Merge pull request #1085 from paulmenzel/remove-trailing-spaces-from-comments

Remove trailing spaces from comments

src/bin/hamcore/empty_sevpnclient.config

@@ -1,7 +1,7 @@
 # Software Configuration File
-# 
+#
 # You can edit this file when the program is not working.
-# 
+#
 declare root
 {
 	bool DontSavePassword false

src/bin/hamcore/openvpn_sample.ovpn

@@ -1,11 +1,11 @@
 ###############################################################################
 # OpenVPN 2.0 Sample Configuration File
 # for PacketiX VPN / SoftEther VPN Server
-# 
+#
 # !!! AUTO-GENERATED BY SOFTETHER VPN SERVER MANAGEMENT TOOL !!!
-# 
+#
 # !!! YOU HAVE TO REVIEW IT BEFORE USE AND MODIFY IT AS NECESSARY !!!
-# 
+#
 # This configuration file is auto-generated. You might use this config file
 # in order to connect to the PacketiX VPN / SoftEther VPN Server.
 # However, before you try it, you should review the descriptions of the file
@@ -13,7 +13,7 @@
 # If necessary, you have to modify a little adequately on the file.
 # For example, the IP address or the hostname as a destination VPN Server
 # should be confirmed.
-# 
+#
 # Note that to use OpenVPN 2.0, you have to put the certification file of
 # the destination VPN Server on the OpenVPN Client computer when you use this
 # config file. Please refer the below descriptions carefully.
@@ -43,7 +43,7 @@ push-peer-info
 
 ###############################################################################
 # Specify the type of the layer of the VPN connection.
-# 
+#
 # To connect to the VPN Server as a "Remote-Access VPN Client PC",
 #  specify 'dev tun'. (Layer-3 IP Routing Mode)
 #
@@ -57,7 +57,7 @@ dev $TAG_TUN_TAP$
 # Specify the underlying protocol beyond the Internet.
 # Note that this setting must be correspond with the listening setting on
 # the VPN Server.
-# 
+#
 # Specify either 'proto tcp' or 'proto udp'.
 
 proto $TAG_PROTO$
@@ -66,18 +66,18 @@ proto $TAG_PROTO$
 ###############################################################################
 # The destination hostname / IP address, and port number of
 # the target VPN Server.
-# 
+#
 # You have to specify as 'remote <HOSTNAME> <PORT>'. You can also
 # specify the IP address instead of the hostname.
-# 
+#
 # Note that the auto-generated below hostname are a "auto-detected
 # IP address" of the VPN Server. You have to confirm the correctness
 # beforehand.
-# 
+#
 # When you want to connect to the VPN Server by using TCP protocol,
 # the port number of the destination TCP port should be same as one of
 # the available TCP listeners on the VPN Server.
-# 
+#
 # When you use UDP protocol, the port number must same as the configuration
 # setting of "OpenVPN Server Compatible Function" on the VPN Server.
 
@@ -86,7 +86,7 @@ $TAG_BEFORE_REMOTE$remote $TAG_HOSTNAME$ $TAG_PORT$
 
 ###############################################################################
 # The HTTP/HTTPS proxy setting.
-# 
+#
 # Only if you have to use the Internet via a proxy, uncomment the below
 # two lines and specify the proxy address and the port number.
 # In the case of using proxy-authentication, refer the OpenVPN manual.
@@ -97,7 +97,7 @@ $TAG_BEFORE_REMOTE$remote $TAG_HOSTNAME$ $TAG_PORT$
 
 ###############################################################################
 # The encryption and authentication algorithm.
-# 
+#
 # The default setting is compatible with most clients. Modify it as you prefer.
 # It is recommended to use a better algorithm if your client supports it.
 # When you specify an unsupported algorithm, an error will occur.
@@ -108,7 +108,7 @@ auth SHA1
 
 ###############################################################################
 # Other parameters necessary to connect to the VPN Server.
-# 
+#
 # It is not recommended to modify it unless you have a particular need.
 
 resolv-retry infinite
@@ -120,7 +120,7 @@ verb 3
 
 ###############################################################################
 # Authentication with credentials.
-# 
+#
 # Comment the line out in case you want to use the certificate authentication.
 
 auth-user-pass
@@ -128,7 +128,7 @@ auth-user-pass
 
 ###############################################################################
 # The certificate file of the destination VPN Server.
-# 
+#
 # The CA certificate file is embedded in the inline format.
 # You can replace this CA contents if necessary.
 # Please note that if the server certificate is not a self-signed, you have to
@@ -141,10 +141,10 @@ $CA$
 
 ###############################################################################
 # Client certificate and key.
-# 
+#
 # A pair of client certificate and private key is required in case you want to
 # use the certificate authentication.
-# 
+#
 # To enable it, uncomment the lines below.
 # Paste your certificate in the <cert> block and the key in the <key> one.
 

src/bin/hamcore/strtable_pt_br.stb

@@ -7,7 +7,7 @@
 # Copyright (c) Daiyuu Nobori, SoftEther Project at University of Tsukuba, and SoftEther Corporation.
 
 
-# 
+#
 
 
 # https://www.softether.org/

src/bin/hamcore/strtable_ru.stb

@@ -1,7 +1,7 @@
 # SoftEther VPN String Table
 # Copyright (c) all contributors on SoftEther VPN project in GitHub.
 # Copyright (c) Daiyuu Nobori, SoftEther Project at University of Tsukuba, and SoftEther Corporation.
-# 
+#
 # https://www.softether.org/
 
 

src/bin/hamcore/strtable_tw.stb

@@ -1,7 +1,7 @@
 # SoftEther VPN String Table
 # Copyright (c) all contributors on SoftEther VPN project in GitHub.
 # Copyright (c) Daiyuu Nobori, SoftEther Project at University of Tsukuba, and SoftEther Corporation.
-# 
+#
 # https://www.softether.org/
 #
 # Contributors:

src/bin/hamcore/vpninstall_ko.inf

@@ -1,13 +1,13 @@
 # SoftEther VPN Client Web Installer Configuration File
 # (The sample file for VPN Client Web Installer)
-# 
+#
 # Copyright (c) SoftEther Project at University of Tsukuba, Japan.
 # All Rights Reserved.
-# 
+#
 # Modify the contents of this file to deploy a Web Installer.
-# 
+#
 # Note: Encoding format must be UTF-8.
-# 
+#
 # Lines start with "#" are comments.
 
 

src/bin/hamcore/vpninstall_tw.inf

@@ -1,14 +1,14 @@
 # SoftEther VPN Client 自動安裝設定檔
 # (為了 VPN Client Web 安裝程式的樣品設定檔)
-# 
+#
 # Copyright (c) SoftEther Project at University of Tsukuba, Japan.
 # All Rights Reserved.
-# 
+#
 # 製作簡易 Web 安裝程式的時候，請編輯這個檔的內容。
-# 
+#
 # ※ 如果在這個檔內包含中文等的 2 位元組字元，
 #    字元編碼請使用 UTF-8。
-# 
+#
 # 文字 "#" 在 (sharp) 開始的行是評語。