePolicySet_Invalid_Name The specified policy name ""%S"" is invalid. \nCheck the list of policy names that can be set using the PolicyList command. -CMD_CascadePolicySet_Invalid_Name_For_Cascade The specified policy name ""%S"" cannot be used for a Cascade Connection security policy setting. -CMD_CascadePolicySet_Invalid_Range Specify policy ""%S"" within the range of %s. +CMD_CascadePolicySet_Invalid_Name The specified policy name "%S" is invalid. \nCheck the list of policy names that can be set using the PolicyList command. +CMD_CascadePolicySet_Invalid_Name_For_Cascade The specified policy name "%S" cannot be used for a Cascade Connection security policy setting. +CMD_CascadePolicySet_Invalid_Range Specify policy "%S" within the range of %s. # PolicyList command @@ -5250,22 +5249,22 @@ CMD_AccessAdd_Args AccessAdd [pass|discard] [/MEMO:memo] [/PRIORITY:priority] [/ CMD_AccessAdd_[pass|discard] When a packet matches this rule condition, this operation is decided. When pass is specified, the packet is allowed to pass, and when discard is specified, the packet is discarded. CMD_AccessAdd_MEMO Specify a description (memo) for this rule. CMD_AccessAdd_PRIORITY Specify an integer of 1 or higher to indicate the priority of the rule. Higher priority is given to rules with the lower priority values. -CMD_AccessAdd_SRCIP Specify a source IPv4 address as a rule condition. Specify the IPv4 address in the format of ""IP Address/Mask"" by separating the decimal values using dots such as ""192.168.0.1"". For the mask, either specify decimal values separated by dots such as ""255.255.255.0"", or you can specify the bit length from the header using a decimal value such as ""24"". If you specify ""0.0.0.0/0.0.0.0"", this means all hosts. -CMD_AccessAdd_DESTIP Specify a destination IPv4 address as a rule condition in the format of ""IP Address/Mask"". Use the same method of specification as for the /SRCIP parameter. -CMD_AccessAdd_PROTOCOL Specify a protocol type as a rule condition. Input the IP protocol number using decimal values or specify one of the keywords ""tcp"" (TCP/IP protocol, no.6), ""udp"" (UDP/IP protocol, no.17), ""icmpv4"" (ICMPv4 protocol, no.1), ""icmpv6"" (ICMPv6 protocol, no.58) or ""ip"" (all protocols, no.0). Specify 0 to make the rule apply to all IP protocols. -CMD_AccessAdd_SRCPORT If the specified protocol is TCP/IP or UDP/IP, specify the source port number as the rule condition. Protocols other than this will be ignored. When this parameter is not specified, the rules will apply to all port numbers. When specifying, do so using the following method ""1-1024"" (1 to 1024), ""23"" (only 23). +CMD_AccessAdd_SRCIP Specify a source IPv4 address as a rule condition. Specify the IPv4 address in the format of "IP Address/Mask" by separating the decimal values using dots such as "192.168.0.1". For the mask, either specify decimal values separated by dots such as "255.255.255.0", or you can specify the bit length from the header using a decimal value such as "24". If you specify "0.0.0.0/0.0.0.0", this means all hosts. +CMD_AccessAdd_DESTIP Specify a destination IPv4 address as a rule condition in the format of "IP Address/Mask". Use the same method of specification as for the /SRCIP parameter. +CMD_AccessAdd_PROTOCOL Specify a protocol type as a rule condition. Input the IP protocol number using decimal values or specify one of the keywords "tcp" (TCP/IP protocol, no.6), "udp" (UDP/IP protocol, no.17), "icmpv4" (ICMPv4 protocol, no.1), "icmpv6" (ICMPv6 protocol, no.58) or "ip" (all protocols, no.0). Specify 0 to make the rule apply to all IP protocols. +CMD_AccessAdd_SRCPORT If the specified protocol is TCP/IP or UDP/IP, specify the source port number as the rule condition. Protocols other than this will be ignored. When this parameter is not specified, the rules will apply to all port numbers. When specifying, do so using the following method "1-1024" (1 to 1024), "23" (only 23). CMD_AccessAdd_DESTPORT If the specified protocol is TCP/IP or UDP/IP, specify the destination port number as the rule condition. Protocols other than this will be ignored. Use the same method of specification as for the /SRCPORT parameter. CMD_AccessAdd_SRCUSERNAME You can apply this rule to only the packets sent by a user session of a user name that has been specified as a rule condition. In this case, specify the user name. CMD_AccessAdd_DESTUSERNAME You can apply this rule to only the packets received by a user session of a user name that has been specified as a rule condition. In this case, specify the user name. -CMD_AccessAdd_SRCMAC Specify destination MAC address as a rule. Specify MAC address with ""-"" or "":"" separators and hexadecimal number like ""00-AC-84-EA-33-BC/FF-FF-FF-FF-FF-00"". The separators are skippable. +CMD_AccessAdd_SRCMAC Specify destination MAC address as a rule. Specify MAC address with "-" or ":" separators and hexadecimal number like "00-AC-84-EA-33-BC/FF-FF-FF-FF-FF-00". The separators are skippable. CMD_AccessAdd_DESTMAC Specify destination MAC address as a rule. Use the same method of specification as for the /SRCMAC parameter. CMD_AccessAdd_TCPSTATE Specify TCP connection state as a rule. Use Established or Unestablished. CMD_AccessAdd_Prompt_TYPE Aprovar ou descartar: CMD_AccessAdd_Prompt_MEMO Descrição da regra (lembrete): CMD_AccessAdd_Prompt_PRIORITY Prioridade da regra: CMD_AccessAdd_Eval_PRIORITY Specify an integer of 1 or higher for the priority. -CMD_AccessAdd_Prompt_SRCIP Source IP Address (""0.0.0.0/0"" specifies all): -CMD_AccessAdd_Prompt_DESTIP Destination IP Address (""0.0.0.0/0"" specifies all): +CMD_AccessAdd_Prompt_SRCIP Source IP Address ("0.0.0.0/0" specifies all): +CMD_AccessAdd_Prompt_DESTIP Destination IP Address ("0.0.0.0/0" specifies all): CMD_AccessAdd_Prompt_PROTOCOL Protocol No. or Protocol Name (tcp/udp/icmpv4/icmpv6/ip): CMD_AccessAdd_Prompt_SRCPORT Source Port Number Range (tcp/udp only): CMD_AccessAdd_Prompt_DESTPORT Destination Port Number Range (tcp/udp only): @@ -5283,14 +5282,14 @@ CMD_AccessAddEx_Args AccessAddEx [pass|discard] [/MEMO:memo] [/PRIORITY:priority CMD_AccessAddEx_[pass|discard] When a packet matches this rule condition, this operation is decided. When pass is specified, the packet is allowed to pass, and when discard is specified, the packet is discarded. The setting of delays, jitters and packet losses is applied if the action is pass. CMD_AccessAddEx_MEMO Specify a description (memo) for this rule. CMD_AccessAddEx_PRIORITY Specify an integer of 1 or higher to indicate the priority of the rule. Higher priority is given to rules with the lower priority values. -CMD_AccessAddEx_SRCIP Specify a source IPv4 address as a rule condition. Specify the IPv4 address in the format of ""IP Address/Mask"" by separating the decimal values using dots such as ""192.168.0.1"". For the mask, either specify decimal values separated by dots such as ""255.255.255.0"", or you can specify the bit length from the header using a decimal value such as ""24"". If you specify ""0.0.0.0/0.0.0.0"", this means all hosts. -CMD_AccessAddEx_DESTIP Specify a destination IPv4 address as a rule condition in the format of ""IP Address/Mask"". Use the same method of specification as for the /SRCIP parameter. -CMD_AccessAddEx_PROTOCOL Specify a protocol type as a rule condition. Input the IP protocol number using decimal values or specify one of the keywords ""tcp"" (TCP/IP protocol, no.6), ""udp"" (UDP/IP protocol, no.17), ""icmpv4"" (ICMPv4 protocol, no.1), ""icmpv6"" (ICMPv6 protocol, no.58) or ""ip"" (all protocols, no.0). Specify 0 to make the rule apply to all IP protocols. -CMD_AccessAddEx_SRCPORT If the specified protocol is TCP/IP or UDP/IP, specify the source port number as the rule condition. Protocols other than this will be ignored. When this parameter is not specified, the rules will apply to all port numbers. When specifying, do so using the following method ""1-1024"" (1 to 1024), ""23"" (only 23). +CMD_AccessAddEx_SRCIP Specify a source IPv4 address as a rule condition. Specify the IPv4 address in the format of "IP Address/Mask" by separating the decimal values using dots such as "192.168.0.1". For the mask, either specify decimal values separated by dots such as "255.255.255.0", or you can specify the bit length from the header using a decimal value such as "24". If you specify "0.0.0.0/0.0.0.0", this means all hosts. +CMD_AccessAddEx_DESTIP Specify a destination IPv4 address as a rule condition in the format of "IP Address/Mask". Use the same method of specification as for the /SRCIP parameter. +CMD_AccessAddEx_PROTOCOL Specify a protocol type as a rule condition. Input the IP protocol number using decimal values or specify one of the keywords "tcp" (TCP/IP protocol, no.6), "udp" (UDP/IP protocol, no.17), "icmpv4" (ICMPv4 protocol, no.1), "icmpv6" (ICMPv6 protocol, no.58) or "ip" (all protocols, no.0). Specify 0 to make the rule apply to all IP protocols. +CMD_AccessAddEx_SRCPORT If the specified protocol is TCP/IP or UDP/IP, specify the source port number as the rule condition. Protocols other than this will be ignored. When this parameter is not specified, the rules will apply to all port numbers. When specifying, do so using the following method "1-1024" (1 to 1024), "23" (only 23). CMD_AccessAddEx_DESTPORT If the specified protocol is TCP/IP or UDP/IP, specify the destination port number as the rule condition. Protocols other than this will be ignored. Use the same method of specification as for the /SRCPORT parameter. CMD_AccessAddEx_SRCUSERNAME You can apply this rule to only the packets sent by a user session of a user name that has been specified as a rule condition. In this case, specify the user name. CMD_AccessAddEx_DESTUSERNAME You can apply this rule to only the packets received by a user session of a user name that has been specified as a rule condition. In this case, specify the user name. -CMD_AccessAddEx_SRCMAC Specify destination MAC address as a rule. Specify MAC address with ""-"" or "":"" separators and hexadecimal number like ""00-AC-84-EA-33-BC/FF-FF-FF-FF-FF-00"". The separators are skippable. +CMD_AccessAddEx_SRCMAC Specify destination MAC address as a rule. Specify MAC address with "-" or ":" separators and hexadecimal number like "00-AC-84-EA-33-BC/FF-FF-FF-FF-FF-00". The separators are skippable. CMD_AccessAddEx_DESTMAC Specify destination MAC address as a rule. Use the same method of specification as for the /SRCMAC parameter. CMD_AccessAddEx_TCPSTATE Specify TCP connection state as a rule. Use Established or Unestablished. CMD_AccessAddEx_DELAY Set this value to generate delays when packets is passing. Specify the delay period in milliseconds. Specify 0 means no delays to generate. The delays must be 10000 milliseconds at most. @@ -5312,22 +5311,22 @@ CMD_AccessAdd6_Args AccessAdd6 [pass|discard] [/MEMO:memo] [/PRIORITY:priority] CMD_AccessAdd6_[pass|discard] When a packet matches this rule condition, this operation is decided. When pass is specified, the packet is allowed to pass, and when discard is specified, the packet is discarded. CMD_AccessAdd6_MEMO Specify a description (memo) for this rule. CMD_AccessAdd6_PRIORITY Specify an integer of 1 or higher to indicate the priority of the rule. Higher priority is given to rules with the lower priority values. -CMD_AccessAdd6_SRCIP Specify a source IPv6 address as a rule condition. Specify the IPv6 address in the format of ""IP Address/Mask"" by separating the hexadecimal values using colons such as ""2001:200:0:1::"". For the mask, either specify hexadecimal values separated by colons such as ffff:ffff:ffff:ffff::, or you can specify the bit length from the header using a decimal value such as ""64"". If you specify ""::/0"", this means all hosts. -CMD_AccessAdd6_DESTIP Specify a destination IPv6 address as a rule condition in the format of ""IP Address/Mask"". Use the same method of specification as for the /SRCIP parameter. -CMD_AccessAdd6_PROTOCOL Specify a protocol type as a rule condition. Input the IP protocol number using decimal values or specify one of the keywords ""tcp"" (TCP/IP protocol, no.6), ""udp"" (UDP/IP protocol, no.17), ""icmpv4"" (ICMPv4 protocol, no.1), ""icmpv6"" (ICMPv6 protocol, no.58) or ""ip"" (all protocols, no.0). Specify 0 to make the rule apply to all IP protocols. -CMD_AccessAdd6_SRCPORT If the specified protocol is TCP/IP or UDP/IP, specify the source port number as the rule condition. Protocols other than this will be ignored. When this parameter is not specified, the rules will apply to all port numbers. When specifying, do so using the following method ""1-1024"" (1 to 1024), ""23"" (only 23). +CMD_AccessAdd6_SRCIP Specify a source IPv6 address as a rule condition. Specify the IPv6 address in the format of "IP Address/Mask" by separating the hexadecimal values using colons such as "2001:200:0:1::". For the mask, either specify hexadecimal values separated by colons such as ffff:ffff:ffff:ffff::, or you can specify the bit length from the header using a decimal value such as "64". If you specify "::/0", this means all hosts. +CMD_AccessAdd6_DESTIP Specify a destination IPv6 address as a rule condition in the format of "IP Address/Mask". Use the same method of specification as for the /SRCIP parameter. +CMD_AccessAdd6_PROTOCOL Specify a protocol type as a rule condition. Input the IP protocol number using decimal values or specify one of the keywords "tcp" (TCP/IP protocol, no.6), "udp" (UDP/IP protocol, no.17), "icmpv4" (ICMPv4 protocol, no.1), "icmpv6" (ICMPv6 protocol, no.58) or "ip" (all protocols, no.0). Specify 0 to make the rule apply to all IP protocols. +CMD_AccessAdd6_SRCPORT If the specified protocol is TCP/IP or UDP/IP, specify the source port number as the rule condition. Protocols other than this will be ignored. When this parameter is not specified, the rules will apply to all port numbers. When specifying, do so using the following method "1-1024" (1 to 1024), "23" (only 23). CMD_AccessAdd6_DESTPORT If the specified protocol is TCP/IP or UDP/IP, specify the destination port number as the rule condition. Protocols other than this will be ignored. Use the same method of specification as for the /SRCPORT parameter. CMD_AccessAdd6_SRCUSERNAME You can apply this rule to only the packets sent by a user session of a user name that has been specified as a rule condition. In this case, specify the user name. CMD_AccessAdd6_DESTUSERNAME You can apply this rule to only the packets received by a user session of a user name that has been specified as a rule condition. In this case, specify the user name. -CMD_AccessAdd6_SRCMAC Specify destination MAC address as a rule. Specify MAC address with ""-"" or "":"" separators and hexadecimal number like ""00-AC-84-EA-33-BC/FF-FF-FF-FF-FF-00"". The separators can be skipped. +CMD_AccessAdd6_SRCMAC Specify destination MAC address as a rule. Specify MAC address with "-" or ":" separators and hexadecimal number like "00-AC-84-EA-33-BC/FF-FF-FF-FF-FF-00". The separators can be skipped. CMD_AccessAdd6_DESTMAC Specify destination MAC address as a rule. Use the same method of specification as for the /SRCMAC parameter. CMD_AccessAdd6_TCPSTATE Specify TCP connection state as a rule. Use Established or Unestablished. CMD_AccessAdd6_Prompt_TYPE Aprovar ou descartar: CMD_AccessAdd6_Prompt_MEMO Descrição da regra (lembrete): CMD_AccessAdd6_Prompt_PRIORITY Prioridade da regra: CMD_AccessAdd6_Eval_PRIORITY Specify an integer of 1 or higher for the priority. -CMD_AccessAdd6_Prompt_SRCIP Source IP Address (""::/0"" specifies all): -CMD_AccessAdd6_Prompt_DESTIP Destination IP Address (""::/0"" specifies all): +CMD_AccessAdd6_Prompt_SRCIP Source IP Address ("::/0" specifies all): +CMD_AccessAdd6_Prompt_DESTIP Destination IP Address ("::/0" specifies all): CMD_AccessAdd6_Prompt_PROTOCOL Protocol No. or Protocol Name (tcp/udp/icmpv4/icmpv6/ip): CMD_AccessAdd6_Prompt_SRCPORT Source Port Number Range (tcp/udp only): CMD_AccessAdd6_Prompt_DESTPORT Destination Port Number Range (tcp/udp only): @@ -5345,14 +5344,14 @@ CMD_AccessAddEx6_Args AccessAddEx6 [pass|discard] [/MEMO:memo] [/PRIORITY:priori CMD_AccessAddEx6_[pass|discard] When a packet matches this rule condition, this operation is decided. When pass is specified, the packet is allowed to pass, and when discard is specified, the packet is discarded. The setting of delays, jitters and packet losses is applied if the action is pass. CMD_AccessAddEx6_MEMO Specify a description (memo) for this rule. CMD_AccessAddEx6_PRIORITY Specify an integer of 1 or higher to indicate the priority of the rule. Higher priority is given to rules with the lower priority values. -CMD_AccessAddEx6_SRCIP Specify a source IPv6 address as a rule condition. Specify the IPv6 address in the format of ""IP Address/Mask"" by separating the hexadecimal values using colons such as ""2001:200:0:1::"". For the mask, either specify hexadecimal values separated by colons such as ""ffff:ffff:ffff:ffff::"", or you can specify the bit length from the header using a decimal value such as 64. If you specify ""::/0"", this means all hosts. -CMD_AccessAddEx6_DESTIP Specify a destination IPv6 address as a rule condition in the format of ""IP Address/Mask"". Use the same method of specification as for the /SRCIP parameter. -CMD_AccessAddEx6_PROTOCOL Specify a protocol type as a rule condition. Input the IP protocol number using decimal values or specify one of the keywords ""tcp"" (TCP/IP protocol, no.6), ""udp"" (UDP/IP protocol, no.17), ""icmpv4"" (ICMPv4 protocol, no.1), ""icmpv6"" (ICMPv6 protocol, no.58) or ""ip"" (all protocols, no.0). Specify 0 to make the rule apply to all IP protocols. -CMD_AccessAddEx6_SRCPORT If the specified protocol is TCP/IP or UDP/IP, specify the source port number as the rule condition. Protocols other than this will be ignored. When this parameter is not specified, the rules will apply to all port numbers. When specifying, do so using the following method ""1-1024"" (1 to 1024), ""23"" (only 23). +CMD_AccessAddEx6_SRCIP Specify a source IPv6 address as a rule condition. Specify the IPv6 address in the format of "IP Address/Mask" by separating the hexadecimal values using colons such as "2001:200:0:1::". For the mask, either specify hexadecimal values separated by colons such as "ffff:ffff:ffff:ffff::", or you can specify the bit length from the header using a decimal value such as 64. If you specify "::/0", this means all hosts. +CMD_AccessAddEx6_DESTIP Specify a destination IPv6 address as a rule condition in the format of "IP Address/Mask". Use the same method of specification as for the /SRCIP parameter. +CMD_AccessAddEx6_PROTOCOL Specify a protocol type as a rule condition. Input the IP protocol number using decimal values or specify one of the keywords "tcp" (TCP/IP protocol, no.6), "udp" (UDP/IP protocol, no.17), "icmpv4" (ICMPv4 protocol, no.1), "icmpv6" (ICMPv6 protocol, no.58) or "ip" (all protocols, no.0). Specify 0 to make the rule apply to all IP protocols. +CMD_AccessAddEx6_SRCPORT If the specified protocol is TCP/IP or UDP/IP, specify the source port number as the rule condition. Protocols other than this will be ignored. When this parameter is not specified, the rules will apply to all port numbers. When specifying, do so using the following method "1-1024" (1 to 1024), "23" (only 23). CMD_AccessAddEx6_DESTPORT If the specified protocol is TCP/IP or UDP/IP, specify the destination port number as the rule condition. Protocols other than this will be ignored. Use the same method of specification as for the /SRCPORT parameter. CMD_AccessAddEx6_SRCUSERNAME You can apply this rule to only the packets sent by a user session of a user name that has been specified as a rule condition. In this case, specify the user name. CMD_AccessAddEx6_DESTUSERNAME You can apply this rule to only the packets received by a user session of a user name that has been specified as a rule condition. In this case, specify the user name. -CMD_AccessAddEx6_SRCMAC Specify destination MAC address as a rule. Specify MAC address with ""-"" or "":"" separators and hexadecimal number like ""00-AC-84-EA-33-BC/FF-FF-FF-FF-FF-00"". The separators can be skipped. +CMD_AccessAddEx6_SRCMAC Specify destination MAC address as a rule. Specify MAC address with "-" or ":" separators and hexadecimal number like "00-AC-84-EA-33-BC/FF-FF-FF-FF-FF-00". The separators can be skipped. CMD_AccessAddEx6_DESTMAC Specify destination MAC address as a rule. Use the same method of specification as for the /SRCMAC parameter. CMD_AccessAddEx6_TCPSTATE Specify TCP connection state as a rule. Use Established or Unestablished. CMD_AccessAddEx6_DELAY Set this value to generate delays when packets is passing. Specify the delay period in milliseconds. Specify 0 means no delays to generate. The delays must be 10000 milliseconds at most. @@ -5403,7 +5402,7 @@ CMD_UserList_Args ListaUser # UserCreate command CMD_UserCreate Criar usuário -CMD_UserCreate_Help Use this to create a new user in the security account database of the currently managed Virtual Hub. \nBy creating a user, the VPN Client can connect to the Virtual Hub by using the authentication information of that user. \nWhen a user is created using the UserCreate command and the auth type of that user is registered as Password Authentication, a random string will be assigned as the password. Therefore, that user will not be able to connect to the Virtual Hub in that state. After creating the user, you must always use the UserPasswordSet command to specify the user password, or alternatively use the UserAnonymousSet command, UserCertSet command, UserSignedSet command, UserRadiusSet command or UserNTLMSet command to change the user's auth type. \nNote that a user whose user name has been created as ""*"" (a single asterisk character) will automatically be registered as a RADIUS authentication user. For cases where there are users with ""*"" as the name, when a user, whose user name that has been provided when a client connected to a VPN Server does not match existing user names, is able to be authenticated by a RADIUS server or NT domain controller by inputting a user name and password, the authentication settings and security policy settings will follow the setting for the user ""*"". \nTo change the user information of a user that has been created, use the UserSet command. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a member server on a cluster. +CMD_UserCreate_Help Use this to create a new user in the security account database of the currently managed Virtual Hub. \nBy creating a user, the VPN Client can connect to the Virtual Hub by using the authentication information of that user. \nWhen a user is created using the UserCreate command and the auth type of that user is registered as Password Authentication, a random string will be assigned as the password. Therefore, that user will not be able to connect to the Virtual Hub in that state. After creating the user, you must always use the UserPasswordSet command to specify the user password, or alternatively use the UserAnonymousSet command, UserCertSet command, UserSignedSet command, UserRadiusSet command or UserNTLMSet command to change the user's auth type. \nNote that a user whose user name has been created as "*" (a single asterisk character) will automatically be registered as a RADIUS authentication user. For cases where there are users with "*" as the name, when a user, whose user name that has been provided when a client connected to a VPN Server does not match existing user names, is able to be authenticated by a RADIUS server or NT domain controller by inputting a user name and password, the authentication settings and security policy settings will follow the setting for the user "*". \nTo change the user information of a user that has been created, use the UserSet command. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a member server on a cluster. CMD_UserCreate_Args UserCreate [name] [/GROUP:group] [/REALNAME:realname] [/NOTE:note] CMD_UserCreate_[name] Specify the user name of the user to be newly created. CMD_UserCreate_GROUP When assigning a user in a group, specify the group name. When not assigning a user to any group, specify /GROUP:none. @@ -5487,8 +5486,8 @@ CMD_UserSignedSet Set Signed Certificate Authentication for User Auth Type CMD_UserSignedSet_Help Use this to set Signed Certificate Authentication as the auth type for a user that is registered on the security account database of the currently managed Virtual Hub. When a user connects to a Virtual Hub using a user name that is set for signed certificate authentication, an RSA algorithm is used to verify whether the certificate provided by the user is signed by any of the certificates in the list of trusted CA certificates of that Virtual Hub and whether the client holds a private key that corresponds with that certificate, and if so, connection is allowed. \nIt is also possible to set the connection to be allowed only when a certificate common name (CN) and serial number that is expected for each user is registered and the contents of the certificate after the abovementioned verification is passed matches the set value. \nTo get the list of currently registered users, use the UserList command. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a member server on a cluster. CMD_UserSignedSet_Args UserSignedSet [name] [/CN:cn] [/SERIAL:serial] CMD_UserSignedSet_[name] Specify the user name of the user whose setting you want to change. -CMD_UserSignedSet_CN When this parameter is set, after it has been verified that the certificate that the user provided has been signed by the trusted certificate authority, connection will only be allowed when the value of the common name (CN) of this certificate is compared with the value set by this parameter and the values match. When ""none"" is specified, this check is not made. -CMD_UserSignedSet_SERIAL When this parameter is set, after it has been verified that the certificate that the user provided has been signed by the trusted certificate authority, connection will only be allowed when the value of the serial number of this certificate is compared with the value set by this parameter and the values match. When ""none"" is specified, this check is not made. +CMD_UserSignedSet_CN When this parameter is set, after it has been verified that the certificate that the user provided has been signed by the trusted certificate authority, connection will only be allowed when the value of the common name (CN) of this certificate is compared with the value set by this parameter and the values match. When "none" is specified, this check is not made. +CMD_UserSignedSet_SERIAL When this parameter is set, after it has been verified that the certificate that the user provided has been signed by the trusted certificate authority, connection will only be allowed when the value of the serial number of this certificate is compared with the value set by this parameter and the values match. When "none" is specified, this check is not made. CMD_UserSignedSet_Prompt_CN Limit of Common Name (CN) Value: CMD_UserSignedSet_Prompt_SERIAL Limit of Serial Number Value: @@ -5498,7 +5497,7 @@ CMD_UserRadiusSet Set RADIUS Authentication for User Auth Type CMD_UserRadiusSet_Help Use this to set RADIUS Authentication as the auth type for a user that is registered on the security account database of the currently managed Virtual Hub. When a user connects to a Virtual Hub using a user name that is set for RADIUS authentication, the user name and the user input password is sent to the RADIUS server where the RADIUS SERVER checks the user name and password, then if the verification is successful, that user is allowed VPN connection. \nIn order to user RADIUS authentication, the RADIUS server used for this verification must be set in the Virtual Hub beforehand by using the RadiusServerSet command. \nTo get the list of currently registered users, use the UserList command. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a member server on a cluster. CMD_UserRadiusSet_Args UserRadiusSet [name] [/ALIAS:alias_name] CMD_UserRadiusSet_[name] Specify the user name of the user whose setting you want to change. -CMD_UserRadiusSet_ALIAS When this parameter is set, it is possible to make the user name sent to the RADIUS server different to the user name on the Virtual Hub. When this is not set, please specify /ALIAS:none (the user name on the Virtual Hub will be used). If the user name is ""*"", the /ALIAS parameter will be ignored. To read an explanation of the ""*"" user, please input UserCreate/HELP to display this information. +CMD_UserRadiusSet_ALIAS When this parameter is set, it is possible to make the user name sent to the RADIUS server different to the user name on the Virtual Hub. When this is not set, please specify /ALIAS:none (the user name on the Virtual Hub will be used). If the user name is "*", the /ALIAS parameter will be ignored. To read an explanation of the "*" user, please input UserCreate/HELP to display this information. CMD_UserRadiusSet_Prompt_ALIAS Alias Name for Authentication (Optional): @@ -5507,7 +5506,7 @@ CMD_UserNTLMSet Set NT Domain Authentication for User Auth Type CMD_UserNTLMSet_Help Use this to set NT Domain Authentication as the auth type for a user that is registered on the security account database of the currently managed Virtual Hub. When a user connects to a Virtual Hub using a user name that is set for NT Domain authentication, the user name and the user input password is sent to the Windows NT / 2000 / Server 2003 / Server 2008 / Server 2008 R2 / Server 2012 Domain Controller or Active Directory Server where the server checks the user name and password, then if the verification is successful, that user is allowed VPN connection. \nTo use NT Domain authentication, the VPN Server must be operating on a Windows NT 4.0, Windows 2000, Windows XP, Windows Vista, Windows Server 2008, Windows Server 2008 R2 or Windows Server 2012 operating system that is connected to that domain. For details please contact the VPN Server's administrator. \nTo get the list of currently registered users, use the UserList command. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a member server on a cluster. CMD_UserNTLMSet_Args UserNTLMSet [name] [/ALIAS:alias_name] CMD_UserNTLMSet_[name] Specify the user name of the user whose setting you want to change. -CMD_UserNTLMSet_ALIAS When this parameter is set, it is possible to make the user name sent to the NT Domain or Active Directory server different to the user name on the Virtual Hub. When this is not set, please specify /ALIAS:none (the user name on the Virtual Hub will be used). If the user name is ""*"", the /ALIAS parameter will be ignored. To read an explanation of the ""*"" user, please input UserCreate/HELP to display this information. +CMD_UserNTLMSet_ALIAS When this parameter is set, it is possible to make the user name sent to the NT Domain or Active Directory server different to the user name on the Virtual Hub. When this is not set, please specify /ALIAS:none (the user name on the Virtual Hub will be used). If the user name is "*", the /ALIAS parameter will be ignored. To read an explanation of the "*" user, please input UserCreate/HELP to display this information. # UserPolicyRemove command @@ -5531,7 +5530,7 @@ CMD_UserExpiresSet Set User's Expiration Date CMD_UserExpiresSet_Help Use this to set the user's expiration date that is registered on the security account database of the currently managed Virtual Hub. A user whose expiration date has expired cannot connect to the Virtual Hub. \nTo get the list of currently registered users, use the UserList command. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a member server on a cluster. CMD_UserExpiresSet_Args UserExpiresSet [name] [/EXPIRES:expires] CMD_UserExpiresSet_[name] Specify the user name of the user whose setting you want to change. -CMD_UserExpiresSet_EXPIRES Specify the user expiration date and time. The date and time must be in the same format as ""2005/10/08 19:30:00"" where 6 integers are specified, representing year/month/day hour:minute:second separated by forward slashes, a space and then colons. Specify 4 digits for the year. If you put a space in a value, the entire value must be enclosed by """". For this specification, local time (standard time for the computer on which the command line management utility is running) can be specified. By specifying /EXPIRES:none, you can remove the expiration date restriction. +CMD_UserExpiresSet_EXPIRES Specify the user expiration date and time. The date and time must be in the same format as "2005/10/08 19:30:00" where 6 integers are specified, representing year/month/day hour:minute:second separated by forward slashes, a space and then colons. Specify 4 digits for the year. If you put a space in a value, the entire value must be enclosed by "". For this specification, local time (standard time for the computer on which the command line management utility is running) can be specified. By specifying /EXPIRES:none, you can remove the expiration date restriction. CMD_UserExpiresSet_Prompt_EXPIRES User Expiration Date (no expiration if nothing specified): @@ -5586,7 +5585,7 @@ CMD_GroupJoin Add User to Group CMD_GroupJoin_Help Use this to add a user in the security account database of the currently managed Virtual Hub to a group that is registered on that security account database. \nTo get a list of users and groups that are currently registered, use the UserList command and the GroupList command. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a member server on a cluster. CMD_GroupJoin_Args GroupJoin [name] [/USERNAME:username] CMD_GroupJoin_[name] Specify the group name of the group to which you want to add a user. -CMD_GroupJoin_USERNAME Specify the user name of the user you want to add to the group specified by ""name"". +CMD_GroupJoin_USERNAME Specify the user name of the user you want to add to the group specified by "name". CMD_GroupJoin_Prompt_USERNAME Name of User to Join Group: @@ -5696,7 +5695,7 @@ CMD_SecureNatHostGet_Column_LOG Save NAT and DHCP Operation Log CMD_SecureNatHostSet Change Network Interface Setting of Virtual Host of SecureNAT Function CMD_SecureNatHostSet_Help Use this to change and save the virtual host network interface setting in the setting items of the Virtual NAT and DHCP Server function (SecureNAT function) on the currently managed Virtual Hub. \nThe SecureNAT function holds one virtual network adapter on the L2 segment inside the Virtual Hub and it has been assigned a MAC address and an IP address. By doing this, another host connected to the same L2 segment is able to communicate with the SecureNAT virtual host as if it is an actual IP host existing on the network. \n\n[Warning about SecureNAT Function]\nThe SecureNAT function is recommended only for system administrators and people with a detailed knowledge of networks. \nIf you use the SecureNAT function correctly, it is possible to achieve a safe form of remote access via a VPN. However when used in the wrong way, it can put the entire network in danger. Anyone who does not have a thorough knowledge of networks and anyone who does not have the network administrators permission must not enable the SecureNAT function. For a detailed explanation of the SecureNAT function, please refer to the VPN Server's manual and online documentation. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_SecureNatHostSet_Args SecureNatHostSet [/MAC:mac] [/IP:ip] [/MASK:mask] -CMD_SecureNatHostSet_MAC Specify the MAC address to assign for the virtual interface. Specify a MAC address using a string like ""00-AC-01-23-45-67"". When /MAC:none is specified, no changes will be made to the current setting. +CMD_SecureNatHostSet_MAC Specify the MAC address to assign for the virtual interface. Specify a MAC address using a string like "00-AC-01-23-45-67". When /MAC:none is specified, no changes will be made to the current setting. CMD_SecureNatHostSet_IP Specify the IP address to assign for the virtual interface. When /IP:none is specified, no changes will be made to the current setting. CMD_SecureNatHostSet_MASK Specify the subnet mask to assign for the virtual interface. When /MASK:none is specified, no changes will be made to the current setting. CMD_SecureNatHostSet_Prompt_MAC Endereço MAC: @@ -5733,7 +5732,7 @@ CMD_NatSet_Args NatSet [/MTU:mtu] [/TCPTIMEOUT:tcp_timeout] [/UDPTIMEOUT:udp_tim CMD_NatSet_MTU Set the MTU (Maximum transferable unit size) using an integer to specify the byte length unit. This value is the maximum payload length excluding the MAC header of the Ethernet frame that the Virtual NAT sends and the default is 1500 bytes. CMD_NatSet_TCPTIMEOUT This sets how many seconds a condition of non-communication continues in a TCP session that the Virtual NAT is relaying before a timeout occurs and the session is discarded. CMD_NatSet_UDPTIMEOUT This sets how many seconds a condition of non-communication continues in a UDP session that the Virtual NAT is relaying before a timeout occurs and the session is discarded. -CMD_NatSet_LOG Specify whether or not to save the Virtual NAT operation in the Virtual Hub security log. Specify ""yes"" to save it, and ""no"" to not save it. +CMD_NatSet_LOG Specify whether or not to save the Virtual NAT operation in the Virtual Hub security log. Specify "yes" to save it, and "no" to not save it. CMD_NatSet_Prompt_MTU Valor MTU: CMD_NatSet_Prompt_TCPTIMEOUT TCP Session Timeout (Seconds): CMD_NatSet_Prompt_UDPTIMEOUT UDP Session Timeout (Seconds): @@ -5781,7 +5780,7 @@ CMD_DhcpDisable_Args DhcpDisable # DhcpSet command CMD_DhcpSet Change Virtual DHCP Server Function Setting of SecureNAT Function CMD_DhcpSet_Help Use this to change the Virtual DHCP Server setting of the currently managed Virtual Hub. The Virtual DHCP Server settings include the following items: distribution address band, subnet mask, lease limit, and option values assigned to clients. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. -CMD_DhcpSet_Args DhcpSet [/START:start_ip] [/END:end_ip] [/MASK:subnetmask] [/EXPIRE:sec] [/GW:gwip] [/DNS:dns] [/DNS2:dns2][/DOMAIN:domain] [/LOG:yes|no] [/PUSHROUTE:""routing_table""] +CMD_DhcpSet_Args DhcpSet [/START:start_ip] [/END:end_ip] [/MASK:subnetmask] [/EXPIRE:sec] [/GW:gwip] [/DNS:dns] [/DNS2:dns2][/DOMAIN:domain] [/LOG:yes|no] [/PUSHROUTE:"routing_table"] CMD_DhcpSet_START Specify the start point of the address band to be distributed to the client. (Example: 192.168.30.10) CMD_DhcpSet_END Specify the end point of the address band to be distributed to the client. (Example: 192.168.30.200) CMD_DhcpSet_MASK Specify the subnet mask to be specified for the client. (Example: 255.255.255.0) @@ -5790,8 +5789,8 @@ CMD_DhcpSet_GW Specify the IP address of the default gateway to be notified to t CMD_DhcpSet_DNS Specify the IP address of the primary DNS Server to be notified to the client. You can specify a SecureNAT Virtual Host IP address for this when the SecureNAT Function's Virtual NAT Function has been enabled and is being used also. If you specify 0 or none, then the client will not be notified of the DNS Server address. CMD_DhcpSet_DNS2 Specify the IP address of the secondary DNS Server to be notified to the client. You can specify a SecureNAT Virtual Host IP address for this when the SecureNAT Function's Virtual NAT Function has been enabled and is being used also. If you specify 0 or none, then the client will not be notified of the DNS Server address. CMD_DhcpSet_DOMAIN Specify the domain name to be notified to the client. If you specify none, then the client will not be notified of the domain name. -CMD_DhcpSet_LOG Specify whether or not to save the Virtual DHCP Server operation in the Virtual Hub security log. Specify ""yes"" to save it. This value is interlinked with the Virtual NAT Function log save setting. -CMD_DhcpSet_PUSHROUTE Specify the static routing table to push.\nExample: ""192.168.5.0/255.255.255.0/192.168.4.254, 10.0.0.0/255.0.0.0/192.168.4.253""\nSplit multiple entries (maximum: 64 entries) by comma or space characters. Each entry must be specified in the ""IP network address/subnet mask/gateway IP address"" format.\nThis Virtual DHCP Server can push the classless static routes (RFC 3442) with DHCP reply messages to VPN clients.\nWhether or not a VPN client can recognize the classless static routes (RFC 3442) depends on the target VPN client software. SoftEther VPN Client and OpenVPN Client are supporting the classless static routes. On L2TP/IPsec and MS-SSTP protocols, the compatibility depends on the implementation of the client software. You can realize the split tunneling if you clear the default gateway field on the Virtual DHCP Server options. On the client side, L2TP/IPsec and MS-SSTP clients need to be configured not to set up the default gateway for the split tunneling usage.\nYou can also push the classless static routes (RFC 3442) by your existing external DHCP server. In that case, disable the Virtual DHCP Server function on SecureNAT, and you need not to set up the classless routes on this command.\nSee the RFC 3442 to understand the classless routes. +CMD_DhcpSet_LOG Specify whether or not to save the Virtual DHCP Server operation in the Virtual Hub security log. Specify "yes" to save it. This value is interlinked with the Virtual NAT Function log save setting. +CMD_DhcpSet_PUSHROUTE Specify the static routing table to push.\nExample: "192.168.5.0/255.255.255.0/192.168.4.254, 10.0.0.0/255.0.0.0/192.168.4.253"\nSplit multiple entries (maximum: 64 entries) by comma or space characters. Each entry must be specified in the "IP network address/subnet mask/gateway IP address" format.\nThis Virtual DHCP Server can push the classless static routes (RFC 3442) with DHCP reply messages to VPN clients.\nWhether or not a VPN client can recognize the classless static routes (RFC 3442) depends on the target VPN client software. SoftEther VPN Client and OpenVPN Client are supporting the classless static routes. On L2TP/IPsec and MS-SSTP protocols, the compatibility depends on the implementation of the client software. You can realize the split tunneling if you clear the default gateway field on the Virtual DHCP Server options. On the client side, L2TP/IPsec and MS-SSTP clients need to be configured not to set up the default gateway for the split tunneling usage.\nYou can also push the classless static routes (RFC 3442) by your existing external DHCP server. In that case, disable the Virtual DHCP Server function on SecureNAT, and you need not to set up the classless routes on this command.\nSee the RFC 3442 to understand the classless routes. CMD_DhcpSet_Prompt_START Start Point for Distributed Address Band: CMD_DhcpSet_Prompt_END End Point for Distributed Address Band: CMD_DhcpSet_Prompt_MASK Máscara de sub-rede: @@ -5810,13 +5809,13 @@ CMD_DhcpTable_Args TabelaDhcp # AdminOptionList command CMD_AdminOptionList Get List of Virtual Hub Administration Options -CMD_AdminOptionList_Help Use this to get a list of Virtual Hub administration options that are set on the currently managed Virtual Hub. \nThe purpose of the Virtual Hub administration options is for the VPN Server Administrator to set limits for the setting ranges when the administration of the Virtual Hub is to be trusted to each Virtual Hub administrator. \nOnly an administrator with administration privileges for this entire VPN Server is able to add, edit and delete the Virtual Hub administration options. The Virtual Hub administrators are unable to make changes to the administration options, however they are able to view them. \nThere is an exception however. If allow_hub_admin_change_option is set to ""1"", even Virtual Hub administrators are able to edit the administration options. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster member. +CMD_AdminOptionList_Help Use this to get a list of Virtual Hub administration options that are set on the currently managed Virtual Hub. \nThe purpose of the Virtual Hub administration options is for the VPN Server Administrator to set limits for the setting ranges when the administration of the Virtual Hub is to be trusted to each Virtual Hub administrator. \nOnly an administrator with administration privileges for this entire VPN Server is able to add, edit and delete the Virtual Hub administration options. The Virtual Hub administrators are unable to make changes to the administration options, however they are able to view them. \nThere is an exception however. If allow_hub_admin_change_option is set to "1", even Virtual Hub administrators are able to edit the administration options. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster member. CMD_AdminOptionList_Args AdminOptionList # AdminOptionSet command CMD_AdminOptionSet Set Values of Virtual Hub Administration Options -CMD_AdminOptionSet_Help Use this to change the values of Virtual Hub administration options that are set on the currently managed Virtual Hub. \nThe purpose of the Virtual Hub administration options is for the VPN Server Administrator to set limits for the setting ranges when the administration of the Virtual Hub is to be trusted to each Virtual Hub administrator. \nOnly an administrator with administration privileges for this entire VPN Server is able to add, edit and delete the Virtual Hub administration options. The Virtual Hub administrators are unable to make changes to the administration options, however they are able to view them. \nThere is an exception however. If allow_hub_admin_change_option is set to ""1"", even Virtual Hub administrators are able to edit the administration options. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster member. +CMD_AdminOptionSet_Help Use this to change the values of Virtual Hub administration options that are set on the currently managed Virtual Hub. \nThe purpose of the Virtual Hub administration options is for the VPN Server Administrator to set limits for the setting ranges when the administration of the Virtual Hub is to be trusted to each Virtual Hub administrator. \nOnly an administrator with administration privileges for this entire VPN Server is able to add, edit and delete the Virtual Hub administration options. The Virtual Hub administrators are unable to make changes to the administration options, however they are able to view them. \nThere is an exception however. If allow_hub_admin_change_option is set to "1", even Virtual Hub administrators are able to edit the administration options. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster member. CMD_AdminOptionSet_Args AdminOptionSet [name] [/VALUE:value] CMD_AdminOptionSet_[name] Specify the name of the administration option whose value you want to change. You can get a list of names by using the AdminOptionList command. CMD_AdminOptionSet_VALUE Specify an integer for the setting value. @@ -5896,9 +5895,9 @@ CMD_AcList_Args ListaAc CMD_AcAdd Add Rule to Source IP Address Limit List (IPv4) CMD_AcAdd_Help Use this to add a new rule to the Source IP Address Limit List that is set on the currently managed Virtual Hub. \nThe items set here will be used to decide whether to allow or deny connection from a VPN Client when this client attempts connection to the Virtual Hub. \nYou can specify a client IP address, or IP address or mask to match the rule as the contents of the rule item. By specifying an IP address only, there will only be one specified computer that will match the rule, but by specifying an IP net mask address or subnet mask address, all the computers in the range of that subnet will match the rule. \nYou can specify the priority for the rule. You can specify an integer of 1 or greater for the priority and the smaller the number, the higher the priority. \nTo get a list of the currently registered Source IP Address Limit List, use the AcList command. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_AcAdd_Args AcAdd [allow|deny] [/PRIORITY:priority] [/IP:ip/mask] -CMD_AcAdd_[allow|deny] Set whether to ""allow"" or ""deny"" the connection from a client that matches the rule. +CMD_AcAdd_[allow|deny] Set whether to "allow" or "deny" the connection from a client that matches the rule. CMD_AcAdd_PRIORITY Specify an integer of 1 or higher to indicate the priority of the rule. The smaller the value the higher the priority. -CMD_AcAdd_IP Using the format: ""IP Address/Mask"", specify the range of client IPv4 addresses. Specify the IPv4 address by separating the decimal values using dots such as ""192.168.0.1"". For the mask, either specify decimal values separated by dots such as ""255.255.255.0"", or you can specify the bit length from the header using a decimal value such as ""24"". To specify a single IPv4 host, specify the mask as ""32"" or ""255.255.255.255"". +CMD_AcAdd_IP Using the format: "IP Address/Mask", specify the range of client IPv4 addresses. Specify the IPv4 address by separating the decimal values using dots such as "192.168.0.1". For the mask, either specify decimal values separated by dots such as "255.255.255.0", or you can specify the bit length from the header using a decimal value such as "24". To specify a single IPv4 host, specify the mask as "32" or "255.255.255.255". CMD_AcAdd_Prompt_AD permitir ou negar: CMD_AcAdd_Prompt_PRIORITY Prioridade: CMD_AcAdd_Prompt_IP IPv4 Address/Mask: @@ -5909,9 +5908,9 @@ CMD_AcAdd_Eval_PRIORITY Specify 1 or higher for the priority. CMD_AcAdd6 Add Rule to Source IP Address Limit List (IPv6) CMD_AcAdd6_Help Use this to add a new rule to the Source IP Address Limit List that is set on the currently managed Virtual Hub. \nThe items set here will be used to decide whether to allow or deny connection from a VPN Client when this client attempts connection to the Virtual Hub. \nYou can specify a client IP address, or IP address or mask to match the rule as the contents of the rule item. By specifying an IP address only, there will only be one specified computer that will match the rule, but by specifying an IP net mask address or subnet mask address, all the computers in the range of that subnet will match the rule. \nYou can specify the priority for the rule. You can specify an integer of 1 or greater for the priority and the smaller the number, the higher the priority. \nTo get a list of the currently registered Source IP Address Limit List, use the AcList command. \nThis command cannot be run on VPN Bridge. \nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_AcAdd6_Args AcAdd6 [allow|deny] [/PRIORITY:priority] [/IP:ip/mask] -CMD_AcAdd6_[allow|deny] Set whether to ""allow"" or ""deny"" the connection from a client that matches the rule. +CMD_AcAdd6_[allow|deny] Set whether to "allow" or "deny" the connection from a client that matches the rule. CMD_AcAdd6_PRIORITY Specify an integer of 1 or higher to indicate the priority of the rule. The smaller the value the higher the priority. -CMD_AcAdd6_IP Using the format: ""IP Address/Mask"", specify the range of client IPv6 addresses. Specify the IPv6 address by separating the hexadecimal values using colons such as ""2001:200:0:1::"". For the mask, either specify hexadecimal values separated by colons such as ""ffff:ffff:ffff:ffff::"", or you can specify the bit length from the header using a decimal value such as ""64"". To specify a single IPv6 host, specify the mask as ""128"" or ""ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff"". +CMD_AcAdd6_IP Using the format: "IP Address/Mask", specify the range of client IPv6 addresses. Specify the IPv6 address by separating the hexadecimal values using colons such as "2001:200:0:1::". For the mask, either specify hexadecimal values separated by colons such as "ffff:ffff:ffff:ffff::", or you can specify the bit length from the header using a decimal value such as "64". To specify a single IPv6 host, specify the mask as "128" or "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff". CMD_AcAdd6_Prompt_AD permitir ou negar: CMD_AcAdd6_Prompt_PRIORITY Prioridade: CMD_AcAdd6_Prompt_IP IPv6 Address/Mask: @@ -5964,8 +5963,8 @@ CMD_IPsecEnable_Args IPsecEnable [/L2TP:yes|no] [/L2TPRAW:yes|no] [/ETHERIP:yes| CMD_IPsecEnable_L2TP Enable or Disable the L2TP over IPsec Server Function. To accept VPN connections from iPhone, iPad, Android, Windows or Mac OS X, enable this option. CMD_IPsecEnable_L2TPRAW Enable or Disable the L2TP Server Function (Raw L2TP with No Encryptions). To accept special VPN clients, enable this option. CMD_IPsecEnable_ETHERIP Enable or Disable the EtherIP / L2TPv3 over IPsec Server Function (for site-to-site VPN Server function). Router Products which are compatible with EtherIP over IPsec can connect to Virtual Hubs on the VPN Server and establish Layer-2 (Ethernet) Bridging. -CMD_IPsecEnable_PSK Specify the IPsec Pre-Shared Key. An IPsec Pre-Shared Key is also called as ""PSK"" or ""secret"". Specify it equal or less than 8 letters, and distribute it to every users who will connect to the VPN Server. Please note: Google Android 4.0 has a bug which a Pre-Shared Key with 10 or more letters causes a unexpected behavior. For that reason, the letters of a Pre-Shared Key should be 9 or less characters. -CMD_IPsecEnable_DEFAULTHUB Specify the default Virtual HUB in a case of omitting the name of HUB on the Username. Users should specify their username such as ""Username@Target Virtual HUB Name"" to connect this L2TP Server. If the designation of the Virtual Hub is omitted, the above HUB will be used as the target. +CMD_IPsecEnable_PSK Specify the IPsec Pre-Shared Key. An IPsec Pre-Shared Key is also called as "PSK" or "secret". Specify it equal or less than 8 letters, and distribute it to every users who will connect to the VPN Server. Please note: Google Android 4.0 has a bug which a Pre-Shared Key with 10 or more letters causes a unexpected behavior. For that reason, the letters of a Pre-Shared Key should be 9 or less characters. +CMD_IPsecEnable_DEFAULTHUB Specify the default Virtual HUB in a case of omitting the name of HUB on the Username. Users should specify their username such as "Username@Target Virtual HUB Name" to connect this L2TP Server. If the designation of the Virtual Hub is omitted, the above HUB will be used as the target. CMD_IPsecEnable_Prompt_L2TP Enable L2TP over IPsec Server Function (yes / no): CMD_IPsecEnable_Prompt_L2TPRAW Enable Raw L2TP Server Function (yes / no): CMD_IPsecEnable_Prompt_ETHERIP Enable EtherIP / L2TPv3 over IPsec Server Function (yes / no): @@ -6017,7 +6016,7 @@ CMD_OpenVpnEnable Enable / Disable OpenVPN Clone Server Function CMD_OpenVpnEnable_Help This VPN Server has the clone functions of OpenVPN software products by OpenVPN Technologies, Inc. Any OpenVPN Clients can connect to this VPN Server.\n\nThe manner to specify a username to connect to the Virtual Hub, and the selection rule of default Hub by using this clone server functions are same to the IPsec Server functions. For details, please see the help of the IPsecEnable command.\n\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge.\nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_OpenVpnEnable_Args OpenVpnEnable [yes|no] [/PORTS:udp_port_list] CMD_OpenVpnEnable_[yes|no] Specify yes to enable the OpenVPN Clone Server Function. Specify no to disable. -CMD_OpenVpnEnable_PORTS Specify UDP ports to listen for OpenVPN. Multiple UDP ports can be specified with splitting by space or comma letters, for example: ""1194, 2001, 2010, 2012"". The default port for OpenVPN is UDP 1194. You can specify any other UDP ports. +CMD_OpenVpnEnable_PORTS Specify UDP ports to listen for OpenVPN. Multiple UDP ports can be specified with splitting by space or comma letters, for example: "1194, 2001, 2010, 2012". The default port for OpenVPN is UDP 1194. You can specify any other UDP ports. CMD_OpenVpnEnable_Prompt_[yes|no] Enables OpenVPN Clone Server Function (yes / no): CMD_OpenVpnEnable_Prompt_PORTS UDP Ports to Listen for OpenVPN (Default: 1194 / Multiple Accepted): @@ -6034,17 +6033,17 @@ CMD_OpenVpnGet_PRINT_Ports UDP Port List CMD_OpenVpnMakeConfig Generate a Sample Setting File for OpenVPN Client CMD_OpenVpnMakeConfig_Help Originally, the OpenVPN Client requires a user to write a very difficult configuration file manually. This tool helps you to make a useful configuration sample. What you need to generate the configuration file for the OpenVPN Client is to run this command.\n\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge.\nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_OpenVpnMakeConfig_Args OpenVpnMakeConfig [ZIP_FileName] -CMD_OpenVpnMakeConfig_[ZIP_FileName] Specify the output setting files to be saved as ZIP compression format. If no file extension is specified, the "".zip"" extension will be appended to the filename. +CMD_OpenVpnMakeConfig_[ZIP_FileName] Specify the output setting files to be saved as ZIP compression format. If no file extension is specified, the ".zip" extension will be appended to the filename. CMD_OpenVpnMakeConfig_Prompt_ZIP Output Filename of Setting Files (ZIP compressed file): -CMD_OpenVpnMakeConfig_OK The sample setting file was saved as ""%s"". You can unzip this file to extract setting files.\n -CMD_OpenVpnMakeConfig_ERROR The sample setting files were unable to be saved as ""%s"". The filename might be invalid.\n +CMD_OpenVpnMakeConfig_OK The sample setting file was saved as "%s". You can unzip this file to extract setting files.\n +CMD_OpenVpnMakeConfig_ERROR The sample setting files were unable to be saved as "%s". The filename might be invalid.\n # OpenVpnObfuscationEnable CMD_OpenVpnObfuscationEnable Enable / Disable the OpenVPN clone server function's obfuscation mode -CMD_OpenVpnObfuscationEnable_Help This allows an OpenVPN client to bypass a firewall which is aware of the protocol and is able to block it.\nThe same XOR mask have to be applied to the client, otherwise it will not be able to connect with certain obfuscation methods!\nBeware that you need a special OpenVPN client with the ""XOR patch"" applied in order to use this function, because it has never been merged in the official OpenVPN repository.\n\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge.\nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. +CMD_OpenVpnObfuscationEnable_Help This allows an OpenVPN client to bypass a firewall which is aware of the protocol and is able to block it.\nThe same XOR mask have to be applied to the client, otherwise it will not be able to connect with certain obfuscation methods!\nBeware that you need a special OpenVPN client with the "XOR patch" applied in order to use this function, because it has never been merged in the official OpenVPN repository.\n\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge.\nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_OpenVpnObfuscationEnable_Args OpenVpnObfuscationEnable [yes|no] [/MASK:mask] -CMD_OpenVpnObfuscationEnable_[yes|no] Specify ""yes"" to enable the OpenVPN obfuscation function. Specify ""no"" to disable it. +CMD_OpenVpnObfuscationEnable_[yes|no] Specify "yes" to enable the OpenVPN obfuscation function. Specify "no" to disable it. CMD_OpenVpnObfuscationEnable_MASK Mask used to XOR the bytes in the packet (used for certain obfuscation modes). CMD_OpenVpnObfuscationEnable_Prompt_[yes|no] Enable OpenVPN packet obfuscation (yes / no): CMD_OpenVpnObfuscationEnable_Prompt_MASK Máscara XOR @@ -6101,7 +6100,7 @@ CMD_VpnOverIcmpDnsGet_PRINT_DNS VPN over DNS Server Enabled # DynamicDnsGetStatus command CMD_DynamicDnsGetStatus Show the Current Status of Dynamic DNS Function -CMD_DynamicDnsGetStatus_Help Get and show the current status of the Dynamic DNS function.\n\nThe Dynamic DNS assigns a unique and permanent DNS hostname for this VPN Server. You can use that hostname to specify this VPN Server on the settings for VPN Client and VPN Bridge. You need not to register and keep a domain name.\nAlso, if your ISP assigns you a dynamic (not-fixed) IP address, the corresponding IP address of your Dynamic DNS hostname will be automatically changed. It enables you to keep running the VPN Server by using only a dynamic IP address.\r\nTherefore, you need not any longer to keep static global IP addresses with expenses monthly costs.\n[Caution]\nTo disable the Dynamic DNS Function, modify the configuration file of VPN Server.\r\n\r\nThe ""declare root"" directive has the ""declare DDnsClient"" directive. In this directive, you can switch ""bool Disable"" from false to true, and reboot the VPN Server, then the Dynamic DNS Function will be disabled.\r\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge. +CMD_DynamicDnsGetStatus_Help Get and show the current status of the Dynamic DNS function.\n\nThe Dynamic DNS assigns a unique and permanent DNS hostname for this VPN Server. You can use that hostname to specify this VPN Server on the settings for VPN Client and VPN Bridge. You need not to register and keep a domain name.\nAlso, if your ISP assigns you a dynamic (not-fixed) IP address, the corresponding IP address of your Dynamic DNS hostname will be automatically changed. It enables you to keep running the VPN Server by using only a dynamic IP address.\r\nTherefore, you need not any longer to keep static global IP addresses with expenses monthly costs.\n[Caution]\nTo disable the Dynamic DNS Function, modify the configuration file of VPN Server.\r\n\r\nThe "declare root" directive has the "declare DDnsClient" directive. In this directive, you can switch "bool Disable" from false to true, and reboot the VPN Server, then the Dynamic DNS Function will be disabled.\r\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge. CMD_DynamicDnsGetStatus_Args DynamicDnsGetStatus CMD_DynamicDnsGetStatus_PRINT_FQDN Assigned Dynamic DNS Hostname (Full) CMD_DynamicDnsGetStatus_PRINT_HOSTNAME Assigned Dynamic DNS Hostname (Hostname) @@ -6112,7 +6111,7 @@ CMD_DynamicDnsGetStatus_PRINT_IPv6 Global IPv6 Address # DynamicDnsSetHostname command CMD_DynamicDnsSetHostname Set the Dynamic DNS Hostname -CMD_DynamicDnsSetHostname_Help You can use this command to change the hostname assigned by the Dynamic DNS function. The currently assigned hostname can be showen by the DynamicDnsGetStatus command.\n\nThe Dynamic DNS assigns a unique and permanent DNS hostname for this VPN Server. You can use that hostname to specify this VPN Server on the settings for VPN Client and VPN Bridge. You need not to register and keep a domain name.\nAlso, if your ISP assigns you a dynamic (not-fixed) IP address, the corresponding IP address of your Dynamic DNS hostname will be automatically changed. It enables you to keep running the VPN Server by using only a dynamic IP address.\r\nTherefore, you need not any longer to keep static global IP addresses with expenses monthly costs.\n[Caution]\nTo disable the Dynamic DNS Function, modify the configuration file of VPN Server.\r\n\r\nThe ""declare root"" directive has the ""declare DDnsClient"" directive. In this directive, you can switch ""bool Disable"" from false to true, and reboot the VPN Server, then the Dynamic DNS Function will be disabled.\r\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge. +CMD_DynamicDnsSetHostname_Help You can use this command to change the hostname assigned by the Dynamic DNS function. The currently assigned hostname can be showen by the DynamicDnsGetStatus command.\n\nThe Dynamic DNS assigns a unique and permanent DNS hostname for this VPN Server. You can use that hostname to specify this VPN Server on the settings for VPN Client and VPN Bridge. You need not to register and keep a domain name.\nAlso, if your ISP assigns you a dynamic (not-fixed) IP address, the corresponding IP address of your Dynamic DNS hostname will be automatically changed. It enables you to keep running the VPN Server by using only a dynamic IP address.\r\nTherefore, you need not any longer to keep static global IP addresses with expenses monthly costs.\n[Caution]\nTo disable the Dynamic DNS Function, modify the configuration file of VPN Server.\r\n\r\nThe "declare root" directive has the "declare DDnsClient" directive. In this directive, you can switch "bool Disable" from false to true, and reboot the VPN Server, then the Dynamic DNS Function will be disabled.\r\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge. CMD_DynamicDnsSetHostname_Args DynamicDnsSetHostname [hostname] CMD_DynamicDnsSetHostname_[hostname] Specify the new hostname with 3 letters at least and 31 letters at most. Only alphabets and numerics can be used. CMD_DynamicDnsSetHostname_Prompt_hostname Dynamic DNS Hostname (3 - 31 letters): @@ -6120,7 +6119,7 @@ CMD_DynamicDnsSetHostname_Prompt_hostname Dynamic DNS Hostname (3 - 31 letters): # VpnAzureGetStatus command CMD_VpnAzureGetStatus Show the current status of VPN Azure function -CMD_VpnAzureGetStatus_Help Get and show the current status of the VPN Azure function.\n\nVPN Azure makes it easier to establish a VPN Session from your home PC to your office PC. While a VPN connection is established, you can access to any other servers on the private network of your company.\nYou don't need a global IP address on the office PC (VPN Server). It can work behind firewalls or NATs. No network administrator's configuration required. You can use the built-in SSTP-VPN Client of Windows in your home PC.\nVPN Azure is a cloud VPN service operated by SoftEther VPN Project. VPN Azure is free of charge and available to anyone. Visit http://www.vpnazure.net/ to see details and how-to-use instructions.\n\nThe VPN Azure hostname is same to the hostname of the Dynamic DNS setting, but altering the domain suffix to ""vpnazure.net"". To change the hostname use the DynamicDnsSetHostname command.\n\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge.\nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. +CMD_VpnAzureGetStatus_Help Get and show the current status of the VPN Azure function.\n\nVPN Azure makes it easier to establish a VPN Session from your home PC to your office PC. While a VPN connection is established, you can access to any other servers on the private network of your company.\nYou don't need a global IP address on the office PC (VPN Server). It can work behind firewalls or NATs. No network administrator's configuration required. You can use the built-in SSTP-VPN Client of Windows in your home PC.\nVPN Azure is a cloud VPN service operated by SoftEther VPN Project. VPN Azure is free of charge and available to anyone. Visit http://www.vpnazure.net/ to see details and how-to-use instructions.\n\nThe VPN Azure hostname is same to the hostname of the Dynamic DNS setting, but altering the domain suffix to "vpnazure.net". To change the hostname use the DynamicDnsSetHostname command.\n\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge.\nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_VpnAzureGetStatus_Args VpnAzureGetStatus CMD_VpnAzureGetStatus_PRINT_ENABLED VPN Azure Function is Enabled CMD_VpnAzureGetStatus_PRINT_CONNECTED Connection to VPN Azure Cloud Server is Established @@ -6129,7 +6128,7 @@ CMD_VpnAzureGetStatus_PRINT_HOSTNAME Hostname of this VPN Server on VPN Azure Se # VpnAzureSetStatus command CMD_VpnAzureSetEnable Enable / Disable VPN Azure Function -CMD_VpnAzureSetEnable_Help Enable or disable the VPN Azure function.\n\nVPN Azure makes it easier to establish a VPN Session from your home PC to your office PC. While a VPN connection is established, you can access to any other servers on the private network of your company.\nYou don't need a global IP address on the office PC (VPN Server). It can work behind firewalls or NATs. No network administrator's configuration required. You can use the built-in SSTP-VPN Client of Windows in your home PC.\nVPN Azure is a cloud VPN service operated by SoftEther VPN Project. VPN Azure is free of charge and available to anyone. Visit http://www.vpnazure.net/ to see details and how-to-use instructions.\n\nThe VPN Azure hostname is same to the hostname of the Dynamic DNS setting, but altering the domain suffix to ""vpnazure.net"". To change the hostname use the DynamicDnsSetHostname command.\n\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge.\nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. +CMD_VpnAzureSetEnable_Help Enable or disable the VPN Azure function.\n\nVPN Azure makes it easier to establish a VPN Session from your home PC to your office PC. While a VPN connection is established, you can access to any other servers on the private network of your company.\nYou don't need a global IP address on the office PC (VPN Server). It can work behind firewalls or NATs. No network administrator's configuration required. You can use the built-in SSTP-VPN Client of Windows in your home PC.\nVPN Azure is a cloud VPN service operated by SoftEther VPN Project. VPN Azure is free of charge and available to anyone. Visit http://www.vpnazure.net/ to see details and how-to-use instructions.\n\nThe VPN Azure hostname is same to the hostname of the Dynamic DNS setting, but altering the domain suffix to "vpnazure.net". To change the hostname use the DynamicDnsSetHostname command.\n\nTo execute this command, you must have VPN Server administrator privileges. \nThis command cannot be run on VPN Bridge.\nYou cannot execute this command for Virtual Hubs of VPN Servers operating as a cluster. CMD_VpnAzureSetEnable_Args VpnAzureSetEnable [yes|no] CMD_VpnAzureSetEnable_[yes|no] Specify 'yes' to enable VPN Azure. 'no' to disable it. CMD_VpnAzureSetEnable_PROMPT Enable VPN Azure (yes / no): @@ -6165,8 +6164,8 @@ CMD_VersionGet_5 Tipo de OS CMD_PasswordSet Set the password to connect to the VPN Client service. CMD_PasswordSet_Help You can make it mandatory to input a password for occasions when the Command Line Management Utility and the VPN Client Manager connect to a VPN Client service to control it. You can use this command to set the password that must be input. \nYou can also make it mandatory for this password to be input when doing remote operations (from a computer that is not localhost) CMD_PasswordSet_Args PasswordSet [password] [/REMOTEONLY:yes|no] -CMD_PasswordSet_[password] Specify the password you wish to set. You can delete the password setting by specifying ""none"". -CMD_PasswordSet_REMOTEONLY Specify ""yes"" to only require the password to be input when operation is done remotely (from a computer that is not localhost). This stops the password being required when the connection is from localhost. When this parameter is omitted, it will be regarded as ""no"". +CMD_PasswordSet_[password] Specify the password you wish to set. You can delete the password setting by specifying "none". +CMD_PasswordSet_REMOTEONLY Specify "yes" to only require the password to be input when operation is done remotely (from a computer that is not localhost). This stops the password being required when the connection is from localhost. When this parameter is omitted, it will be regarded as "no". # PasswordGet command @@ -6299,7 +6298,7 @@ CMD_AccountList_Args AccountList # AccountCreate command CMD_AccountCreate Criar nova configuração de conexão VPN... -CMD_AccountCreate_Help Use this to create a new VPN Connection Setting on the VPN Client. \nTo create a VPN Connection Setting, in addition to specifying the VPN Connection Setting name and destination server as initial parameters and the destination virtual Hub, and user name, you must also specify the name of the virtual network adapter to use. When a new VPN Connection Setting is created, the type of user authentication is initially set as Anonymous Authentication and the proxy server setting and the verification options of the server certificate is not set. To change these settings and other advanced settings after the VPN Connection Setting has been created, use the other commands that begin with the name ""Account"". +CMD_AccountCreate_Help Use this to create a new VPN Connection Setting on the VPN Client. \nTo create a VPN Connection Setting, in addition to specifying the VPN Connection Setting name and destination server as initial parameters and the destination virtual Hub, and user name, you must also specify the name of the virtual network adapter to use. When a new VPN Connection Setting is created, the type of user authentication is initially set as Anonymous Authentication and the proxy server setting and the verification options of the server certificate is not set. To change these settings and other advanced settings after the VPN Connection Setting has been created, use the other commands that begin with the name "Account". CMD_AccountCreate_Args AccountCreate [name] [/SERVER:hostname:port] [/HUB:hubname] [/USERNAME:username] [/NICNAME:nicname] CMD_AccountCreate_[name] Specify the name of the VPN Connection Setting to create. CMD_AccountCreate_SERVER Specify the host name and port number of the destination VPN Server using the format [host name:port number]. You can also specify by IP address. @@ -6318,13 +6317,13 @@ CMD_AccountSet Set the VPN Connection Setting Connection Destination CMD_AccountSet_Help Use this to set, for the VPN Connection Setting registered on the VPN Client, the destination VPN Server host name and port number, Virtual Hub name, user name used for connection and virtual network adapter name to use. CMD_AccountSet_Args AccountSet [name] [/SERVER:hostname:port] [/HUB:hubname] CMD_AccountSet_[name] Specify the name of the VPN Connection Setting whose setting you want to change. -CMD_AccountSet_SERVER Specify the host name and port number of the destination VPN Server using the format ""host name:port number"". You can also specify by IP address. +CMD_AccountSet_SERVER Specify the host name and port number of the destination VPN Server using the format "host name:port number". You can also specify by IP address. CMD_AccountSet_HUB Specify the Virtual Hub on the destination VPN Server. # AccountGet command CMD_AccountGet Get Setting of VPN Connection Setting -CMD_AccountGet_Help Use this to get the VPN Connection Setting contents of a VPN Connection Setting registered on the VPN Client. \nTo change the VPN Connection Setting contents of the VPN Connection Setting, use the other commands that begin with the name ""Account"" after creating the VPN Connection Setting. +CMD_AccountGet_Help Use this to get the VPN Connection Setting contents of a VPN Connection Setting registered on the VPN Client. \nTo change the VPN Connection Setting contents of the VPN Connection Setting, use the other commands that begin with the name "Account" after creating the VPN Connection Setting. CMD_AccountGet_Args AccountGet [name] CMD_AccountGet_[name] Specify the name of the VPN Connection Setting whose setting you want to get. @@ -6358,7 +6357,7 @@ CMD_AccountPasswordSet_Help Use this to set the user auth type to Password Authe CMD_AccountPasswordSet_Args AccountPasswordSet [name] [/PASSWORD:password] [/TYPE:standard|radius] CMD_AccountPasswordSet_[name] Specify the name of the VPN Connection Setting whose setting you want to change. CMD_AccountPasswordSet_PASSWORD Specify the password to use for password authentication. If this is not specified, a prompt will appear to input the password. -CMD_AccountPasswordSet_TYPE Specify either ""standard"" (Standard Password Authentication) or ""radius"" (RADIUS or NT Domain Authentication) as the password authentication type. +CMD_AccountPasswordSet_TYPE Specify either "standard" (Standard Password Authentication) or "radius" (RADIUS or NT Domain Authentication) as the password authentication type. CMD_AccountPasswordSet_Prompt_Type Especificar padrão ou radius: CMD_AccountPasswordSet_Type_Invalid The standard or radius specification is invalid. @@ -6534,12 +6533,12 @@ CMD_AccountDetailSet_[name] Specify the name of the VPN Connection Setting whose CMD_AccountDetailSet_MAXTCP Specify, using an integer in the range 1 to 32, the number of TCP connections to be used for VPN communication. By using data transmission by multiple TCP connections for VPN communication sessions with VPN Servers it is sometimes possible to increase communication speed. \nNote: We recommend about 8 lines when the connection lines to the server are fast, and 1 line when using a slow connection such as dialup. CMD_AccountDetailSet_INTERVAL When communicating by VPN by establishing multiple TCP connections, specify in seconds, the establishing interval for each TCP connection. The standard value is 1 second. CMD_AccountDetailSet_TTL When specifying connection life of each TCP connection specify in seconds the keep-alive time from establishing a TCP connection until disconnection. If 0 is specified, keep-alive will not be set. -CMD_AccountDetailSet_HALF Specify ""yes"" when enabling half duplex mode. When using two or more TCP connections for VPN communication, it is possible to use Half Duplex Mode. By enabling half duplex mode it is possible to automatically fix data transmission direction as half and half for each TCP connection. In the case where a VPN using 8 TCP connections is established, for example, when half-duplex is enabled, communication can be fixes so that 4 TCP connections are dedicated to the upload direction and the other 4 connections are dedicated to the download direction. -CMD_AccountDetailSet_BRIDGE Specify ""yes"" when connecting to the VPN Server using Bridge / Router Mode. When using Bridge / Router Mode to connect, it is possible to provide bridging or routing to another network on the side of the virtual network adapter of the VPN Client. However, if the security policy of the user who is being used for connection denies the use of bridges or routing, then connection will fail. -CMD_AccountDetailSet_MONITOR Specify ""yes"" when connecting to the VPN Server using Monitoring Mode. When a connection is made using Monitoring Mode, you can receive all packets that flow through the Virtual Hub. However, if the security policy of the user who is being used for connection does not allow Monitoring Mode, then connection will fail. -CMD_AccountDetailSet_NOTRACK Specify ""yes"" will disable the adjustments of routing table. Normally ""no"" is specified. -CMD_AccountDetailSet_NOQOS Specify ""yes"" when disabling VoIP / QoS functions. Normally ""no"" is specified. -CMD_AccountDetailSet_DISABLEUDP Specify ""yes"" when disabling UDP acceleration function. Normally ""no"" is specified. +CMD_AccountDetailSet_HALF Specify "yes" when enabling half duplex mode. When using two or more TCP connections for VPN communication, it is possible to use Half Duplex Mode. By enabling half duplex mode it is possible to automatically fix data transmission direction as half and half for each TCP connection. In the case where a VPN using 8 TCP connections is established, for example, when half-duplex is enabled, communication can be fixes so that 4 TCP connections are dedicated to the upload direction and the other 4 connections are dedicated to the download direction. +CMD_AccountDetailSet_BRIDGE Specify "yes" when connecting to the VPN Server using Bridge / Router Mode. When using Bridge / Router Mode to connect, it is possible to provide bridging or routing to another network on the side of the virtual network adapter of the VPN Client. However, if the security policy of the user who is being used for connection denies the use of bridges or routing, then connection will fail. +CMD_AccountDetailSet_MONITOR Specify "yes" when connecting to the VPN Server using Monitoring Mode. When a connection is made using Monitoring Mode, you can receive all packets that flow through the Virtual Hub. However, if the security policy of the user who is being used for connection does not allow Monitoring Mode, then connection will fail. +CMD_AccountDetailSet_NOTRACK Specify "yes" will disable the adjustments of routing table. Normally "no" is specified. +CMD_AccountDetailSet_NOQOS Specify "yes" when disabling VoIP / QoS functions. Normally "no" is specified. +CMD_AccountDetailSet_DISABLEUDP Specify "yes" when disabling UDP acceleration function. Normally "no" is specified. CMD_AccountDetailSet_Eval_MaxTcp Specify an integer in the range 1 to 32 for the number of TCP connections. CMD_AccountDetailSet_Eval_Interval Set at least 1 second for the interval to establish a TCP connection. CMD_AccountDetailSet_Prompt_MaxTcp Number of TCP Connections to Use in VPN Communication: @@ -6622,9 +6621,9 @@ CMD_AccountRetrySet Set Interval between Connection Retries for Connection Failu CMD_AccountRetrySet_Help When a VPN Connection Setting registered on the VPN Client is specified and that VPN Connection Setting attempts to connect to a VPN Server, use this to specify the interval to wait between connection attempts and the limit of how many times to retry connecting when communication with the VPN Server has been disconnected or when the connection process failed. \nIf the user authentication type is Smart Card Authentication, no connection retry will be performed regardless of the Number of Connection Attempts setting. CMD_AccountRetrySet_Args AccountRetrySet [name] [/NUM:num_retry] [/INTERVAL:retry_interval] CMD_AccountRetrySet_[name] Specify the name of the VPN Connection Setting whose setting you want to change. -CMD_AccountRetrySet_NUM Specify the number of times to make consecutive retries. By specifying ""999"", there will be limitless attempts to reconnection (always connect). By specifying ""0"", not attempt at reconnection will be made. +CMD_AccountRetrySet_NUM Specify the number of times to make consecutive retries. By specifying "999", there will be limitless attempts to reconnection (always connect). By specifying "0", not attempt at reconnection will be made. CMD_AccountRetrySet_INTERVAL When attempting a reconnection, this sets how many seconds to wait after the previous disconnection or connection failure before starting the reconnection process. -CMD_AccountRetrySet_PROMPT_NUM Reconnection Count (""999"" is unlimited): +CMD_AccountRetrySet_PROMPT_NUM Reconnection Count ("999" is unlimited): CMD_AccountRetrySet_PROMPT_INTERVAL Reconnection Interval (Seconds): CMD_AccountRetrySet_EVAL_INTERVAL Specify 5 seconds or more for the retries interval. @@ -6659,7 +6658,7 @@ CMD_AccountImport_Args AccountImport [path] CMD_AccountImport_[path] Specify the file name of the import source. CMD_AccountImport_PROMPT_PATH Import Source File Name: CMD_AccountImport_FAILED_PARSE Unable to correctly parse the specified file. Please check it if the file was exported correctly. -CMD_AccountImport_OK The VPN Connection Setting ""%s"" has been imported. +CMD_AccountImport_OK The VPN Connection Setting "%s" has been imported. # RemoteEnable command @@ -6693,14 +6692,14 @@ CMD_RemoteDisable_Args RemoteDisable CMD_MakeCert Create New X.509 Certificate and Private Key (1024 bit) CMD_MakeCert_Help Use this to create a new X.509 certificate and private key and save it as a file. \nThe algorithm used to create the public key and private key of the certificate is RSA 1024 bit. \nYou can choose to create a root certificate (self-signed certificate) or a certificate signed by another certificate. To create a certificate that is signed by another certificate, you require a private key file (base 64 encoded) that is compatible with the certificate that uses the signature (X.509 format file). \n\nWhen creating a certificate, you can specify the following: Name (CN), Organization (O), Organization Unit (OU), Country (C), State (ST), Locale (L), Serial Number, and Expiration Date. \nThe created certificate will be saved as an X.509 format file and the private key file will be saved in a Base 64 encoded RSA 1024 bit format file. \n\nThe MakeCert command is a tool that provides the most rudimentary function for creating certificates. If you want to create a more substantial certificate, we recommend that you use either free software such as OpenSSL, or commercial CA (certificate authority) software. \n\nNote: This command can be called from the SoftEther VPN Command Line Management Utility. You can also execute this command while connected to the current VPN Server or VPN Client in Administration Mode but, what actually performs the RSA computation, generates the certificate data and saves it to file is the computer on which the command is running, and all this is executed in a context that has absolutely no relationship to the computer that is the destination of the Administration Mode connection. CMD_MakeCert_Args MakeCert [/CN:cn] [/O:o] [/OU:ou] [/C:c] [/ST:st] [/L:l] [/SERIAL:serial] [/EXPIRES:expires] [/SIGNCERT:signcert] [/SIGNKEY:signkey] [/SAVECERT:savecert] [/SAVEKEY:savekey] -CMD_MakeCert_CN Specify the Name (CN) item of the certificate to create. You can specify ""none"". -CMD_MakeCert_O Specify the Organization (O) item of the certificate to create. You can specify ""none"". -CMD_MakeCert_OU Specify the Organization Unit (OU) item of the certificate to create. You can specify ""none"". -CMD_MakeCert_C Specify the Country (C) item of the certificate to create. You can specify ""none"". -CMD_MakeCert_ST Specify the State (ST) item of the certificate to create. You can specify ""none"". -CMD_MakeCert_L Specify the Locale (L) item of the certificate to create. You can specify ""none"". -CMD_MakeCert_SERIAL Specify the Serial Number item of the certificate to create. Specify using hexadecimal values. You can specify ""none"". -CMD_MakeCert_EXPIRES Specify the Expiration Date item of the certificate to create. If you specify ""none"" or ""0"", 3650 days (approx. 10 years) will be used. You can specify a maximum of 10950 days (about 30 years). +CMD_MakeCert_CN Specify the Name (CN) item of the certificate to create. You can specify "none". +CMD_MakeCert_O Specify the Organization (O) item of the certificate to create. You can specify "none". +CMD_MakeCert_OU Specify the Organization Unit (OU) item of the certificate to create. You can specify "none". +CMD_MakeCert_C Specify the Country (C) item of the certificate to create. You can specify "none". +CMD_MakeCert_ST Specify the State (ST) item of the certificate to create. You can specify "none". +CMD_MakeCert_L Specify the Locale (L) item of the certificate to create. You can specify "none". +CMD_MakeCert_SERIAL Specify the Serial Number item of the certificate to create. Specify using hexadecimal values. You can specify "none". +CMD_MakeCert_EXPIRES Specify the Expiration Date item of the certificate to create. If you specify "none" or "0", 3650 days (approx. 10 years) will be used. You can specify a maximum of 10950 days (about 30 years). CMD_MakeCert_SIGNCERT For cases when the certificate to be created is signed by an existing certificate, specify the X.509 format certificate file name to be used to sign the signature. When this parameter is omitted, such signature signing is not performed and the new certificate is created as a root certificate. CMD_MakeCert_SIGNKEY Specify a private key (RSA, base-64 encoded) that is compatible with the certificate specified by /SIGNCERT. CMD_MakeCert_SAVECERT Specify the file name to save the certificate you created. The certificate is saved as an X.509 file that includes a public key that is RSA format 1024 bit. @@ -6724,14 +6723,14 @@ CMD_MakeCert_ERROR_GEN_FAILED Creation of certificate and private key failed. CMD_MakeCert2048 Create New X.509 Certificate and Private Key (2048 bit) CMD_MakeCert2048_Help Use this to create a new X.509 certificate and private key and save it as a file. \nThe algorithm used to create the public key and private key of the certificate is RSA 2048 bit. \nYou can choose to create a root certificate (self-signed certificate) or a certificate signed by another certificate. To create a certificate that is signed by another certificate, you require a private key file (base 64 encoded) that is compatible with the certificate that uses the signature (X.509 format file). \n\nWhen creating a certificate, you can specify the following: Name (CN), Organization (O), Organization Unit (OU), Country (C), State (ST), Locale (L), Serial Number, and Expiration Date. \nThe created certificate will be saved as an X.509 format file and the private key file will be saved in a Base 64 encoded RSA 2048 bit format file. \n\nThe MakeCert command is a tool that provides the most rudimentary function for creating certificates. If you want to create a more substantial certificate, we recommend that you use either free software such as OpenSSL, or commercial CA (certificate authority) software. \n\nNote: This command can be called from the SoftEther VPN Command Line Management Utility. You can also execute this command while connected to the current VPN Server or VPN Client in Administration Mode but, what actually performs the RSA computation, generates the certificate data and saves it to file is the computer on which the command is running, and all this is executed in a context that has absolutely no relationship to the computer that is the destination of the Administration Mode connection. CMD_MakeCert2048_Args MakeCert2048 [/CN:cn] [/O:o] [/OU:ou] [/C:c] [/ST:st] [/L:l] [/SERIAL:serial] [/EXPIRES:expires] [/SIGNCERT:signcert] [/SIGNKEY:signkey] [/SAVECERT:savecert] [/SAVEKEY:savekey] -CMD_MakeCert2048_CN Specify the Name (CN) item of the certificate to create. You can specify ""none"". -CMD_MakeCert2048_O Specify the Organization (O) item of the certificate to create. You can specify ""none"". -CMD_MakeCert2048_OU Specify the Organization Unit (OU) item of the certificate to create. You can specify ""none"". -CMD_MakeCert2048_C Specify the Country (C) item of the certificate to create. You can specify ""none"". -CMD_MakeCert2048_ST Specify the State (ST) item of the certificate to create. You can specify ""none"". -CMD_MakeCert2048_L Specify the Locale (L) item of the certificate to create. You can specify ""none"". -CMD_MakeCert2048_SERIAL Specify the Serial Number item of the certificate to create. Specify using hexadecimal values. You can specify ""none"". -CMD_MakeCert2048_EXPIRES Specify the Expiration Date item of the certificate to create. If you specify ""none"" or ""0"", 3650 days (approx. 10 years) will be used. You can specify a maximum of 10950 days (about 30 years). +CMD_MakeCert2048_CN Specify the Name (CN) item of the certificate to create. You can specify "none". +CMD_MakeCert2048_O Specify the Organization (O) item of the certificate to create. You can specify "none". +CMD_MakeCert2048_OU Specify the Organization Unit (OU) item of the certificate to create. You can specify "none". +CMD_MakeCert2048_C Specify the Country (C) item of the certificate to create. You can specify "none". +CMD_MakeCert2048_ST Specify the State (ST) item of the certificate to create. You can specify "none". +CMD_MakeCert2048_L Specify the Locale (L) item of the certificate to create. You can specify "none". +CMD_MakeCert2048_SERIAL Specify the Serial Number item of the certificate to create. Specify using hexadecimal values. You can specify "none". +CMD_MakeCert2048_EXPIRES Specify the Expiration Date item of the certificate to create. If you specify "none" or "0", 3650 days (approx. 10 years) will be used. You can specify a maximum of 10950 days (about 30 years). CMD_MakeCert2048_SIGNCERT For cases when the certificate to be created is signed by an existing certificate, specify the X.509 format certificate file name to be used to sign the signature. When this parameter is omitted, such signature signing is not performed and the new certificate is created as a root certificate. CMD_MakeCert2048_SIGNKEY Specify a private key (RSA, base-64 encoded) that is compatible with the certificate specified by /SIGNCERT. CMD_MakeCert2048_SAVECERT Specify the file name to save the certificate you created. The certificate is saved as an X.509 file that includes a public key that is RSA format 2048 bit. @@ -6744,22 +6743,22 @@ CMD_TrafficClient_Help Use this to execute the communication throughput measurem CMD_TrafficClient_Args TrafficClient [host:port] [/NUMTCP:numtcp] [/TYPE:download|upload|full] [/SPAN:span] [/DOUBLE:yes|no] [/RAW:yes|no] CMD_TrafficClient_[host:port] Specify the host name or IP address and port number that the communication throughput measurement tool server (TrafficServer) is listening for. If the port number is omitted, 9821 will be used. CMD_TrafficClient_NUMTCP Specify the number of TCP connections to be concurrently established between the client and the server for data transfer. If omitted, 32 will be used. -CMD_TrafficClient_TYPE Specify the direction of data flow when throughput measurement is performed. Specify one of the following options: ""download"", ""upload"" or ""full"". By specifying ""download"" the data will be transmitted from the server side to the client side. By specifying ""upload"" the data will be transmitted from the client side to the server side. By specifying ""full"", the data will be transferred in both directions. When ""full"" is specified, the NUMTCP value must be an even number of two or more (half the number will be used for concurrent TCP connections in the download direction and the other half will be used in the upload direction). If this parameter is omitted, ""full"" will be used. -CMD_TrafficClient_SPAN Specify, using seconds, the time span to conduct data transfer for the measurement of throughput. If this parameter is omitted, ""15"" will be used. -CMD_TrafficClient_DOUBLE When ""yes"" is specified, the throughput of the measured result will be doubled and then displayed. This option is used for cases when a network device etc. is somewhere on the data route and the total throughput capability that is input and output by this network device is being measured. -CMD_TrafficClient_RAW By specifying ""yes"", the calculation will not make corrections for the TCP/IP header and MAC header data volume. +CMD_TrafficClient_TYPE Specify the direction of data flow when throughput measurement is performed. Specify one of the following options: "download", "upload" or "full". By specifying "download" the data will be transmitted from the server side to the client side. By specifying "upload" the data will be transmitted from the client side to the server side. By specifying "full", the data will be transferred in both directions. When "full" is specified, the NUMTCP value must be an even number of two or more (half the number will be used for concurrent TCP connections in the download direction and the other half will be used in the upload direction). If this parameter is omitted, "full" will be used. +CMD_TrafficClient_SPAN Specify, using seconds, the time span to conduct data transfer for the measurement of throughput. If this parameter is omitted, "15" will be used. +CMD_TrafficClient_DOUBLE When "yes" is specified, the throughput of the measured result will be doubled and then displayed. This option is used for cases when a network device etc. is somewhere on the data route and the total throughput capability that is input and output by this network device is being measured. +CMD_TrafficClient_RAW By specifying "yes", the calculation will not make corrections for the TCP/IP header and MAC header data volume. CMD_TrafficClient_EVAL_NUMTCP Specify a value of 32 or less for the number of TCP connections. CMD_TrafficClient_PROMPT_HOST Measurement Server Name and Port Number (9821 if omitted): -CMD_TrafficClient_ERROR_NUMTCP When the data direction is ""full"" (both directions), you must specify an even value for the number of TCP connections (/NUMTCP). +CMD_TrafficClient_ERROR_NUMTCP When the data direction is "full" (both directions), you must specify an even value for the number of TCP connections (/NUMTCP). CMD_TrafficClient_ERROR_HOSTPORT The host name or port number is incorrectly specified. # TrafficServer command CMD_TrafficServer Run Network Traffic Speed Test Tool in Server Mode -CMD_TrafficServer_Help Use this to execute the communication throughput measurement tool's server program. \nTwo commands, TrafficClient and TrafficServer, are used for the communication throughput measurement tool to enable the measurement of communication throughput that can be transferred between two computers connected by IP network. \nTo set the TCP port of this computer to the Listen status to listen for the connection from the TrafficClient of another computer, specify the port number and start the server program using the TrafficServer command. \nYou can display more detailed information on the communication throughput measurement tool by inputting ""TrafficClient ?"". \n\nNote: This command can be called from the SoftEther VPN Command Line Management Utility. You can also execute this command while connected to the current VPN Server or VPN Client in Administration Mode but, what actually conducts communication and measures the throughput is the computer on which the command is running, and all this is executed in a context that has absolutely no relationship to the computer that is the destination of the Administration Mode connection. +CMD_TrafficServer_Help Use this to execute the communication throughput measurement tool's server program. \nTwo commands, TrafficClient and TrafficServer, are used for the communication throughput measurement tool to enable the measurement of communication throughput that can be transferred between two computers connected by IP network. \nTo set the TCP port of this computer to the Listen status to listen for the connection from the TrafficClient of another computer, specify the port number and start the server program using the TrafficServer command. \nYou can display more detailed information on the communication throughput measurement tool by inputting "TrafficClient ?". \n\nNote: This command can be called from the SoftEther VPN Command Line Management Utility. You can also execute this command while connected to the current VPN Server or VPN Client in Administration Mode but, what actually conducts communication and measures the throughput is the computer on which the command is running, and all this is executed in a context that has absolutely no relationship to the computer that is the destination of the Administration Mode connection. CMD_TrafficServer_Args TrafficServer [port] [/NOHUP:yes|no] CMD_TrafficServer_[port] Specify, using an integer, the port number at which to listen for the connection. If the specified port has been already being used by another program, or if the port cannot be opened, an error will occur. -CMD_TrafficServer_NOHUP When ""yes"" is specified, the server process never stops without regard to any input from the console. It is convenient when you want to run the TrafficServer endlessly. +CMD_TrafficServer_NOHUP When "yes" is specified, the server process never stops without regard to any input from the console. It is convenient when you want to run the TrafficServer endlessly. # Internal message strings concerning TrafficClient / TrafficServer @@ -6886,20 +6885,20 @@ SW_COMPONENTS_REQUIRE_ADMIN Installation Requires Administrators Privileges SW_COMPONENTS_REQUIRE_ADMIN_TEXT You have to restart the setup wizard by a user who has Administrators privileges to install %s in the System Mode. To install in the System Mode, click Back. SW_DIR_SELECT Por favor, especifique o diretório para instalar SW_DIR_MORE_THAN_110 The directory name is too long.\r\nSpecify 110 letters at most. -SW_DIR_WRITE_ERROR Unable to create the specified directory ""%s"" or failed to write a file on the directory.\r\n\r\nSpecify another directory. -SW_DIR_DST_IS_SAME_TO_SRC The specified directory ""%s"" is same as the source directory. -SW_DIR_IS_NOT_HDD The specified directory ""%s"" is not a local hard disk drive.\r\n\r\nTo install %s in the System Mode, you have to specify a directory on a local hard disk drive. -SW_DIR_IS_NOT_FULLPATH The directory ""%s"" is not a format of full path.\r\n\r\nPlease specify the full path of the directory. +SW_DIR_WRITE_ERROR Unable to create the specified directory "%s" or failed to write a file on the directory.\r\n\r\nSpecify another directory. +SW_DIR_DST_IS_SAME_TO_SRC The specified directory "%s" is same as the source directory. +SW_DIR_IS_NOT_HDD The specified directory "%s" is not a local hard disk drive.\r\n\r\nTo install %s in the System Mode, you have to specify a directory on a local hard disk drive. +SW_DIR_IS_NOT_FULLPATH The directory "%s" is not a format of full path.\r\n\r\nPlease specify the full path of the directory. SW_DIR_DST_IS_OTHER_PRODUCT The specified directory has another component already installed.\r\n\r\nPlease specify another directory. SW_DIR_DST_IS_NEWER Newer version of the software has been installed on the specified directory.\r\n\r\nYou need not to install this version. SW_DIR_DST_IS_NEWER_2 Newer version of the software has been installed on the specified directory.\r\n\r\nThis installer will import and apply the VPN Connection Settings which is built-in on the Easy Installer. No program files will be overwritten. -SW_DIR_DST_IS_BROKEN Unable to read a file ""%s"" which is on the specified directory.\r\n\r\nPlease specify another directory. +SW_DIR_DST_IS_BROKEN Unable to read a file "%s" which is on the specified directory.\r\n\r\nPlease specify another directory. SW_DIR_DST_IS_SYSTEM_MODE The same software is already installed on the specified directory as the System Mode.\r\n\r\nPlease specify another directory. SW_DIR_DST_IS_USER_MODE The same software is already installed on the specified directory as the User Mode.\r\n\r\nPlease specify another directory. -SW_SYSTEM_MODE_ALREADY_INSTALLED The software ""%s"" is already installed on this computer as the System Mode.\r\n\r\nBoth the System Mode and the User Mode installation of the same software on the same computer will conflict.\r\n\r\nDo you really want to continue the installation as the User Mode? +SW_SYSTEM_MODE_ALREADY_INSTALLED The software "%s" is already installed on this computer as the System Mode.\r\n\r\nBoth the System Mode and the User Mode installation of the same software on the same computer will conflict.\r\n\r\nDo you really want to continue the installation as the User Mode? SW_NOT_INSTALL_SRC The setup program has been executed from outside an install source.\r\n\r\nUnable to continue the installation. -SW_SETUPLOG_CORRUPTED The ""setuplog.dat"" file is broken. -SW_MSI_UNINSTALL_FAILED The older version of %s (Product Code: ""%S"") is installed. Windows Installer failed to uninstall this older version.\r\n\r\nPlease uninstall this older version manually and restart this installer again. +SW_SETUPLOG_CORRUPTED The "setuplog.dat" file is broken. +SW_MSI_UNINSTALL_FAILED The older version of %s (Product Code: "%S") is installed. Windows Installer failed to uninstall this older version.\r\n\r\nPlease uninstall this older version manually and restart this installer again. SW_MSI_UNINSTALL_REBOOT_REQUIRED Windows Installer has uninstalled the older version of %s. The reboot of computer is required.\r\n\r\nPress Finish button and reboot the computer MANUALLY, and restart this installer after the reboot. SW_NOTICE_VPNSERVER_IS_INSTALLED SoftEther VPN Bridge is selected as a component to install. However, this computer has already had SoftEther VPN Server installed.\r\n\r\nUsually, you don't need to install both SoftEther VPN Server and SoftEther VPN Bridge on the same computer.\r\nIf you install both software, conflicts such as port number duplication will occur.\r\nIf you want to replace the SoftEther VPN Server to SoftEther VPN Bridge, you should exit this installer, uninstall SoftEther VPN Server and restart this installer after that.\r\n\r\nDo you really want to continue the SoftEther VPN Bridge installation? SW_NOTICE_VPNBRIDGE_IS_INSTALLED SoftEther VPN Server is selected as a component to install. However, this computer has already had SoftEther VPN Bridge installed.\r\n\r\nUsually, you don't need to install both SoftEther VPN Bridge and SoftEther VPN Server on the same computer.\r\nIf you install both software, conflicts such as port number duplication will occur.\r\nIf you want to replace the SoftEther VPN Server to SoftEther VPN Server, you should exit this installer, uninstall SoftEther VPN Bridge and restart this installer after that.\r\n\r\nDo you really want to continue the SoftEther VPN Server installation? @@ -6918,17 +6917,17 @@ SW_OTHER_INSTANCE_EXISTS Another SoftEther VPN Setup Wizard is running.\r\n\r\nY SW_PERFORM_MSG_WEB_INFO Compiling the VPN Client Web Installer... SW_WEB_ERROR_MSG Failed to create a VPN Client Web Installer. SW_INSTALLER_CACHE_IS_NOT_SIGNED The currently installed SoftEther VPN Client of this computer has not been installed from the digital-signed package signed by an Authenticode digital certificate of SoftEther VPN Project.\r\nIt might be installed from a customized installer (for example, an installer created by Easy Installer Creator.)\r\n\r\nIf you continue to create a Web Installer, a warning message will be appeared on the user's screen when its loading.\r\nTo avoid showing the warning message, you should cancel this creating wizard, download the latest version of SoftEther VPN Client from the SoftEther VPN Project's web site, re-install it and restart the Web Installer Creator wizard.\r\n\r\nDo you really to continue to create a Web Installer? -SW_FILE_NOT_FOUNT The file ""%s"" not found. -SW_WEB_FINISHED The Web Installer is created and saved as ""%s"".\r\n\r\nPlease extract inner files from the ZIP file, upload them into the Web server, and edit a HTML file and an inf file to replace URLs appropriately.\r\n\r\nThe explanation to deploy the Web Installer is described on the ZIP file. +SW_FILE_NOT_FOUNT The file "%s" not found. +SW_WEB_FINISHED The Web Installer is created and saved as "%s".\r\n\r\nPlease extract inner files from the ZIP file, upload them into the Web server, and edit a HTML file and an inf file to replace URLs appropriately.\r\n\r\nThe explanation to deploy the Web Installer is described on the ZIP file. SW_VG_CONFIRM_MSG Do you really want to install and activate the VPN Gate P2P Relay Function plug-in module with SoftEther VPN Client?\r\n\r\nThis plug-in will realize the stability of communication to bypass the government censorship firewall. However, the communication of VPN Gate usually consumes some network bandwidth. VPN Gate is not recommended to be used in the mobile connections. \r\n\r\nPlease note that there are some countries and regions which have the regulation to forbid the encrypted communications to bypass government censorship firewalls. In such a case, you must not use the VPN Gate functions on your computer. VPN Gate is intended to be used mainly in Japan. VPN Gate is a research project for just academic purpose only. VPN Gate is governed under the Japanese laws. Other countries' laws are none of our concerns nor responsibilities. By using this software and service, you must observe all concerned laws and rules with your own responsibility. You will be completely liable to any damages and responsibilities which are results of using this software and service, regardless of either inside or outside of Japan's territory. SW_PERFORM_MSG_INIT_TASKS Preparando as tarefas... SW_PERFORM_MSG_COPY_PREPARE Preparando a cópia de arquivos... -SW_PERFORM_MSG_WRITE_ERROR Failed to write the destination file ""%s"".\r\n\r\nThere might be another person who has been keeping this file open.\r\nIf programs or services of %s are running, please terminate them and click Retry. -SW_PERFORM_MSG_COPY_FILE Copying ""%s"" ... -SW_PERFORM_MSG_SET_SECURITY Setting a security on ""%s"" ... +SW_PERFORM_MSG_WRITE_ERROR Failed to write the destination file "%s".\r\n\r\nThere might be another person who has been keeping this file open.\r\nIf programs or services of %s are running, please terminate them and click Retry. +SW_PERFORM_MSG_COPY_FILE Copying "%s" ... +SW_PERFORM_MSG_SET_SECURITY Setting a security on "%s" ... SW_PERFORM_MSG_PLUGIN Installing the plugins... -SW_PERFORM_MSG_STOP_SVC Stopping the ""%s"" service ... -SW_PERFORM_MSG_WAIT_FOR_FILE_UNLOCK The file ""%s"" is locked by a running program. Waiting to unlock... +SW_PERFORM_MSG_STOP_SVC Stopping the "%s" service ... +SW_PERFORM_MSG_WAIT_FOR_FILE_UNLOCK The file "%s" is locked by a running program. Waiting to unlock... SW_PERFORM_MSG_INSTALL_SVC Installing the %s service... SW_PERFORM_MSG_START_SVC Starting the %s service... SW_PERFORM_MSG_CREATE_LINKS Criando atalhos... @@ -6938,14 +6937,14 @@ SW_PERFORM_MSG_REGISTER_UNINSTALL Registering uninstall information on the Contr SW_PERFORM_MSG_IMPORTING_ACCOUNT Importing the Built-in VPN Connection Setting in the Easy Installer... SW_PERFORM_MSG_DELETE_SETUP_INFO Deleting the install information and logs... SW_PERFORM_MSG_WRITE_LOG Writing a setup log... -SW_PERFORM_MSG_COPY_ERROR Copying to the file ""%s"" failed. -SW_PERFORM_MSG_CREATE_LINK_ERROR Creating the shortcut file ""%s"" failed.\r\n\r\nDo you want to retry? -SW_PERFORM_MSG_WRITE_LOG_ERROR Creating the setup log file ""%s"".\r\n\r\nDo you want to retry? -SW_PERFORM_MSG_STOP_SVC_ERROR Stopping the ""%s"" service (internal name: ""%S"") failed. -SW_PERFORM_MSG_START_SVC_ERROR Starting the ""%s"" service (internal name: ""%S"") failed. -SW_PERFORM_MSG_SVC_UNINSTALL_FAILED Uninstall of the ""%s"" service (internal name: ""%S"") failed. -SW_PERFORM_MSG_SVC_INSTALL_FAILED Install of the ""%s"" service (internal name: ""%S"") failed. -SW_PERFORM_MSG_SVC_USERMODE_EXEC_FAILED Starting the user-mode service ""%s"" failed. +SW_PERFORM_MSG_COPY_ERROR Copying to the file "%s" failed. +SW_PERFORM_MSG_CREATE_LINK_ERROR Creating the shortcut file "%s" failed.\r\n\r\nDo you want to retry? +SW_PERFORM_MSG_WRITE_LOG_ERROR Creating the setup log file "%s".\r\n\r\nDo you want to retry? +SW_PERFORM_MSG_STOP_SVC_ERROR Stopping the "%s" service (internal name: "%S") failed. +SW_PERFORM_MSG_START_SVC_ERROR Starting the "%s" service (internal name: "%S") failed. +SW_PERFORM_MSG_SVC_UNINSTALL_FAILED Uninstall of the "%s" service (internal name: "%S") failed. +SW_PERFORM_MSG_SVC_INSTALL_FAILED Install of the "%s" service (internal name: "%S") failed. +SW_PERFORM_MSG_SVC_USERMODE_EXEC_FAILED Starting the user-mode service "%s" failed. SW_PERFORM_MSG_UPDATING Updating system settings... SW_PERFORM_MSG_DELETE_NIC Removendo os adaptadores de rede virtuais... SW_PERFORM_MSG_FINISHED Setup progress finished. @@ -6953,9 +6952,9 @@ SW_PERFORM_MSG_UNINSTALL_MSI Windows Installer is uninstalling the older version SW_PERFORM_MSG_UPDATE_LANG_CONFIG Changing the language settings... SW_PERFORM_MSG_INIT_UNINST Preparando a desinstalação... SW_PERFORM_MSG_DELETE_PREPARE Preparando para excluir arquivos... -SW_PERFORM_MSG_DELETE_ERROR Unable to delete the file ""%s"".\r\n\r\nThere might be another program who is keeping this file open.\r\nIf programs or services of %s are running, please terminate them and click Retry. -SW_PERFORM_MSG_UNINSTALL_SVC Uninstalling the ""%s"" service ... -SW_PERFORM_MSG_DELETE Deleting the ""%s"" service ... +SW_PERFORM_MSG_DELETE_ERROR Unable to delete the file "%s".\r\n\r\nThere might be another program who is keeping this file open.\r\nIf programs or services of %s are running, please terminate them and click Retry. +SW_PERFORM_MSG_UNINSTALL_SVC Uninstalling the "%s" service ... +SW_PERFORM_MSG_DELETE Deleting the "%s" service ... SW_PERFORM_MSG_EASY_INIT Building the Easy Installer... SW_PERFORM_MSG_WEB_INIT Building the Web Installer... SW_PERFORM_MSG_INSTALL_SELOW Creating a restore point of the system and installing essential components. It may take a while... @@ -6978,7 +6977,7 @@ SW_LONG_VPNBRIDGE Edição de desenvolvedor do SoftEther VPN Bridge SW_LONG_VPNSMGR Edição de desenvolvedor do gerenciador SoftEther VPN Servidor SW_LONG_VPNCMGR Edição de desenvolvedor do gerenciador SoftEther VPN Cliente SW_LANG_SET_FAILED Failed to write the new language setting on lang.config file. -"# --- end of ""Do not translate this section"" ---" +# --- end of "Do not translate this section" --- # Shortcuts Filenames